Audi S5 engine mounts replacement fully guided
Вставка
- Опубліковано 2 лис 2021
- Best way to save $1000 replacing my engine mounts myself and alone. Hard job but doable. The engine mount on all models of Audi will fail due to their design. You can follow my instructions and replace the mounts yourself. Subscribe for more contents of the Audi S5.
Subscribe to our channel: bit.ly/3r3vd5M
Warning: this is a little bit complex, but if you have problem during the installation just drop a comment for clarification. It is straightforward, but involves a lot of efforts and time.
Audi A5/A4/A3 (B8/B8.5)
Engine support bar: amzn.to/3tmZOwT
Drive Impact Socket Set: amzn.to/3czObf9
Triple Square Spline Bit Socket Set: amzn.to/3czOqqz
Trolley Jack Car Lift: amzn.to/30Jlo2q
Jack Stands: amzn.to/3vtJtZa
Instruction from 034M: bit.ly/3qQrKYn
Before I changed my motors mounts under acceleration the tire near the bad mount would literally JUMP and you will feel it jumping under sudden acceleration. Audi OEM motor mounts will fail after or before 50K miles so it is a good idea to replace them. Check my diagnostic video to access the damage yourself.
Diagnostic of bad motor mount for my Audi s5 V8 MT. A lot of vibration can tell you your motor mounts are bad, broken or exploded. This situation applies to all the Audi models. A3 A4 A5 A6 A7 A8 S3 S4 S5 S6 S7 S8
The S5 and S4 with 3.0T will experience the same problems, also any recent 3.0T, 2.0T will. Under hard acceleration your car will have some non linear movements mostly up and down, and slightly to either left or right.
#audis5
#AudiS5issues
#audiS5badmotormount - Авто та транспорт
you will find if you connect it to vcds it will have a code stored which you need to reset, thanks for the video.
Good video. Nice job and straight to the point.
amazing video. Much appreciated helped me a lot!
Good video brother thank you an may God bless you!!
Great video love it ❤
Thanks for the guide, I tried using the Audi manual which says remove the air con pump and alternator but there is no space to remove aircon pump. Now I am doing it your way, its a lot of bolts but I just got the mounts out! Now I am looking forward to rebuilding the front end, Cheers
How did it go?
@@RoxusRemo Tricky on my own but got there in the end, changing suspension as well so not on the road yet, cheers
Just got mine done, thank you for the awesome video! What were the torque specs for the two engine mount bolts and the rest?
I am about do to the mounts on my Sq5. This video was vary informative because the process will be almost the same.
Did you have a check engine light for your failed mount?
no my car did not have any check engine light. It was just from vibration and harshness that I decided to check (in my other video) then decided to replace in this video
Audi SQ5 2015... can bad ruined engine mount can cause gearbox hard and weird shifting? Or make like a safe mode on gear when turn into a street???
Yes
Hello, great vídeo. Did you replace also the volta?
The bolts*
Where are you? I’ll pay you to fix mine. I’m in south East massachusetts
Thanks for the great video. How was your alignment after you were done?
You're welcome. Yes the alignment was good at first. I didn't have any issues the following weeks. A year later I started to have some clunky noise. I went to a mechanic shop after trying to find and fix myself but nothing. The submrafe bolt came loose and was making noise due to the load etc....but I think my problem started after I had the mechanic installed lowering springs that's a few months later that I got clunky noise issues which needed the subframe to be realigned and torque.
Was your old motor mount leaking fluid? I think my driver side motor mount is shot, noticing a lot more vibration on idle and when coming to a stop, plus I see a little smoke coming out from the driver side bank as if the fluid is leaking onto part of the cat or something hot thus creating smoke