Thank you for making a video. I had so many steps to my own functional stickers. I would created on Canve then go to Cricut design space. This way is so much easier.
There is not a no fill option in the updated version of Cricut design space. What do I do instead at this point when your talking about no fill at around 3:30? Thanks for your help, Ive been trying to make stickers forever and having a difficult time
What did you have your blade set to? For some reason our blade kept cutting too deep or not deep enough and we got annoyed and haven’t touched the cricut in a year lol
I know this is an older video, but instead of using 2 sets of circles-one to print and one to cut...you just click "flatten" and it automatically makes it a print/cut image and you don't need to do that extra step...I was hoping you would mention what setting you used to cut these using clear sticker paper. I usually use a custom option but wasn't sure what would cut the sticker and not through the paper in the back. I have never cut clear sticker paper before. Only white before
Thanks for the comment! The reason why I didn’t flatten is because I wanted the cut to be small than the actual colour circle (essentially to allow for more bleed) but you can certainly just do the one set! For the setting,I always use “sticky note” for my stickers! Thanks so much for watching!
THANK YOU FOR THIS!! i was struggling so bad on how to get my text to print and get the stickers themselves to be cut out and just couldn’t get it. i watched this today and was able to complete my first sticker sheet 😭
Do you manually make all the cut dots instead of using the print and cut bleed function so that the dots are more perfect circles when printed and it just looks nicer on the sheet? I think for beginners I’d recommend starting with just using the bleed option to save a lot of time ☺️ I can see how if you are selling them though the bleed wouldn’t look quite as nice
Oooo that’s such a good idea! I never even thought to do that as I was just trying to get a more perfect circle bit totally agree that bleed function would probably work! I should try that, have you used it with stickers before?
I just hand cut the rectangle sheets after! I’m sure you could do the dye cut from cricut but would have to run it through again since you can only choose the one cut type! If you know another way please let me know!
@@MomYePlans so for your dot stickers when you were picking the color, that was just to know what it’d look like. At what point did you go from the cricut to the printer back to the cricut to cut?
Thank you so much! It’s the guide that cricut design space has, if you look in the settings I think it’s call snap something? Sorry it’s not that useful, I just haven’t done anything with it since I got it but let me know if you Can’t find it!
When I followed these directions, they printed perfectly (thank you) but they didn’t stay on the background sheet. They all printed individually and I had little dots all over the place when I took the paper off the mat. What did I do wrong?
It came our great! My only issue was that my Cricut explore air 2's cut was still a little off. I even turned off my room light so the sensor could focus. Not really sure what to do. Does anyone have any ideas?
Super cute love them
Thanks so much for watching!!
Thank you for making a video. I had so many steps to my own functional stickers. I would created on Canve then go to Cricut design space. This way is so much easier.
Thanks for watching love! Yesss I used to use procreate first and it would take foreverrrrrrrrrr
There is not a no fill option in the updated version of Cricut design space. What do I do instead at this point when your talking about no fill at around 3:30? Thanks for your help, Ive been trying to make stickers forever and having a difficult time
What did you have your blade set to? For some reason our blade kept cutting too deep or not deep enough and we got annoyed and haven’t touched the cricut in a year lol
Thank you for this video
Yay! It’s so much fun! I’m excited for you to start ❤️
I know this is an older video, but instead of using 2 sets of circles-one to print and one to cut...you just click "flatten" and it automatically makes it a print/cut image and you don't need to do that extra step...I was hoping you would mention what setting you used to cut these using clear sticker paper. I usually use a custom option but wasn't sure what would cut the sticker and not through the paper in the back. I have never cut clear sticker paper before. Only white before
Thanks for the comment! The reason why I didn’t flatten is because I wanted the cut to be small than the actual colour circle (essentially to allow for more bleed) but you can certainly just do the one set! For the setting,I always use “sticky note” for my stickers! Thanks so much for watching!
Thank you so much for the video. I finally made some stickers. Great video. I can’t wait till the next cricut tutorial.
Yay thanks so much for watching! Let me know what else you’d like to see!
Thank you so much for sharing! This is very helpful.
Thank you for watching!
THANK YOU FOR THIS!! i was struggling so bad on how to get my text to print and get the stickers themselves to be cut out and just couldn’t get it. i watched this today and was able to complete my first sticker sheet 😭
😭😭 omg thank youuu for watching and for the comment! It’s always sooo nice to hear when the videos actually help you guys out! ❤️
What material do you select to get the kiss cut effect on the sticker and not have them cut right through?
I use the sticky note setting!
There’s a sticky note setting on cricut? I didn’t see that!!
I can’t find the fill button - help! It’s not where yours is
Do you manually make all the cut dots instead of using the print and cut bleed function so that the dots are more perfect circles when printed and it just looks nicer on the sheet? I think for beginners I’d recommend starting with just using the bleed option to save a lot of time ☺️ I can see how if you are selling them though the bleed wouldn’t look quite as nice
Oooo that’s such a good idea! I never even thought to do that as I was just trying to get a more perfect circle bit totally agree that bleed function would probably work! I should try that, have you used it with stickers before?
@@MomYePlans I have and it works for me! Might work on some printers better than others, but you could try! 😊
Do you hand cut the rectangle sheets or can you set the Cricut to do both kiss cuts and dye cuts?
I just hand cut the rectangle sheets after! I’m sure you could do the dye cut from cricut but would have to run it through again since you can only choose the one cut type! If you know another way please let me know!
@@MomYePlans Yep! I figured it out. Thank you! Is the sticker paper you use more of a paper or plastic texture?
So does the cricut print? Like the color/ink of the dots? Or are you printing in a printer first then cutting with your cricut?
The cricut only cuts and it can also draw with a pen but for stickers and such you have to print it on the printer first unfortunately!
@@MomYePlans so for your dot stickers when you were picking the color, that was just to know what it’d look like. At what point did you go from the cricut to the printer back to the cricut to cut?
So you send it to your printer from your cricut so you still need to pick the colour to tell your printer what colour to print it
It’s very intuitive through cricut design space it will tell you when to go to the printer and back!
@@MomYePlans ok gotcha. Thank you for explaining. I greatly appreciate it!
Great video!! How do you get your circles to line up perfectly? I noticed multiple lines while you were aligning them up.
Thank you so much! It’s the guide that cricut design space has, if you look in the settings I think it’s call snap something? Sorry it’s not that useful, I just haven’t done anything with it since I got it but let me know if you Can’t find it!
When I followed these directions, they printed perfectly (thank you) but they didn’t stay on the background sheet. They all printed individually and I had little dots all over the place when I took the paper off the mat. What did I do wrong?
Did you attach it to the background? Make sure you select everything and hit attach ☺️
@@MomYePlans yes I did. It cut through the paper all the way. I used different paper and it worked. Thanks again!
It came our great! My only issue was that my Cricut explore air 2's cut was still a little off. I even turned off my room light so the sensor could focus. Not really sure what to do. Does anyone have any ideas?
Have you tried calibrating your machine first? I found that helped! Thanks for watching!
You just solve my problems with my stickers ! 🤍 It was so helpful thank you a lot 🌸
Yay! I’m so glad I could help! Thanks for watching ❤️