I'm learning so much from you! You do things beyond what I even imagine, and best part, you do it on a mini-lathe. It's like learning from an expert, but specifically for my limited lathe, or as you have demonstrated, fully capable lathe.
Nice design and upgrade, love it. If anyone from a factory in China is watching, I won't be surprised to see this design in small lathes in the future 🤣
@@aceroadholder2185 And it needs quite fine tolerances to work properly. Not something they´d like to make on a machine that is for people who are often just buying their first machine tool and don´t know the importance of it.
Super awesome...BRAVO!! I don't know if I will be able to do this on my lathe as well... it's very beautiful precision work...!! Super génial...BRAVO !! je ne sais pas si je serai capable de faire aussi cela sur mon tour... c'est du très beau travail de précision...!!
A very satisfying and helpful video. While watching your video, I was forced to open a beer and sit comfortably in a chair and relax. Thank you. This is what I needed. Greetings from Poland.
Nice use of what appear to be diesel fuel injector pins as transfer punches. I have a number of them around the workshop, you need to anneal the striking end to prevent them sending out splinters.
Prossima modifica potresti creare un meccanismo a vite senza fine per regolare l angolo di inclinazione, al posti di muovere manualmemte la torretta .volevo chiederti una cosa : ,ho un tornio vevor , e i taglienti sono piu alti del centro di 1 millimetro e anche più, con i pezzi piccoli è un problema, sai come risolverla ?. Se arano più bassi bastavano spessori ma così? Che faccio? Rettifico tutte le aste dei taglienti o modifico la torretta ?
FIRST, FIRST, CONGRATULATIONS ON THE TOP PROJECT. TELL ME SOMETHING, WHICH WHITE MATERIAL IS THIS THAT YOU USED TO INSULATE THE PIECE TO HEAT IT AND PUT IT IN THE OIL? WHAT'S HIS NAME ? I REALIZED THAT EVEN AT ALMOST 1000 °C IT DOES NOT BURN.
@@cda32 for small bench lathes I think it would be rigid enough - it is as rigid or more than your average morse taper tooling in milling machines. You cannot compare it to a big engine lathe or solid tool post mounts.
Très belle réalisation ! J'ai acheté un tour chinois chez VEVOR et je suis très déçus car même après les réglage des jeux, ca coince du coté de la poupée fixe et du coté de la poupée mobile il y a beaucoup de jeu. Après avoir vérifier le banc avec une règle je me suis rendu compte qu'il n'était pas rectiligne (Défaut d'usinage ou de moulage) .
Sorry but i try in German. Wenn Sie den Drehpunktdiameter reduzieren, erhöhen Sie die Instabilität . Sie hätte besser den kompletten Konus umgearbeitet, oder den Quersupport verbreitert. Auch die Stapelung in der Z-Achse sehe ich problematisch. Dennoch viel Erfolg . Greetings from Berlin/ Germany
If you have a round Cylinder, then diameter reduce. Thank it was instable Cylinder. The Support must bigger ?. Sorry for my fucking english, round about 40j. Old
Один винт М4 стягивает и удерживает от проворота резцедержатель при силовом точении ? Слабо верится. Иногда на двух штатных болтах прямого зажима может провернуть. Нельзя положиться на данную конструкцию.
Привіт, як називається підтримка, яку ви встановлюєте на місці тримача інструменту о 14:03? Я вважаю дуже практичним робити фрезерування! Я відкрив ваш канал вчора, і у мене точно такий же трюк; Вражаюче, що ви робите з... Спасибі і новому абоненту! Привіт з Франції ...😉✌
It looks like a lot of time and too many holes in a line making the casting weak these are cheap lathes i have had one for over ten years the motor stopped working and the control box burned out it has a 3/4 hp motor on it now i also have a myford that i do nothing to it it cuts better looks better needs no time only a bit of cleaning and will still be turning when i am not the mini lathe is good at getting people into turning
I guess if ml7 are plentiful and cheap where you're at🤷♂️ where I'm at, there have been two in the past 7 years show up on the market within a reasonable distance and both were asking over 6k usd for a well used machine with minimal tooling included. Yes these little lathes take time to get set up but so does a clapped out old ml7. With a mini, I can get the results I need for a tenth of the price. For the money, you cannot beat the mini lathe.
I'm learning so much from you! You do things beyond what I even imagine, and best part, you do it on a mini-lathe. It's like learning from an expert, but specifically for my limited lathe, or as you have demonstrated, fully capable lathe.
Nice design and upgrade, love it. If anyone from a factory in China is watching, I won't be surprised to see this design in small lathes in the future 🤣
Won't see it from mainland China. It costs money.
@@aceroadholder2185 And it needs quite fine tolerances to work properly. Not something they´d like to make on a machine that is for people who are often just buying their first machine tool and don´t know the importance of it.
You don't understand China at all.
Super awesome...BRAVO!! I don't know if I will be able to do this on my lathe as well... it's very beautiful precision work...!!
Super génial...BRAVO !! je ne sais pas si je serai capable de faire aussi cela sur mon tour... c'est du très beau travail de précision...!!
A very satisfying and helpful video. While watching your video, I was forced to open a beer and sit comfortably in a chair and relax. Thank you. This is what I needed. Greetings from Poland.
Very clever design! 👍🙂
Off the scales genius design and workmanship.
Very nice modification. I wish I was talented enough to do that because it’s really needed. 👍🏻
Nice use of what appear to be diesel fuel injector pins as transfer punches. I have a number of them around the workshop, you need to anneal the striking end to prevent them sending out splinters.
Very nice my friend this is a great idea and really good video 👍🏽
Nice work mate, this much better than dealing with the 2 annoying tightening bolts
Thank you for sharing, excellent work, design, video and execution. I will intent to duplicate your work, we shall see LoL. All the best from Uruguay.
As always, Beautiful.
Prossima modifica potresti creare un meccanismo a vite senza fine per regolare l angolo di inclinazione, al posti di muovere manualmemte la torretta .volevo chiederti una cosa : ,ho un tornio vevor , e i taglienti sono piu alti del centro di 1 millimetro e anche più, con i pezzi piccoli è un problema, sai come risolverla ?.
Se arano più bassi bastavano spessori ma così? Che faccio? Rettifico tutte le aste dei taglienti o modifico la torretta ?
FIRST, FIRST, CONGRATULATIONS ON THE TOP PROJECT. TELL ME SOMETHING, WHICH WHITE MATERIAL IS THIS THAT YOU USED TO INSULATE THE PIECE TO HEAT IT AND PUT IT IN THE OIL? WHAT'S HIS NAME ? I REALIZED THAT EVEN AT ALMOST 1000 °C IT DOES NOT BURN.
Ceramic Fiber Wool LYTX-312
Very well done. 👍👍👍👍👍
Very nice, would this be strong enough for a bigger lathe?
I think yes
I have my doubts
@@cda32 for small bench lathes I think it would be rigid enough - it is as rigid or more than your average morse taper tooling in milling machines. You cannot compare it to a big engine lathe or solid tool post mounts.
Sehr gut Arbeit 👍👍👍
Bellissimo lavoro, sarò costretto a copiarlo, vedo che funziona molto bene! Un saluto da Roma e complimenti! 👋👌
Did your lathe come polished or is that something that you did? Mine showed up looking like a piece of crap from the scrap metal pile
The lathe came to me in this condition
Très belle réalisation ! J'ai acheté un tour chinois chez VEVOR et je suis très déçus car même après les réglage des jeux, ca coince du coté de la poupée fixe et du coté de la poupée mobile il y a beaucoup de jeu. Après avoir vérifier le banc avec une règle je me suis rendu compte qu'il n'était pas rectiligne (Défaut d'usinage ou de moulage) .
Vevor selling junk. It seems they put the lathes together from defective cheapest parts including the most important - lathe bed.
Nice stuff as usual, thanks for sharing
Cheers
Conteúdo top demais
Saudações do Brasil !!🤝
Top Job,Sir 👌
¿Que material es el blanco para contener el calor cuando de calienta?
Lana de Fibra Cerámica LYTX-312
This is REALLY amazing!
what material do you used?
Super Idee und gut umgesetzt … hat Du davon eine bemaßte Zeichnung gemacht, und würdest Du sie teilen 🫣😉👍🏻
Není co dodat 👍👍👍 skvělé👍
Thanks!
Have you got up to date links for that angle adjustable cross slide
Beautiful work!
what material that is, so it can be hardend?
Is this a NUMOBAMS lathe?
Fantastic!
Thanks!
With all of your resourcefulness with that tiny lathe, why haven't you made a mini mill?
Good and neat work.
Melhor do que isso só dois ✌ disso valeu muito obrigado!❤
Sorry but i try in German.
Wenn Sie den Drehpunktdiameter reduzieren, erhöhen Sie die Instabilität .
Sie hätte besser den kompletten Konus umgearbeitet, oder den Quersupport verbreitert.
Auch die Stapelung in der Z-Achse sehe ich problematisch.
Dennoch viel Erfolg .
Greetings from Berlin/ Germany
The tool holder has a 10mm stud...
If you have a round Cylinder, then diameter reduce.
Thank it was instable Cylinder.
The Support must bigger ?.
Sorry for my fucking english, round about 40j. Old
Beautiful.
Один винт М4 стягивает и удерживает от проворота резцедержатель при силовом точении ? Слабо верится. Иногда на двух штатных болтах прямого зажима может провернуть. Нельзя положиться на данную конструкцию.
Für 2....3 mal Kegeldrehen ziemlich aufwendig. Aber schlanke Finger hast Du😊 spielst Du Klavier😊???
Grandios !!!
Thanks!
Привіт, як називається підтримка, яку ви встановлюєте на місці тримача інструменту о 14:03? Я вважаю дуже практичним робити фрезерування! Я відкрив ваш канал вчора, і у мене точно такий же трюк; Вражаюче, що ви робите з... Спасибі і новому абоненту! Привіт з Франції ...😉✌
Bonjour! C'est une sorte de fraiseuse, je ne sais pas comment ça s'appelle
@@hammerland4028 Я говорив про сталевий куб з Т-пазами, прикріпленими до тримача інструменту... дякую!
@@pierre-yveslucas5278 Ceci est une pièce d'un kit utilisé pour le fraisage (Google Translate)
@@hammerland4028 ок, велике спасибі і бережіть!
incredible again.
Bravo!
Slm kenal bg. Mantap mesin bubut nya. Harga berapa bg.
这是哪里
Hi.I did it 50 years before and other mechanics said that it will never be worked 😊😊😊😊😊😊
Genius.
Nicely made but overcomplicated for what it does.
Don't you need more gib screws. Maybe leave some for the rest of us... :D :D
Compound Slide.
Thanks!
🦾
top
Best upgrade to a Chinese lathe is to trade it in on a European one.
Mega rich, is it? 🙄
china makes lathes i can afford, europe doesn't, simple as
Would you rather have a person never enter this hobby due to cost, or develop skills by upgrading their equipment that will provide benefits later?
@@jamesmcbriarty2079 Definately prefer not supporting the Chinese in any way.👍
Das zu bauen ist nichts für Amateure mit nur einer Mini-Drehbank
It looks like a lot of time and too many holes in a line making the casting weak these are cheap lathes i have had one for over ten years the motor stopped working and the control box burned out it has a 3/4 hp motor on it now i also have a myford that i do nothing to it it cuts better looks better needs no time only a bit of cleaning and will still be turning when i am not the mini lathe is good at getting people into turning
I guess if ml7 are plentiful and cheap where you're at🤷♂️ where I'm at, there have been two in the past 7 years show up on the market within a reasonable distance and both were asking over 6k usd for a well used machine with minimal tooling included. Yes these little lathes take time to get set up but so does a clapped out old ml7. With a mini, I can get the results I need for a tenth of the price. For the money, you cannot beat the mini lathe.
I hate those loose 8 second shots that show nothing
Big thumb down
Genius level unlocked.
what a thrill, that's what I needed, thank you very much 🥹❤️
Awesome job, 👏👏👏 subscribed and like❤😉👍🇧🇷 @arduinomaquinas thanks you !