Thank you so much for doing these and with the reviews to I did get to machines myself I got the joy and then I got explorer Air 2. And I did see all the needle housings and then I know that there are the newer machines so I take that and consideration too I've yet to explore everything I can do with the machines but I appreciate you going through the needles because I couldn't cut iron on vinyl I needed the black deep cut and I did purchase the pink fabric because I already had the gold fine point. This is what I'm saying Thank you for your review on the engraving cuz I did see that silver engraving one and I did notice that pen engraver too and some pictures and then the copper bronze top with the changeable bottom tips I saw those which I know the current newest one does accept those I think there was some for the explorer Air 2 but that's yet the cone Thank you for reviewing those though for me I appreciate it
thanks for video. i am plan to buy machine only for cut acetate which machine should I purchase and which blade should I buy thanks for sharing your knowledge ❤
How come none of the videos will show me what I need to do to make my cricket explorer 3 cut deeper through stencil. I have the deep point blade which is the black ones and I had five different passes with more pressure added. Still didn't cut through! It looked like it was cutting through and it took forever which was great but it didn't cut all the way through so when you try to remove the stencil pieces it rips. Super frustrating
I just bought the gold housing blade and I use it only for fine cutting. The pink one is for paper and the silver one is for vinyl. I have a cricut debosser, engraver, rotary cutter, knife and deep cut blade as well as the foiler for my maker. I have at least 2 mats of every stickiness. I keep my blades in a housing similar to yours but mine is rectangular. I keep my extra blades in the drawer of my machine along with the scoring stylus. I love my maker. I will never ever buy another explore.
Thank You :) Great video ... Awesome details :) I do have a question though, regarding the cricut explorer 2 blades .... My E2 came with a 'Fine Point' blade and a housing (for it) .... my question > .... Can I put the 'Deep Point' blade into the Fine Point housing? or ... Do I have to purchase a new housing, that is only suitable for the Deep Point blade ....? :) Thank You :)
Hi, I'm wondering to buy a new knife blade. Is it possible if I use the same housing from the fine-point blade? If so, it would be better for me. Thank you in advance
Any idea if cricut will ever let us edit kmife blade settings or even make our own custom materials settings with it? I'm trying to cut both basswood and chipboard on my maker 3 and n ok ne of the preset materials are giving me the results I need.
Hi I have a cricut maker which I use quite frequently. However my machine has never been able to detect the rotary tool. Not sure why. Have you ever experienced this?
My guess would be that you don't have the rotary tool at all but rather one of the scoring wheels. However if you don't think this is the case, I would contact Cricut.
I have the original Cricut Maker, I have to change my blade after every thing I cut, my friends say this is not normal. If I cut a quote on a 6” piece of vinyl or cardstock, I have to change the blade before I cut anything else or it absolutely won’t cut, I go thru 5-6 blades just doing one project and it gets expensive, any thoughts on why this is?
That is not right. Are you sure it is the blade? A common mistake is changing the blade when it is other factors. First, clean your blade with aluminum foil to make sure it is not dirty. Second, it is more likely your mat that is the issue. You material needs to be down really well for a cut. Then check your settings. Make sure you are changing those for the type of material you are using.
@@AngieHolden thank you for this information. I have another question for you. What is the difference between the engraving tip and the debose tip? I'm wanting to engrave a message on my image and want it imprinted so that I can then go over it with “Brass Black”.
Thank you!
Thanks for your nice review
Thanks for the breakdown
No problem 👍
Thank you so much for doing these and with the reviews to I did get to machines myself I got the joy and then I got explorer Air 2. And I did see all the needle housings and then I know that there are the newer machines so I take that and consideration too I've yet to explore everything I can do with the machines but I appreciate you going through the needles because I couldn't cut iron on vinyl I needed the black deep cut and I did purchase the pink fabric because I already had the gold fine point. This is what I'm saying Thank you for your review on the engraving cuz I did see that silver engraving one and I did notice that pen engraver too and some pictures and then the copper bronze top with the changeable bottom tips I saw those which I know the current newest one does accept those I think there was some for the explorer Air 2 but that's yet the cone Thank you for reviewing those though for me I appreciate it
Happy to help!
Thank you 👍🏻
Thank you for this video!! Very helpful!
Glad it was helpful!
Very informative thank you!
Glad it was helpful!
Thanks for doing this very helpful Angie! Hugs Liz 😊
Glad it was helpful!
Thanks so helpful ❣️
Thank you po😊🙏
thanks for video. i am plan to buy machine only for cut acetate which machine should I purchase and which blade should I buy thanks for sharing your knowledge ❤
Acetate will cut with any of the machines and works with the fine point blade that will come with the machine.
Yes. How often do you think you need to replace the blade?
Actually not very often. It depends on a lot of factors but the problem is usually your mat not being sticky or the wrong cut setting not your blade.
I bought a bonded fabric housing for paper only (pink for paper) while my fine point is for vinyl only.
Great idea!
Do the tools shown for the Maker work in the regular Maker, I don't have the Maker 3
Yes they do.
How come none of the videos will show me what I need to do to make my cricket explorer 3 cut deeper through stencil. I have the deep point blade which is the black ones and I had five different passes with more pressure added. Still didn't cut through! It looked like it was cutting through and it took forever which was great but it didn't cut all the way through so when you try to remove the stencil pieces it rips. Super frustrating
Sounds like your stencil material is thicker than usual. Try this: ua-cam.com/video/VIq9oWM7oS0/v-deo.html
Hello, I wanna cut airfreshener paper. Which blade would you recommend
? I have cricut explore 3. Thank you
Sorry not sure! i haven't cut that.
I just bought the gold housing blade and I use it only for fine cutting. The pink one is for paper and the silver one is for vinyl.
I have a cricut debosser, engraver, rotary cutter, knife and deep cut blade as well as the foiler for my maker. I have at least 2 mats of every stickiness. I keep my blades in a housing similar to yours but mine is rectangular. I keep my extra blades in the drawer of my machine along with the scoring stylus. I love my maker. I will never ever buy another explore.
hello, i have a question. can i use the knife blade on explore air 2 for magnetic sheets? thank you.
The knife blade does not work on the explore air 2. The deep point blade cuts magnetic sheets though.
How do I use the score pen with the venture? It’s so small and won’t fit in a or b but it’s to big for any housing
It will go in the pen housing side.
Could you use the ones with wheels on top with the older models of makers? I have the original one.
You can use those on the Maker and Maker 3.
Thank You :) Great video ... Awesome details :)
I do have a question though, regarding the cricut explorer 2 blades ....
My E2 came with a 'Fine Point' blade and a housing (for it) .... my question > .... Can I put the 'Deep Point' blade into the Fine Point housing?
or ...
Do I have to purchase a new housing, that is only suitable for the Deep Point blade ....?
:) Thank You :)
I would do a new housing for the deep point.
Hi, I'm wondering to buy a new knife blade. Is it possible if I use the same housing from the fine-point blade? If so, it would be better for me. Thank you in advance
The knife blade does not fit in the same housing as the fine point blade.
Hi! What do you recommend for a maker machine to put a design on faux leather???
To cut a design, the fine point blade will work fine.
Hi. How do I turn off he products ad that is blocking 1/3 of your video screen. Thabks
There is usually an X in the corner or the word "close" that you can click at any time!
Any idea if cricut will ever let us edit kmife blade settings or even make our own custom materials settings with it? I'm trying to cut both basswood and chipboard on my maker 3 and n ok ne of the preset materials are giving me the results I need.
They will not because it risks damage to the machine. You can cut all the way through your mat and into the machine itself.
Hello. Can the deep cut blade cut wood?
It can cut wood veneer (which is paper thin sheets of wood) but not anything thicker. The knife blade and the Maker is what cuts thicker wood pieces.
Hi I have a cricut maker which I use quite frequently. However my machine has never been able to detect the rotary tool. Not sure why. Have you ever experienced this?
My guess would be that you don't have the rotary tool at all but rather one of the scoring wheels. However if you don't think this is the case, I would contact Cricut.
This just happened to me and it’s not available in any stores. I’ll have to order one online
I have the original Cricut Maker, I have to change my blade after every thing I cut, my friends say this is not normal. If I cut a quote on a 6” piece of vinyl or cardstock, I have to change the blade before I cut anything else or it absolutely won’t cut, I go thru 5-6 blades just doing one project and it gets expensive, any thoughts on why this is?
Are you using the original Cricut blade?
@@monaelmeligy2919 Yes, I always use Cricut brand which is what makes it become so expensive
That is not right. Are you sure it is the blade? A common mistake is changing the blade when it is other factors. First, clean your blade with aluminum foil to make sure it is not dirty. Second, it is more likely your mat that is the issue. You material needs to be down really well for a cut. Then check your settings. Make sure you are changing those for the type of material you are using.
I purchased my maker from cricut and did not get a rotary blade
Maker comes with a rotary blade but Maker 3 does not.
@@AngieHolden thank you
the blades are so many lol but that is good so you can do more
What blade do you recommend for my maker 3 to cut on circuit metal?
Cricut metal is only for engraving and not cutting. You can use engrave tip to engrave it but you can't cut it.
@@AngieHolden thank you for this information. I have another question for you. What is the difference between the engraving tip and the debose tip? I'm wanting to engrave a message on my image and want it imprinted so that I can then go over it with “Brass Black”.
You are such a great teacher👏👍👍.
This is a great video thank you!
Thanks for watching!