hello excellent video, you can help me with it I'm from Colombia greetings, I have a problem with the same E3 free runs card that same I buy for my ender 3 and I need to change the firmware and I have not podium, I already tried it with the micro SD and I don't know what else to do. I would appreciate you to help me with that issue.
I used the TH3D files ( www.th3dstudio.com/product/unified-2-firmware-for-creality-e3-free-runs-tmc2209-board/ and followed thier video ( ua-cam.com/video/xDc9FpenGUE/v-deo.html) and just got it to compile and working right. The TH3D files have many different printers in the config.h folder. So simply uncomment the define for your printer. But only uncomment one printer per firmware build. Do not download the files into a Dropbox/Onedrive etc. I created a folder in a external storage ( or create folder in C drive) Be sure that the SD card is formtted correctly. Fat32 4096. !!! README - FLASHING FIRMWARE SD CARD NOTE!!! The firmware BIN file MUST be placed in a folder on your SD called STM32F4_UPDATE AND a different name every time you flash. I renamed using date and time of flash Example: firmware10120240151 is today's date added to the end and then the time =0151 this way the name always changes and gives a reference for when the firmware was created. !!! BOARD JUMPER NOTE !!! There is a jumper on the board. It must be on the MS and GND pin. By default it is likely on the 3V3 and MS Pins. If you are getting TMC CONNECTION ERROR you need to check and move the jumper to the position that covers the MS and GND pins. Hope this helps. If you need more help let me know. Good luck.
hello excellent video, you can help me with it I'm from Colombia greetings, I have a problem with the same E3 free runs card that same I buy for my ender 3 and I need to change the firmware and I have not podium, I already tried it with the micro SD and I don't know what else to do. I would appreciate you to help me with that issue.
I used the TH3D files ( www.th3dstudio.com/product/unified-2-firmware-for-creality-e3-free-runs-tmc2209-board/ and followed thier video ( ua-cam.com/video/xDc9FpenGUE/v-deo.html) and just got it to compile and working right.
The TH3D files have many different printers in the config.h folder. So simply uncomment the define for your printer. But only uncomment one printer per firmware build.
Do not download the files into a Dropbox/Onedrive etc. I created a folder in a external storage ( or create folder in C drive)
Be sure that the SD card is formtted correctly. Fat32 4096.
!!! README - FLASHING FIRMWARE SD CARD NOTE!!!
The firmware BIN file MUST be placed in a folder on your SD called STM32F4_UPDATE AND a different name every time you flash. I renamed using date and time of flash Example: firmware10120240151 is today's date added to the end and then the time =0151 this way the name always changes and gives a reference for when the firmware was created.
!!! BOARD JUMPER NOTE !!!
There is a jumper on the board. It must be on the MS and GND pin. By default it is likely on the 3V3 and MS Pins.
If you are getting TMC CONNECTION ERROR you need to check and move the jumper to the position that covers the MS and GND pins.
Hope this helps. If you need more help let me know. Good luck.
@@Digitallifeconcepts tengo un problema ellos no tienen soporto o venta para colombia me puedes vender el codigo de visual studio porfavor ?
@@impresoscnc4968 visualstudio.microsoft.com/downloads/
@@Digitallifeconcepts ya logre comprar el codigo