Interesting. I've never heard of anyone not putting a bead of silicone down before attaching the two pieces of glass together. Perhaps the added support helps but I personally wouldn't skip that step (I overbuild everything 😊). Hopefully your tank lasts a very long time. Thanks for the video....
Whats the thinking of not puting any silicone between the glass pieces? Is it that the tank was small enought and doesnt need the extra bonded support? Thanks.
Looks great.... Nice project idea... Don't think I saw this info anywhere but I didn't see any glass info as far as size, thickness, dimensions, maybe how much you paid for it so that we have an idea....
I’m an engineer. And this is totally incorrect. The layout of glass and acrylic tanks are different. Glass panels are secured to the vertical sides of bottom panel. Not resting atop like acrylic.
Can you make little clear please, because I'm also planning to make one. Please help me out, I want to make a tank for taking fish sample pictures for my research. How should be the correct way?
Is it some special type of sealant. And was this aquarium successful? Nice method. Shall i make with same method a tank of 4 feet by 1.5 by 1.5 feet? I think no need of other person also in this method.
What about glass thickness.?? In the comment you have mentioned 8mm tempered glass and 12 mm glass also which one is correct.?? And if your aquarium is still working please upload new video or shorts of your sama aquarium.. Thank you
12mm glass is more suitable for aquariums larger then 4 feet and smaller then 8 feet. And yes my aquarium is still running fine. Here is a short video : ua-cam.com/users/shortsyKOaUPaPy9M?feature=share
It is very Simple : 1- Base 5ft x 1.5ft 2- Back side 5ft x 2ft 3- Front side 5ft x 2ft 4- Left side 2ft x 1.5ft 5- Right side 2ft x 1.5ft Some supports in bottom and top … thats it
What about glass thickness.?? In the comment you have mentioned 8mm tempered glass and 12 mm glass also which one is correct.?? And if your aquarium is still working please upload new video or shorts of your sama aquarium.. Thank you
Bhai tmne wire Kahan se Bahar nikale hen q k next video me to tm ne box ko cover krdiya he plzz mjhe Batana q k me bh aise same banane jaraha hon sub wire Jo hoty hen and pipes wo tmne wooden box upper se lagane k bad kaise Bahar nekale
Well its good to see videos like this once in a while to stay normal. The moment i saw duct tape i had all the confidence in your craftsmanship and i'm pretty sure all the experienced hobbyists will agree with that. 😊 Have a few doubts apart from the build, if you could let me know. 1. How many days you let the silicone to cure ? 2. When to add water ? 3. When to add fish ? 4. How often do we need to change water and the volume ? 5. How effective is that filtration (if it is) ? Thank you 😊
The saying "a little knowledge of electricity is dangerous" applies here as well. It could be disastrous if the glass breaks not only for the fish but also for the people that surround it. I hope that anyone who wants to DIY their aquariums will be careful. That tank could be a ticking time bomb
60"Lx18"Wx24"H would be about 112gallons US. FWIW, that would call for 1/2" thick glass for the front, back and sides, and 3/4" glass on the bottom panel.
Surprised the tank has stayed together. You have run a seal round the glass but have not glued the glass together with silicone. That tank is a ticking time bomb ready to burst. Duct tape! Really? Holding it together! Anyone planning to build a tank look up some other posts and keep your floor dry!
Brother this is my 5th aquarium using this method and it has been years that my aquariums are running ... please guide us what is the right way to make it ?
This is how NOT to build a aquarium,,,, please folks don't do this... 90% percent of the strength of the the joint comes from glue between the glass contact surface... Why someone would skip this is simply stupidity...
Hrôza, sklo na sklo bez silikónu a ešte k tomu celé zasraté od lepidla... silikón sa má zotrieť v uhle stierkou ty amatér :), toto video si sem ani nemal dávať... musíš sa ešte veľa učiť ako sa správne lepia akváriá!!!
![Aquarium model 1 - How to make an aquarium - [Piece of Paper]](http://i.ytimg.com/vi/9VojggawBA8/mqdefault.jpg)
Interesting. I've never heard of anyone not putting a bead of silicone down before attaching the two pieces of glass together. Perhaps the added support helps but I personally wouldn't skip that step (I overbuild everything 😊). Hopefully your tank lasts a very long time. Thanks for the video....
Thanks for watching :)
@@DIYStoriessilicon ka Kitna kharcha hota hai
@@deepakmudgal3683 tank size??
Was the duck tape for the missing silicone between the glass panels?
Not what everyone wants but its perfect for what you wanted, you got it, well done. Many can critisize but cannot do what you have done.
Thank you very much! Your comment means a-lot ❤️
No I actually cut my own glass and glue it the right way... This will fail... Guaranteed
Not right way to make aquarium
Right
Whyy caan uh saay
Bracing should have been done at the top level part of the aquarium...not the bottom level. Euro bracing.
@@rajadey4919 If It's Planted Aquarium Then Bottom Bracing Is Needed
Not rite way to say, not the rite way to make an aquarium
Whats the thinking of not puting any silicone between the glass pieces? Is it that the tank was small enought and doesnt need the extra bonded support? Thanks.
I think the thinking was that he did not do the thinking. Every tank i have ever seen has a silicone glue joint at the edges aswell as the inner seal
I used 5 mm glass for a 3 feet × 2 feet aquarium.. Is it okay? Or i have to add extra support for glass strength??
For 3 feet 5mm is okay but make sure width is not more than 1 feet.
Crud doesnt get trapped under those inside glass supports??
😅maybe
Nop! Cuz they are sealed from every side.
Glass thickness?
Looks great.... Nice project idea... Don't think I saw this info anywhere but I didn't see any glass info as far as size, thickness, dimensions, maybe how much you paid for it so that we have an idea....
How much did it cost to buy the glass?
Assalam walekum bhai aap bahut acchi Tarika se corian banana Bata Rahe Hain aise to message log ka
How to sleep after watching a horror movie?
Silicon can’t be that strong an adhesive for top support can it? If not what’s the point?
I’m an engineer. And this is totally incorrect. The layout of glass and acrylic tanks are different. Glass panels are secured to the vertical sides of bottom panel. Not resting atop like acrylic.
Can you make little clear please, because I'm also planning to make one. Please help me out, I want to make a tank for taking fish sample pictures for my research. How should be the correct way?
Which glue used? Where will you get in online kindly reply thank you.
You don't need to put silicone between the glass where the sides meet?
Is it some special type of sealant. And was this aquarium successful? Nice method. Shall i make with same method a tank of 4 feet by 1.5 by 1.5 feet? I think no need of other person also in this method.
good video. I have a doubt. If I want to use a canister filter, where and how should the lily pipes be placed?
Achha hai video, Length 5 feet, aur breadth and height kitni hai? And 12mm glass hai ya 8mm? I want to update my current 5 feet tank.
5 feet length, 2 feet height, 1.5 feet width (8mm tempered glass)
It is recommended to use 12mm glass
Can u add the meassurements of the Glass...Individually??
What about glass thickness.?? In the comment you have mentioned 8mm tempered glass and 12 mm glass also which one is correct.?? And if your aquarium is still working please upload new video or shorts of your sama aquarium.. Thank you
12mm glass is more suitable for aquariums larger then 4 feet and smaller then 8 feet. And yes my aquarium is still running fine.
Here is a short video : ua-cam.com/users/shortsyKOaUPaPy9M?feature=share
Amaizing
How you make that 4 feet LED strip light.
Sir mai 4 feet tank banane ka soch rahu uske liye kitna mm best rahenge
you can use 8mm tempered glass or use 12mm glass.
@@DIYStories what about 8 mm
@@mustaq7648 yes I also mentioned 8mm glass., check my last comment.
how the water will be cleaned...? without any sponge filter or some other filter in your tank??
It has an under gravel filter, which recycles all the water and eventually cleans it 👍
Bhayya only tank cost howmuch
Please aap mrko jo niche joint k glasses lgaye unke size btaskte hai mene bht si video dekhli mgr mil ni rha muje
It is very Simple :
1- Base 5ft x 1.5ft
2- Back side 5ft x 2ft
3- Front side 5ft x 2ft
4- Left side 2ft x 1.5ft
5- Right side 2ft x 1.5ft
Some supports in bottom and top … thats it
What about glass thickness.?? In the comment you have mentioned 8mm tempered glass and 12 mm glass also which one is correct.?? And if your aquarium is still working please upload new video or shorts of your sama aquarium.. Thank you
Total cost kitni lagi thi banane me
All measurements of tanks
How much cost ? For all
Depends on the material you are purchasing. From which country you are ?
Bhai tmne wire Kahan se Bahar nikale hen q k next video me to tm ne box ko cover krdiya he plzz mjhe Batana q k me bh aise same banane jaraha hon sub wire Jo hoty hen and pipes wo tmne wooden box upper se lagane k bad kaise Bahar nekale
Iron stand link
Why'd you make another base
Well its good to see videos like this once in a while to stay normal. The moment i saw duct tape i had all the confidence in your craftsmanship and i'm pretty sure all the experienced hobbyists will agree with that. 😊
Have a few doubts apart from the build, if you could let me know.
1. How many days you let the silicone to cure ?
2. When to add water ?
3. When to add fish ?
4. How often do we need to change water and the volume ?
5. How effective is that filtration (if it is) ?
Thank you 😊
What kind of filter are you using? I just saw a power head
I used under gravel filter with powerhead.
How is the filter made
aquarium height and breadth please 🙏🏻
Muhje bhi ek 5 feet tank benwana hai total kitna cost aayega 3 feet ka 8mm me do tank hai mere pass abhi
I cannot even begin to explain how many things went wrong here. lol “run filter for 24 hrs” hahahahha 🤦♂️
You got guts bro i am to afraid to try to build my own
Simply brilliant.
It actually isn't, though. This is a disaster waiting to happen.
Very nice achievement, my sincere greetings.
Thank you very much!
What is the duct tape around the outside of the tank for?
Maybe support so that the glass doesn't fall out
Cover up unsightly glue marks
Size?
Damn. Great friggin work!!👏 But, all that amazing effort for goldfish???
Hey buddy. What's wrong with goldfish?? Smh
كم هو قياس الحوض الطول في العرض في الارتفاع
Good 🎉
Thank you
The saying "a little knowledge of electricity is dangerous" applies here as well. It could be disastrous if the glass breaks not only for the fish but also for the people that surround it. I hope that anyone who wants to DIY their aquariums will be careful. That tank could be a ticking time bomb
wish I had this big
12mm or 10mm Glass
12mm
Come on, 8 tempered or 12 regular ? Your replies in comments seem like you don't have a clue what you paid for...
Not what I want holding water in my home. Caulking done completely wrong.
This is 19th century...
Yes right but this is how i made it, there might be different techniques as well.
Glass ki kinari pe cilicon pest nai kiya aapne.
silicon kia tha par video ma dikhana bhool gya.
@@DIYStories If that's the case then you've to re-upload as a lot of ppl are gonna make it the wrong way.
Nice bro
Thanks
It's a mizing
Thanks
برافو.. pravo
Thanks
What's the actual Tank size ???
5 feet
60"Lx18"Wx24"H would be about 112gallons US. FWIW, that would call for 1/2" thick glass for the front, back and sides, and 3/4" glass on the bottom panel.
How much did all the glass cost?
Where do I get this glass? Lol
GLASS THIKKNES ?
Wao. So nice
Thanks
What is the thickness of the glass?
Its 8mm
@@DIYStories 8mm? I don't believe you. So if the thickness of your glass is 8mm, it's not safe for the 5feet tank.
@@davecruz3914 this is a tempered glass !
No way this is right up have to put some silicone between the glass too
that autofocus is out of control
0 filtration not good for fish plus headache of daily waterchange
This video is made by a professionals don't try this at home! It's cheaper to buy a new one
I learned it myself.
That is Great !
Aur aap keha se ho bro apna no sand karo aap bena doge tank 5 feet ka
It wounld be too heavy
7×2.5×2.5 feet tank 16 mm ok
Ban keo silikon that su la dang cap!
Surprised the tank has stayed together. You have run a seal round the glass but have not glued the glass together with silicone. That tank is a ticking time bomb ready to burst. Duct tape! Really? Holding it together! Anyone planning to build a tank look up some other posts and keep your floor dry!
Absolutely not the way to build a tank at all asking for disaster 😳😳
Brother this is my 5th aquarium using this method and it has been years that my aquariums are running ... please guide us what is the right way to make it ?
But but .....its held together by duct tape??? like for real?
Consulta Mi amigo tu acuario No está ciclado y as puesto peces así no mas es mi opinión .
😂😂😂Просто лютая жесть, сказ о том как нельзя делать😅
Чтоя сейчас посмотрел ,))) так нельзя делать аквариум
sorry, but this is the wrong method for building an aquarium. the tank won't last too long
Certo..che poteva essere siliconato molto meglio..
Je ne voudrais pas cet aquarium chez moi.... le silicone est horrible... le duc tape partout 😂😂
Pipe kyu? Why pipe?
It's called undergravel filter
Yes this was an under gravel filter made up of pvc pipes...
@@DIYStoriesbut... Where does all the dirt and dust goes and stores? Any sump?
Dislike..because you don't have any idea about how to use silicon glue..you just messed it
All that for some shitty goldfish? Btw that does not look 5 foot it looks closer to 3 lol
Lol
This is how NOT to build a aquarium,,,, please folks don't do this... 90% percent of the strength of the the joint comes from glue between the glass contact surface... Why someone would skip this is simply stupidity...
La video aurais due s’appeler ,,,, la meilleur facon de mal faire un aquarium🤦🏻♂️. Jamais les coter sur le font et tjr coller
What a pathetic way of making an aquarium
This is time bomb LUL
Not how you put it together but, good job misinforming people
Hrôza, sklo na sklo bez silikónu a ešte k tomu celé zasraté od lepidla... silikón sa má zotrieť v uhle stierkou ty amatér :), toto video si sem ani nemal dávať... musíš sa ešte veľa učiť ako sa správne lepia akváriá!!!
Don't use this method to make aquarium 😔 not safe
Не робіть так як в цьому "кіно" !!!
The worst and dangerous method to do an aquarium! Stay away from this example.
This is one of the worst ways to do this.
Total sab faltu way hai
Worst aquarium built ever
Not the right way at alllllll
Fake video