Thank you for watching! 🙂 If you're interested in any of the parts seen on my bike, click the link and support the channel. www.motovationusa.com/?ldid=clutch1st
@@ClutchFirst what's the name of the song used in this video ? I'm a ghost writer . I can get you and your bike featured in a legit music video with a well known artist .
@@ClutchFirst 166 / 5000 Résultats de traduction Hello please in your video at 2 min the 2 screws have a hole in the middle because on my bike there is a hole and it is full of rust. thank you in advance for your response
I don't even own a duc and I was still intrigued! excellent editing and informative! Lets get you to that 50k sub mark before the start of summer lol !!
Fro Rider It’s a long road to 50K Sub. Definitely attainable with some consistency and quality work. 🙂 Good looks for coming through and supporting the channel. 🙏🏽
I am lovin' the shirt! Especially since it has our flag on the sleeve! You know me, rep what I do and what I love. "It's all GRAVY, in tha NAVY!" Old school saying...my bad!
I see this video is 4 hrs old. Do you still have your Monster 796 abs ? I just got one & don’t see good Videos ? I like your Videos, I have questions. I used to race in the 1970’s & 1980’s & have not had a bike nor ridden in a while. More Maintenance Vodeos please
I sure do. I've added several new motorcycles to my stable and stored the Monsters in my garage. There's a ton more new vids on the channel. Subscribe to help the channel grow. I do more maintenance work. three days ago I uploaded an hour long install on my Hyper SP.
Smoke 1 Yo, it’s the best way to save money on bike ownership. A little bit of research and wrench yourself. Always appreciate you watching and supporting the channel.
FYI, you can change your wheel base and ride height by a small amount depending on where you rotate that eccentric hub. If you're looking at the bike from the kickstand side, adjust the hub to 9 O'clock would shorten the wheel base. 3 O'clock would lengthen it. 12 would lower the bike slightly. 6 would raise it. This sort of thing is important to professional racers where every millimeter of geometry change affects handling.
MotoErgoSum Just one question. When and are you ever going to upload anymore vids? You’ve got a lot of detailed information that would be very useful to share. You couldn’t have said it any better and it’s always great to see you on the channel.
Life With Research You already know! I’m out here doing my homework like you big homie. We’ll be hitting some heavy night runs once the weather is right.
When your adjusting chain, you need to check that measurement of free play in multiple spots. It might not make sense however you’ll notice that it’s actually tighter and looser in some spots as you check slack at diff positions. Make sure your adjusting it based on those findings or replace chain
Omar Jurado Woelz Hey, welcome to the channel and glad you found the vid helpful. Personally I wouldn’t recommend using anything else from the specific Ducati tool. Ducati’s are temperamental and if something goes wrong, it will cost you a lot. Besides, that tool is not super expensive.
seth greathouse Yo, Spring can’t come soon enough. A and I will be heading back to Dinosaur bbq once spring comes around. We want to sit outside while we enjoy some delicious 😋 bbq.
McKersin Previlus It’s an EK 3D premium chain. You can grab one from motovationusa.com. Use coupon code ‘clutch1st’. Also let them know you’re coming from the channel.
Why don't you show the distance between chain and swingarm? I'm sure It became less then 61mm after your adjustment. When between 61 and 63 it really feels too loose, which is really confusing.
nice vid, i am still curious as to why in all the vids describing the adjusting process not one mention of the part # to this chain tool, nor a link on where to get one :/
![Very Easy and Simple Change and Inspect Spark Plugs [Ducati Monster]](http://i.ytimg.com/vi/is40ppfRk10/mqdefault.jpg)
Thank you for watching! 🙂 If you're interested in any of the parts seen on my bike, click the link and support the channel. www.motovationusa.com/?ldid=clutch1st
I ❤️ the 🎶🎼 and flow of this video! I salute you Sir!
650ib Thank you ib. Stepping it up a bit this year. Hopefully it’s my year to shine. 🙂
@@ClutchFirst indeed it is Sir!!!! ✔️❤️💪
@@ClutchFirst what's the name of the song used in this video ? I'm a ghost writer . I can get you and your bike featured in a legit music video with a well known artist .
@@ClutchFirst 166 / 5000
Résultats de traduction
Hello please in your video at 2 min the 2 screws have a hole in the middle because on my bike there is a hole and it is full of rust. thank you in advance for your response
The cans on that Monster look so good too!
Renegade The Competition Werkes Black Velvet finish is the business. Love the look and sound.
I don't even own a duc and I was still intrigued! excellent editing and informative! Lets get you to that 50k sub mark before the start of summer lol !!
Fro Rider It’s a long road to 50K Sub. Definitely attainable with some consistency and quality work. 🙂 Good looks for coming through and supporting the channel. 🙏🏽
@@ClutchFirst certainly a long road, but you've been on the grind thus far! 2019 I'm predicting a clutch1st takeover lol
Thanks!!...I just replaced the chain on my Monster, (single sided), and gave the info I needed!! Music is good, too!!
I’m glad you found the video helpful. Subscribe for more vids and help the channel grow. 🙂
Helpful video, answered all my questions. Thanks
I’m glad you found the video helpful. Subscribe for more.
I am lovin' the shirt! Especially since it has our flag on the sleeve! You know me, rep what I do and what I love. "It's all GRAVY, in tha NAVY!" Old school saying...my bad!
I see this video is 4 hrs old. Do you still have your Monster 796 abs ? I just got one & don’t see good Videos ? I like your Videos, I have questions. I used to race in the 1970’s & 1980’s & have not had a bike nor ridden in a while. More Maintenance Vodeos please
I sure do. I've added several new motorcycles to my stable and stored the Monsters in my garage. There's a ton more new vids on the channel. Subscribe to help the channel grow. I do more maintenance work. three days ago I uploaded an hour long install on my Hyper SP.
Hey Mike! Thanks for all the tip and advice. Can't wait to get home and put in some work. Great video!
Smoke 1 Yo, it’s the best way to save money on bike ownership. A little bit of research and wrench yourself. Always appreciate you watching and supporting the channel.
FYI, you can change your wheel base and ride height by a small amount depending on where you rotate that eccentric hub. If you're looking at the bike from the kickstand side, adjust the hub to 9 O'clock would shorten the wheel base. 3 O'clock would lengthen it. 12 would lower the bike slightly. 6 would raise it. This sort of thing is important to professional racers where every millimeter of geometry change affects handling.
MotoErgoSum Just one question. When and are you ever going to upload anymore vids? You’ve got a lot of detailed information that would be very useful to share. You couldn’t have said it any better and it’s always great to see you on the channel.
gracias man! lo hare en mi hyper 939 😛
Always so informative and precise even I can do it! 😉
LifewithAnnaBee That’s the idea. A little bit of research and reference vid and you’re good to go. 🙂
Fresh video as usual my man, and that shirt is dope
Rudy M 3 Sup Rudy, good to see you on the channel. 🙂
my dude coming with the butt loads of information, dope vid brotha. the season cant come soon enough. i want night rides llolol
Life With Research You already know! I’m out here doing my homework like you big homie. We’ll be hitting some heavy night runs once the weather is right.
Another great video 👍
Thank you! 🙂
Very informative video buddy. I cant wait to see you riding your new toy.
hawk362_Prince Glad you enjoyed the vid. Yeah man, I’m looking forward to Spring. 🙂
Very informative and very well explained 👍🏼 keep um coming 🏍👍🏼
SONAMOTO Thank you for watching and glad you found the video helpful. Don’t forget to Subscribe for more. 🙂
When your adjusting chain, you need to check that measurement of free play in multiple spots. It might not make sense however you’ll notice that it’s actually tighter and looser in some spots as you check slack at diff positions. Make sure your adjusting it based on those findings or replace chain
Hey, bro. Is that hook span adjuster special? or could i use the one I've got for adjusting my car's coilovers?
Omar Jurado Woelz Hey, welcome to the channel and glad you found the vid helpful. Personally I wouldn’t recommend using anything else from the specific Ducati tool. Ducati’s are temperamental and if something goes wrong, it will cost you a lot. Besides, that tool is not super expensive.
Thanks for sharing mike! Cmon spring!!!! Nice shirt man. Have you and Anna been back to dinosaur barbecue lately?
seth greathouse Yo, Spring can’t come soon enough. A and I will be heading back to Dinosaur bbq once spring comes around. We want to sit outside while we enjoy some delicious 😋 bbq.
Very detailed visual video 😎👍
Keith Wong Here’s to hoping this vid help someone else down the line. 🙂
Dope video man. Where'd you get your chain from. Love the gold accent on the black.
McKersin Previlus It’s an EK 3D premium chain. You can grab one from motovationusa.com. Use coupon code ‘clutch1st’. Also let them know you’re coming from the channel.
I am looking to the manual and cannot find the number :/
What is the stock Ring Gear number? I am looking to change it for a bigger one is it z39?
George Vizaniaris I believe the stock gearing is 14T in the front and 40T in the rear. I’ll check and confirm for you when I get a chance.
cool vid mike, very helpful :-)
Renegade Good looks man. 🙏🏽 I appreciate watching and being part of the channel. 🙂
@@ClutchFirst No worries bro, been a subscriber of yours for some time now - great vids!
What's the name of the song bro ?! Sick bike !
Great vid, bro.
RidingWithDemic Thanks man. 🙂
What's the name of the background music ?
I'd love a T-shirt man if you ship ww. 👌
Wim Van Holder I got you. DM me your info on IG.
Why don't you show the distance between chain and swingarm? I'm sure It became less then 61mm after your adjustment. When between 61 and 63 it really feels too loose, which is really confusing.
nice vid, i am still curious as to why in all the vids describing the adjusting process not one mention of the part # to this chain tool, nor a link on where to get one :/
Got mine on Ebay
You can check motovationusa for a Ducati chain spanner.
Sell those shirts so i can buy one and support!
Andrew Moore Merch coming soon! Thank you for the continued support.
So you dont need a bike stand ?
michael noname the stand is not a necessity. Thank you for checking out the vid and don’t forget to Subscribe.
Didnt explain how to properly tighten iaw the manual at all
Pretty loud background music
C Spanneer
23 foot pounds seem low to anyone else?