2004-2009 Toyota Prius Engine Rebuild 4 | Timing and Start up

This 2008 Toyota Prius is getting the engine rebuilt in vehicle.
🛒PARTS LIST:
▪️ Timing Kit: amzn.to/3QpdJ3p
▪️ Head gasket kit: amzn.to/3QjTQLa
▪️ Lower gasket kit: amzn.to/4dgvw6B
▪️ Pistons: amzn.to/3UvHdix
▪️ Piston rings: amzn.to/3wdQdj1
▪️ Connecting rod bearings: amzn.to/3xTxUAd
▪️ Main bearings: Recommend dealer
▪️ Water pump: amzn.to/44jHV5L
▪️ Thermostat: amzn.to/3w8B7ve
▪️ Radiator hose upper: amzn.to/3Wgrbdx
▪️ Radiator hose lower: amzn.to/3JDAz3I
▪️ Knock sensor: amzn.to/3WzzsK7
▪️ VVT Solenoid: amzn.to/3JCq28Q
▪️ Anti- sieze: amzn.to/42wZ2QS
▪️ Assembly lube: amzn.to/3ua1pMD
▪️ Dielectric grease: amzn.to/3HDPTMw
▪️ Ultra grey RTV (optional): amzn.to/3OuOjQV
▪️ Thread locker: amzn.to/491k78u
🛒TOOLS NEEDED:
▪️ Allen socket set: amzn.to/3ksxOWY
▪️ Breaker bar: amzn.to/42eP7Pq
▪️ Coolant funnel:amzn.to/4bfMaCk
▪️ Electric ratchet: amzn.to/3Sw4W12
▪️ Flashlight: amzn.to/48OaGJi
▪️ Flex head ratchet: amzn.to/47PZwm7
▪️ Impact driver: amzn.to/3FhU5kR
▪️ Impact socket set: amzn.to/3Hy3fKi
▪️ Impact wrench: amzn.to/3Sfmiht
▪️ Long plyer set: amzn.to/3u9Qkv2
▪️ Pick set: amzn.to/3u9AdNZ
▪️ Piston ring compressor: amzn.to/3Sbfq4G
▪️ Plastic scraper: amzn.to/4bh3oPI
▪️ Plier set: amzn.to/3uhTvRi
▪️ Prybar set: amzn.to/3IkSlWw
▪️ Socket and wrench set: amzn.to/4b6K8ob
▪️ Torque wrench 1/2: amzn.to/3AgaOB2
▪️ Torque wrench 1/4: amzn.to/493Xr70
▪️ Torx bit set: amzn.to/4b5WUTQ
▪️ Wrist pin puller: amzn.to/3Qzsxwz
😎If this video has been helpful consider supporting us with a cup of coffee! 🙂
www.buymeacoffee.com/ValleyMo...
➡️I am part of the Amazon affiliate program and get a small commission when purchases are made through the links provided.
🔺DISCLAIMER
The information provided by Valley Mobile Automotive (“we,” “us” or “our”) on this video is for general informational purposes and entertainment only and does not replace professional advice.
All information is provided in good faith; however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on the video.
By working on your own vehicle, you take responsibility for the outcome.
Under no circumstance shall we have any liability to you for any loss or damage of any kind incurred as a result of the use or reliance on any information provided on this channel. Your reliance on any information on the videos on this channel is solely at your own risk.

[@krabbypatty3644]

you da man

[@MrCharlievan]

Good job!

[@ValleyMobileAutomotive]

Thanks! This was a fun rebuild project 🙂

[@alexhuggins5924]

Can you please follow up with what the MPG is after the rebuild. What was it pre rebuild? What was the cost of parts? Machine work?

[@ValleyMobileAutomotive]

Thanks for your questions. The MPGs before rebuilding weren't terrible. Around 40ish. It was consuming a good amount of oil. Parts and machining at the time of filming totaled around $1,200.