Making Homemade Lathe Milling Attachment For Compound Slider And Tool Post

#Homemadelathe #Homademadelathecrossslider #mrranyhomemade
Making Homemade Lathe Milling Attachment For Compound Slider And Tool Post
New projects homemade lathes bed (second lathe)
Hello UA-camr, today I’m glad to share my new second homemade lathes.
I do happy to make a bigger size because my first lathe the size is a bit small, when milling a big plate of thick metal is not easy because the length is not enough space to milling than the plate metal I used is thin most are 10 mm thick.
So I decided to make a new lathe bigger than the previous lathe. Now there is enough experience to make a new lathe also.
I hope you all enjoying my new lathe from part 1.
• #Diy #Craft #Tools Do ...
• Homemade Lathe Machine...
• Awesome Cutting slider...
• #homemadecuttingslider...
Dear all beloved fans and subscribers,
Welcome to my channel Mr.Rany Homehome.
Today, I have new video about:
I would like to show you how to make local furniture made of steal, iron, wooden products. Hope you enjoy watching my activity.
-Awesome ideas
-Tips
-Craft
-How to make
-Create Ideas
-DIY
-Life Hack
-Others
Please help me to like, comment,share and subscribe my channel to reach my goal 100,000 subscribers.
With regards
Mr.Rany Homemade

[@graedonmunro1793]

fantastic result!!👍👍sounds peaceful wherever you are..

[@mr.ranyhomemade2466]

Thanks for your best time I will try my hard work to be best.
I am Cambodia one of the small country southeast asian.

[@mardyseanofficial9502]

You did the great job, brother. Lovely video.

[@mr.ranyhomemade2466]

Thank you for reaching I do hope you enjoyed my work.

[@ferriswhitehouse1476]

You're an inspiration. I hope I can replicate your work, thank you for sharing!

[@joaoviana3251]

Belo trabalho na construçao de maquina caseira. muito o brigado

[@medshop2931]

عمل رائع جدا شكرا جزيلا

[@mr.ranyhomemade2466]

Thanks for your comment

[@GhzhsFsghssj-et1ij]

So amazing your creative

[@mr.ranyhomemade2466]

I appreciate for your best time to watch my hard work.

[@devurandom2019]

Nice Work!

[@1crazypj]

That was actually a neat way to fabricate a 'T' slot.
I was thinking you may need to modify bolt heads so they can't spin in the future when things wear in.
220mm is a big diameter for a small lathe, I couldn't do it as my lathe doesn't slow down enough. (500rpm is slowest it goes)
I have used an angle grinder bolted in place of tool post to grind larger diameters around 185mm

[@mr.ranyhomemade2466]

Thanks for your introduction it very hard for me everything I made is from my mind no one tells me you make this or that. this machine is my dream. I will change some part is possible.

[@1crazypj]

@@mr.ranyhomemade2466 To be honest, a heavier lathe is always better as it won't vibrate so much and is more stable.
If possible, fill hollow area's with hydraulic cement/concrete (not 'ordinary' Portland cement) as it doesn't shrink and is much much cheaper than epoxy.
I trained on much bigger lathes and actually owned a very nice Colchester for a few years but had to sell it when I moved

[@bulletproofpepper2]

Thanks for sharing.

[@mr.ranyhomemade2466]

Thank you for your patience 🙏🙏🙏

[@oficinacupimdeferroalysson4048]

Trabalho De Mestre My Friend directo Do Brasil Paraíba 🇧🇷🇧🇷

[@mr.ranyhomemade2466]

Thank you

Olá meu amigo, muito bem elaborado, essa ideia ficou fantástica da até vontade de mudar o meu!!!Esse modelo ficou muito pratico, parabéns pela qualidade de trabalho e projeto sempre!!!!
Abraço e boa sorte com muita saúde e cada vez mais sucesso!!!

[@mr.ranyhomemade2466]

Olá meu amigo, como vai você? como é o seu trabalho ? bem, vou tentar o meu melhor, sabia que é um trabalho árduo, o problema não é nenhum equipamento, como fazer, posso dizer 60% feito à mão, então tudo parece lento, como um acessório de fresagem, apenas 4 peças, fiz 4 dias. obrigado novamente

[@sundarAKintelart]

Very nice.

[@cokhichetao72]

The master 👍

[@mr.ranyhomemade2466]

Thank you for reaching I do hope enjoy

[@MrPov5]

Nice

[@mr.ranyhomemade2466]

Thanks for your watching

[@DontCallMeGarage]

what's with the coke spoon on your pinky finger?

[@embitnawai3190]

How much motor bos

[@mr.ranyhomemade2466]

Sorry what did you mean

[@embitnawai3190]

@@mr.ranyhomemade2466 boss, how many watts do you use???

[@mr.ranyhomemade2466]

Sorry I don’t understand what you’re mean 🙂

[@embitnawai3190]

@@mr.ranyhomemade2466 how many watts does the boss use

[@mr.ranyhomemade2466]

Thanks
For milling attachment I used 3 pieces

[@cdrive5757]

I love your work but I hate rusty tools and machines. There's no pleasure watching neglected machines. Please clean up and lube your hard work. They deserve it!
Wakodahatchee Chris

[@mr.ranyhomemade2466]

Thanks I appreciated your suggestion I will try my best you knew better than me please let me know
Thanks 🙏

[@RB-yq7qv]

😃😃😃😃😃😃😃😃😃😃😃😃

[@mr.ranyhomemade2466]

Thank you for reaching I do hope enjoy my homemade

[@Armanufacturingskills]

Nice

[@mr.ranyhomemade2466]

Thank you for reaching