Building an Aquarium Stand (5'x2'x2') - Part Two
Вставка
- Опубліковано 7 лип 2024
- Finishing off my tank stand. Check out my other video on how to build the frame.
CAMERA GEAR USED:
• My camera - amzn.to/3lwuEiX
• Camera lens - amzn.to/2IF45cM
• Microphone - amzn.to/2UmMSHS
• SD card - amzn.to/3f48Mcr
• Tripod - amzn.to/2GZFqzr
• Vlogging tripod - amzn.to/2Uqx7Qo
• Studio lights - amzn.to/3lufVp1
OFFICIAL MERCH:
teespring.com/en-GB/stores/si...
• Follow Me On Other Social Media Platforms •
Instagram ► bit.ly/2B3dI0V ◄
Facebook ► bit.ly/2MegTrK ◄
Twitter ► bit.ly/2P6J2yz ◄
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product with these links I may receive a small commission. There is no additional charge to you! Thank you for supporting Simply Shrimps.
#ItsAllAboutShrimps #SimplyShrimps #Aquarium - Домашні улюбленці та дикі тварини
Wow! You rock!! I have seen many frames like that, but I simply loved how you tuned it up and made place for all the gears. Excellent!
I’m a woodworker and have watched a lot of build videos here on the UA-cam. Great build, great video, great job. Keep it up. 💯
FANTASTIC. Great job. Clean and well made.
Cheers! :D
excellent. Love the red and black
Cheers 🍻
I'm definitely taking notes to build mine, cheers mate
I like the colors, similar to the Circa 1880, Red Chinese Lacquer furniture and the black trim is a nice touch. I’m impressed. Thanks for sharing.
That was a nice built cabinet. You should put the water flow at one corner instead of the inlet and outlet at opposite corners. It is logical, but the fact that if you put the out flow up to create water wave, when the flow the end of the glass wall, the water turns around to the bottom of the tank and goes right back to the inlet. That is the most effective way to suck up all the waste from the tank.
looks awesome and professional, red looks great!
Thank you! I do quite like how the red turned out :)
A little advise from a painter take it how you’d like lol, use a little roller (weenie roller) it’s way faster and applies coats more evenly. Also this applies to anything that you need to prime first. Get the primer tinted near the color of you finish coat, so for that I would get the primer tinted red, that way you will need way less coats and it will save you a lot of time.
You live and you learn. Thanks for the tip :)
@@SimplyShrimps of course man, figured id share my knowledge
Thank you very much I'm very excited about getting started on my own stand. I bought a fish tank bar top but it did not come with a stand and I wanted to do something nice instead of cinder blocks so I'm very happy you posted this
Thanks, good luck if you decide to build one 😁
Nice job. I have built several 125 gallon tank stands. Each time I paint all the framing before I put it together. This saves alot of time. I then go back and do any touch ups from scrapes and other accidents. I add dollar store SMD LED lights underneath, but I use 2 magnetic contacts that turns the lights on as soon as you open each door. I connect 2 LEDS in series, and use a 5 volt cell phone charger as a power supply for the lights. A couple of magnetic door latches as well to keep the little ones & pets out.
Great looking stand!
Thank you 🙏
Brilliant build. Very clean. 🦐
+BigShrimpin cheers 😁
Going to use this video and part one as a build guide for my bearded dragons 4x2x2 stand! This turned out incredible and looks store bought! Very nice job, thank you!
Nice job, stand looks awesome.
Thanks Jerry!
Like the colors, red and black. Really looks nice
Thank you :) The good thing about paint is you can choose what ever colours you want.
Looks great!
+goodstrong thank you 👌
Great stand well done. Love the lights inside.
Thanks! Yeah it really helps when doing maintenance underneath :D
Graham Hall haiii
Very nice... proper job!!! 👍
You've inspired me to give it a go myself. I wanted a split level timber stand for a shell dweller project. The problem is, it's too small a job for most chippies to consider. The ones that do want to charge an arm and a leg (completely their own prerogative).
I have the schematic and the tools, so no excuses really.
Incredibly awesome
Thanks you :D
Edwin from Costa Rica . Great job !!! Thank you for sharing!!! God bless you !!!
No worries 😊
Awesome build!
Thanks!
beautiful.. Using Red colour with black trim was a surprise. looks great. thumbs up.
Thanks 😁 Yeah it’s not as vivid as I thought it might turn out, which is good.
Best one I have seen so far. Thanks for the inspiration
Thanks 😁
Fantastic build awesome idea with the light underneath and well put together. I got a few more ideas because of this 👍
Glad it could help :)
Great job
Great project and mods to the inside of your stand....
Thank you :)
😂😂
I almost abandoned this video when I found out you were painting it, I also almost ditched this video when I saw you were only using ply wood for the doors... BUT I stuck it out and I'm glad I did! Nice job bro! It came out looking awesome!!
Thanks for sticking it out 😂
Really nice job
oh la la. what great project. looks awesome
It's survived there hands of time :D
All I can say is wow..... Wow..... Wow! I was so impressed with your first part video but after now watching the 2nd part, you've done such a fantastic build & as for the end result..... It looks so professional & just like a really expensive shop bought stand😊 Congratulations on a job very well done👏👏👏👏
That's looking great and the cabinet is very well organised - groovy.
+Pondguru thanks! Let’s see if I can keep it that way ha! Started on some footage for the filter :)
sweet build
Thank you :)
Nice cable management in the stand ! Good work
It’s the only way ;)
Looks great 👍🏼😉
Thanks
Pretty good at building. I like that stand definitely better than flimsy premade ones you can buy. Great job 👍
Thanks man! 😁
Well done looking good
Cheers :)
That's awsome! Got a lot of tips and value from this video mate
Thanks! I look forward to seeing yours soon then ha
Very nice build, thank you for sharing. You might want to put the canister filter in a plastic container (leakage) or your carpet/floor will be shot in no time. I didn't at first and it messed up my original stand so I'll have to build a custom one like yours now. Cheers!
Oops I’m sorry that happened to you. Yeah good idea with the container. Good luck with the new build and thanks 🙏
Well done!
Thank you :)
Nice! I'm a DYI type & that looks decent! Awesome vid.
Thanks! I happy to say it’s still standing one year on haha 😂
Awesome build bro
Cheers man!
Awesome dude
Cheers 🤘
That's cool man you did a good job
Thank you 😁
Wow ... Looks Great , i had my doubts about Red and Black but i guess i was wrong after all , nicely equipped inside can not ask for anything else Thanks for sharing , From North Carolina USA
wooa ... good job dude!
Thanks!
great finish. looks fantastic. love the contrast between the red and the black. I'm gonna build it the same way with only one difference. I need a top board (like a kitchen top kinda thing). so i'll probably end up either buying the top or making one of some nicer wood...thanks for sharing :-)
Nice !!!
You should put your filter on sliders like what you would find on cabinet drawers. It would make it easier to remove and install that big canister. 🐠
I built a similar stand but went blue and black and opted to have my panels life on and off due to space constraints. (I didn't have enough room to have them swing open. There is this nice color called Blackcat, it is as dark as dark gets but lets the grain of the wood still show through on the surface. I think that the wood would look even better on this stand if you could see the texture in the black with the gloss of the red. All in all you did a great job with this stand, and when I have more room I'll probably build my panels out like yours.
Thanks for the tip with the paint. I’ll have to look into that. Yeah I suppose it’s whatever you have room for in your home 😁
Brilliant mate going to be making my own stand like I commented on the part 1 video going to save money.
Cheers looks great 👍
very nice.. good job... lots of great ideas.
Thanks :)
Parabéns muito lindo e bem feito seu movel
I don’t understand sorry.
This is so gooooood
And still standing :) just in the garage
Wow man you are a aquarium stand building genius. I just subscribed and I really like the fluval canister filter.
Thanks for watching 😁 Yeah it’s a good filter.
Very nice build
Thanks you 😁🙏
Love the videos you make man, wish I had resources to make my own tank and stand one day so I can fully fulfill my hobby. Keep up the great content
Cheers! One day you will hopefully :D
Awesome!!
Cheers 😁
I like your video great job on the tank 👍🏻, the fx6 is a great filter good pick
Thanks :) it’s keeping the tank clean so far 😁
Dude I'm seriously impressed 👏🏼👏🏼 I'll be subbing ✊🏼
Cheers! Thanks for the support 🤘
so talented wow
Thanks
good job bro is fantastic
Thank you :)
Very good man, nice work!.
Thank you :)
Thank you :)
What an awesome stand! I will be following your videos to build a stand for my 48” X 24” X 24” ball python bio active vivarium. Thanks for the videos.
Thank you and good luck with your build :)
My build was almost the same as this one (5' x 2' x 2') but I didn't use as many inside front to back braces as you did (8 on top and 6 on base). I didn't think I needed as much because it's going to be holding up a vivarium that's 5' x 2' and 5' high but it's only going to have water approximately 1 foot deep and a waterfall coming down one corner so it wont be as heavy.
Another thing I did was make use of that side space that's usually on the inside because everyone adds plywood to keep the stand from racking or twisting. This covers up a space 3 to five inches on each end that's usually too deep to reach easily, so it goes unused. I placed that plank of plywood on the inside of the legs leaving me enough space to add a pegboard on one side to keep my nets and other supplies and shelves on the other side for all the cans and bottles of fish foods and medications.
That's a great idea! I'll have to see if I can utilise more of the space underneath :)
You should really paint that interior of cabinet :) Would be perfect then!
I really like organized cables and tubing inside. Well done!
Just a little tip. The next time you plan to paint anything red use a grey tinted primer first. It allows the finish coat to cover with fewer coats.
I did think about this, so thanks for clarifying :D I’ll be sure to try it next time thanks :)
Or pink primer!!!
Never seen pink primer, I’ll keep an eye out :)
Simply Shrimps some hardware stores may put some red tint in your primer if you ask, but it’s not common.
I like it! My suggestions is to get a micro-switch and wire your lights to turn on when you open the door automatically on the stand.
That's an awesome idea and easy enough to do! I might give it a shot in the future :) Thanks
Nice job
Thanks 😁
clean
Thanks
Hey bud, I just want to say you did a great fricken job. Keep fine tuning and sell these! Great video A+
feels inspired to make my own cabinet one day.wish i will get enough machine and resources needed for cabinet building.
Hopefully one day you do 🙂
Appreciated.. 👍
Thanks 😁
GREAT 😛
Thanks :)
Just built a stand without watching a single video. Turned out alright, but not super finished looking. Which I would've watched this, my stand would've been beautiful! Thanks for the video man. Keep up with the work you love.
Aw maybe for your next stand build ;) Thanks!
Congratulations 👏👏👏👏👏👏
I am sorry too. Well done!!! I liked your work😉
Thank you 🙏😂
Woow.. Nice, succese for u
Nice job. Painting in the kitchen, you are brave!
Thanks 😁 It was my parents kitchen ha!
SEXY stand mate - so I am no expert, but I would almost suggest covering the bottom in plywood, or something. This would keep any water from disconnect or reconnect of your filter from staining the carpet, and keeps everything else within a space easy to clean. Great video, thank you!
Cheers man! I had planned on doing this at some point. At the moment there is spare carpet under the filters to help with this issue :)
Look like easy.. but.... i cant 😂
Aarrgg great work, and nice video 👌
Thanks :) Anything is possible if you put your mind to it :P
Your cute and very creative 😍 great job on the tank stand and everything keep it cutie😍🥰
He's a dude! Get out of here.
Nice
Hi, what did you use to cover the edges on the trims @4:11?, those nails are gone, it looks nice.
It was just some framing from the wood isle in my local hardware store. There are different patterns that you can get.
Great video!! Massive inspiration, I am just about to start a build I have the tank done it's a 60" x 24" x 18" 361ltrs so just about to start on the stand but I want to be able to mount the doors all the way to the edge of the stand but I'm struggling to find a way to do that if I built the frame like you did out of 2x4 so do you think I could just purely use 18mm ply maybe laminated together to give 36mm and some 2x4 bracings in the centre to maximise the space in the cabinet because I am going to be running a sump, thanks
Thanks :D Good luck with finishing it!
good job! i will do same AQ stand like you :)
Thanks! Have fun making yours :D
Very slick! Looks like it could get up to 80 kph in a hurry! :-D It's different - I like it a lot.
Cheers! Haha it’s a racing stand ;)
Nice. Do u have any video making an aquarium canopy?
Hey mate,
you did an awesome job 👏 🙌
Really impressive and organized. Is there a fact sheet listened up all measures of wood?
Thank you 😊
Hey great video I going to build my 120 gallon like you question is what size off plywood did u use for top back and side
your thumbs up got a thumbs up ;)
...and so did your comment ;) Cheers!
Hi! Great stand, very impressive can you list all the products/materials/tools you've used please?
Да ты чувак молодец, отлично получилось.
I’m sorry I don’t understand :(
Simply Shrimps transleit : he say : it's very good work . no fanks.
Ok thanks :)
Hi I love it great job it I’m actually doing the same exact one was the red you used jus red or a certain type of red like oil base any help would be greatly appreciated also was it semi gloss or gloss thanks man
Whoa, whataman, whatashelf !
Haha thanks 😂
Nice job, was really good, I need to build a stand for 4 frog tanks ( a 2 x 2 sort of setup.) So might be stealing some of your ideas, although it doesn't need to hold nearly half the weight yours does.
Perfect Brasil
:)
Love the vid and just about done with part one! What kind of backboard did you use to face the outside of the tank? It looks great! Also, how big and how many of them did you have to buy?
Awesome build!! I've just bought a 5x2x2 tank. Gonna use your method for sure. Thank you. Is there anything you would have done differently? That maybe would have made the build easier?
Thanks you :D I would have probably used a guide for when i was using the jig saw to cut straighter. Other than that I'm still happy with the stand to this day :)
Great video, Mate, but for effsake, take off the hoodie with the long hood straps around power tools, especially if you are using a drill.
Thanks! I couldn’t agree more 🙈 I was conscious of this when making the video. But after the shot had been taken I couldn’t go back and refilm cutting/drilling new bits of wood 😂 I’m sorry for that and well picked up on. I know for next time now 😁