2016 Ford GT350R SpeedKore Carbon Spec - Jay Leno's Garage
Вставка
- Опубліковано 16 лип 2017
- David Salvaggio, Vice President of Speedkore, stops by the garage to show Jay their all carbon fiber bodied Ford 350R.
» Subscribe: bit.ly/JLGSubscribe
» Visit the Official Site: bit.ly/JLGOfficialSite
THE BEST OF JAY LENO'S GARAGE
» Exclusive First Looks: bit.ly/JLGExclusives
» Ultra Rare Supercars: bit.ly/JLGSupercars
» Jay's Book Club: bit.ly/JLGBookClub
JAY LENO'S GARAGE ON SOCIAL
Facebook: / jaylenosgarage
Twitter: / lenosgarage
Instagram: / jaylenosgarage
ABOUT JAY LENO'S GARAGE
A new video every Sunday! Visit Jay Leno's Garage, the Emmy-winning series where Jay Leno gives car reviews, motorcycle reviews, compares cars, and shares his passion and expertise on anything that rolls, explodes, and makes noise. Classic cars, restomods, super cars like the McLaren P1, sports cars like Porsche 918 Spyder and Camaro Z28, cafe racers, vintage cars, and much, much more.
NBC ON SOCIAL:
Full Episodes: NBC.com/video/library/full-epi...
NBC UA-cam: / nbc
Follow NBC: / nbc
Like NBC: / nbc
NBC Tumblr: / nbctv
NBC Pinterest: / nbctv
NBC Google+: plus.google.com/+NBC
NBC Instagram: / nbc
2016 Ford GT350R SpeedKore Carbon Spec - Jay Leno's Garage
• 2016 Ford GT350R Speed...
Jay Leno's Garage
/ jaylenosgarage - Авто та транспорт
After seeing what Ford Performance did with this car...I had to have one. So I bought one and I’m loving every minute of it. Im not a ford or a Chevy guy, I’m really more of a Porsche guy. This car represents a milestone in American sports car manufacturing. I’m not sure I have the cash for a complete carbon conversion, but I know it would make it even better. The car is special...it’s a gem.
One of the few cars you can hear off in the distance and instantly know what it is. Such a beauty.
The GT350 is the only Mustang with the flat plane crank, correct?
For the guy's who know, how's the reliability of the flat plane crank?
They sure sound sweet AF.
@@slickrock1371 Seeing that the engine is special, a lot of people have problems with blown engines, likely because they don't pay attention to oil temp or oil pressure. If you take good car of the engine, you'll be just fine.
There's a guy that lives near me with a GT350R, and it is BY FAR the best sounding Mustang I've ever heard in person.
I mean I've always loved the sounds of a Terminator Cobra, but man. This thing. Amazing.
AceDeuce221981 i drive a 1990 camaro v6 and it looks badass one day this stang was at a light next to me and i already know im not winning any races so i just went normally but he floored it and took off and that stang sounded soooo deep and lumpy and great
that flat plane crank tip
AceDeuce221981 they sound beautiful man!
Rbreeze 78 V6 AND 4 CYLINDER "MUSCLE CARS" MUST DIE!!!!!!!!!
KILL THEM WITH FIRE!!!!!!!!!
Mich Tibaldo ey i dont want that 3.1L in there either lmao
Jay just purchased some carbon fiber jeans, shirts and under garments... He is going out dancing this weekend..!!
I imagine they'd be pretty itchy...
Naa he bought them to makeup for the exhaust on his Ford gt
👨⚕️
They are smooth from the coating.. they just don't bend in the joints..YIKES
Literally loll'd in the office. Amazing, love it!
"Why aren't the original manufacturers doing this?
Because they would have a hard time selling a 200k mustang
West Senkovec a 1000hp twin turbo coyote/voodoo with a dual clutch in a 3000lb car would sell for 200k.
Il Valentino hence the need for Carbon
West Senkovec They had no problem selling $400K+ GTs, just because it's a Ford doesn't automatically make it low class.
yeah it would sell...to 20-40 people.
AlexCoronaPhoto you Can't compare the 2. The GT has always been a Ferrari beating race car. The mustang was an every man's fast car.
one is expected to be expensive and the other expected to be cheap.
Opposites in many senses made under the same badge.
would love to see a track comparison wit this and the regular gt350r
Yeah, it would be pretty awesome. Weight is definitely the enemy of performance. My question is if Ford can make an aluminum F150 why wont they make an aluminum Mustang?
Jeff K Probably because the next GT will be made with both Carbon fiber parts and an aluminum chassis. Development costs will not be cheap and be in the billions because the assembly line will require a complete overhaul to accommodate it. Mass production aluminum welding is just beginning and Ford is a leader in this area in the U.S. Europeans have been doing it for 15+ years.
It's expensive!
I guess the onus is on every car company to make something faster than what has come before it, horsepower without any hybrid technology has hit the roof of what it is capable of for production cars at the moment before F1 ignition technology trickles down, only way were going to see a faster next gen Mustang is through weight reduction as you said
Lower on the totem pole for fleet CAFE standards, would be my guess. F150 is their workhorse. So you update the techniques on one line, and seeing how repair, paint, and performance issues turn out over a few years, then you take it to other models.
C Brooks Under the current President, CAFE standards are sadly, to be removed.
Ford is not building Aluminum chassis yet, only truck body parts. But you are correct, they will learn best in class manufacturing techniques.
Carbon fiber is the future for monocoque bodies if weight reduction is the goal.
Large cargo trailer chassis made from carbon fiber with full structural engineering is likely, reducing its weight by half.
It's literally a "carbon copy".
that's funny, but what's even funnier is most of the people reading it wont' know wtf you're talking about lol....
Iif my uncle drives it, it's a blind carbon copy.
Wow lol just got that joke lol
Dude 😆😆🤣
this david guy is a master of redirection
I'm more of a chevy guy, but as soon as I see a Shelby, there's just something about it that I love.
Hi, Mr. Shelby the Icon("Ford H.Q. Should have his Statue out Front because he has kept them Paid!"), worked with a Lot of car companies(Corvette-before he was ousted due to Duntov/Aston Martin-Driver/Toyota/Chrysler etc. Thanks-Smith' Hot Wheels guy' Die cast Bham Al.
Jay: "How much weight you have saved on the Mustang with this?"
Guy: "We have saved 650 pounds on Hellcat!"
He is true businessman or politicaian this guy... :-)
Icruz210 More like Hillary, Trump says it how it is
Hillary couldn't remember.
servicarrider True, she probably had a seizure
not really
Spazik86 You can pretty much guesstimate based on the weight difference between the normal 350R and a Hellcat using percentages.
WOW. That is one of the most badass cars I've EVER seen.
Jay's lead shoe added back the weight that the carbon fiber saved.
😀👍
I'm a simple man, I see a Shelby GT350R and I hit like.
What an original comment!
I'm a simple man too. I see a domestic car and I hit dislike!
theconman1395 What an original passive aggressive reply.
I'm a simple man, I see unoriginal comments I swat the person
I’m a simple man, I see a crowd killer and I run
The sound of the GT350R is awesome!
I removed 150 lbs from my mustang..I got divorced and that's what my ex wife weighed
furself1 looool better choose a lighter one next time 😉
At 150 you should be glad she's your ex
unless she was 6'2".......which would be even more frightening....or fun? lol
You missed the 4 and typed a 1 by mistake
Cucks Begone seriously?
The GT350R is a great car, adding carbon fiber makes it really cool. The carbon fiber process used by SpeedKore was very well explained!
Wow, what a beautiful car! As if the GT350R couldn't any better
Holy Fender/hood gap batman.
Exactly!! For my 70 grand, that gap and probably other fitment issues would have to be worked out before I gave it my approval. Did you notice they didn't get up close and personal with the trunk to fender or door to fenders gaps? Just mentioned the carbon fiber is aligned between panels. Hideous job if you ask me....Give me perfection or put the steel back on.
Zip~
Preston Watts LOL. Funny. So tighten the gaps and eliminate body flex and twist the chassis will exert, is what you want....
okey dokey...
Preston Watts look at the drivers door at around 16:49 too.... looks low to me. Don't get me wrong, love the car.... just seems like they could have tightened it up a little before doing JLG.
So I wasn't the only one that noticed that eh?
to have a weekend touring Jay's garage would be the coolest thing ever!
i swear... watching jay's show always leaves me stunned at the detail, professionalism, ingenuity and just the engineering technology of our current generation. especially because jay always shares how it was back in the day. very intriguing for me.
Boy that exhaust sounds like nothing else.. Marvelous
"The Colonel Knows Best" Lol.
Lmao he is so carefree. Swinging that fender around right next to the car
This is one awesome video!!!! Absolutely love the Shelby GT350s both versions!!!! Plus to see all that weight shaving carbon fiber one one is mind blowing!!!
Wow, to have an unlimited cash flow has to be awesome! Love the car!
I'm surprised that the company went though all the effort to recreate it in carbon and didn't take the the time to weigh it before and after and quantify their success considering that losing weight was the goal of these modifications at extreme cost....
I'm sure they did. It probably wasn't as impressive as they thought it would be.
7:47 "Wow, that's amazing" - me while watching any Jay's video ever, the guy knows sooo much
A masterpiece from Ford ! Really they have all my attention now with this amazing car and i live in Europe.
WOW... light weight rocket with a flat plane crank shaft motor..!!
absolutely flawless a dream of mine is to have one like that or to even drive that car
Absolutely love the Shelby GT350. The carbon fiber body is icing on the cake!
This guy knows his stuff , business . Very relaxed person also .!! Stang looks great .
what a badass car !
And very strong . CF is dog gone good stuff .!! That's why everyone with the need use's it .!!
And very strong . CF is dog gone good stuff .!! That's why everyone with the need use's it .!!
Car manufactures need to rethink everything. Jay listens to AM.
A prefect start to this Monday.
I like the way he videos his cars.Good
visuals while driving.The garage is immaculate.I like the way he did the posters and the floor.The cars are per
fect.Really good footage on the cars
running outside.👍🏁
I didn't think there was a way to make me like the GT350 more...
Did they think about maybe Jay usually drives his 350 by himself??? You added back at least 175 lb with the other guy in the front seat🙄🤓
dude was a midget, try 150
John Possum he was more like a Hobbit
150 in the rain.
150 wet wearing boots!
gorgeous looking car. huge fan of the carbon fiber look!
What a sound...!! Beautiful car..
Ah Jay, I love watching your video. I have a question ? Is the automotive advertising on the walls of the big dog garage original ? Are they reproductions ? Would a video on how you acquired them and what are you favorites, pique your interest in doing and presenting to your fans ?
Vincent Basso you should have the top comment,
That's an excellent observation. I'd like to see that too
Vincent Basso he's explained them, their all reproduction with him in the cars.
hilarious how he's talking panel gap and they show the top fender to hood gap...YIKES
What a beautiful sounding car.
To quote Jay, "Well done!" TY Jay for sharing.
RDB can do it too for 70k
0:49 I can fit an elephant in this gab
Yeah. I noticed that gap too. They messed up with that one.
I was thinking the same thing! That must whistle at high speed
And I imagine they realized that when filming and I figure they picked the best angle to film. The other side must be the same. Check out @ 14:44.
Looks like a standard Mustang panel gap.
The gap is for quick tune ups, just slide your head and arms in and do your adjustments. Easy.
Man that's so nice. Love the GT350R!!!
its freaking BEAUTIFUL
"Like a piece of typewriter paper"
What. What's a typewriter. Erm, actually, what's paper?
Paper is an object made from plants that are brutally murdered
chinese tablet screens.
Royhan,...Or, sometimes recycled into paper after they have fallen, instead of being allowed to return to the Earth naturally.
Of course, there are lots of arguments to be had against that as well.
I would love to see them do a 65 Mustang.
xRomeo999 or a 69
xRomeo999 just look up ring brothers carbon fiber mustang I believe its a 65
Good video as always!! Whichever model of the Mustung has gone in the automotive history, but I have to say that this car has been enhanced very well !! the chose of the carbon fiber has been much better and looks better,I've to say that I'm utterly staggered of the sound that makes, is a truly Masterpiece!!
Pretty sure this is my favorite JLG episode.
Ford should make a GT350 RS and have it all CF like this.
who tf dislikes anything with a 350r and then it's a full carbon r ,camaro owners go to sleep 😡😡
Maybe the people getting hit on the sidewalks :)). 350R fan here :)
ZL1 1LE Laugh's at anything the Mustang can do
Cars can't laugh. And props to Chevy for putting out great performance cars. Competition benefits all. Let's see what the tack of the GT500 is. If it's a super charged voodoo or 5.0 slapped in a gt350, Chevy might move to 2nd.
Not everybody likes crowd killers
LBigJake14 well they loose in sales and even with beating them in numbers every person still picks the shelby haven't seen it loose a comparison.
Love this car and this series.
Thanks Jay for making Mondays a day to look forward. Every week I am counting down the days to Monday and the release of the new episode. Like if it something that you look forward to every week also.
The panel gaps seem to be off to me. Like they are bigger than the factory gaps. Also I'd like to see the crash rating for this car compared to the factory metal.
They always say stronger than steel, but somewhere in this video I heard the guy say depending on the shape.
That Speedkore logo is very reminiscent of the Afrikaner Weerstandsbeweging logo.
True that. Not a very fortunate choice.
VolV8 this made me laugh. Good catch.
FISHY
"Don't touch me on my studio!"
Just heard my first GT350 roar past my local Cumberland farms here in Thomaston CT this last week, amazing and very very cool sounding car.
I love the SpeedKore stuff.
So how many speeding tickets have you actually paid ?? =))
0:49 rebuild title or eBay 🤔🤔 lol
Jay has the best hobby in the world!!! 🙂🙂♥️
Love this car!
3am upload? This really is the late night show ;)
Kryptonlte it’s 5 am for me
They need to do this on a Tesla P100D
Glenn Watkins 100% agree. But for that matter I think all electric cars should be using carbon fiber as standard practice. Give it another ten years and carbon fiber will be nothing special in automotive use as the price and process becomes cheaper to do.
Glenn Watkins there’s a company already doing that
Teslas are almost all aluminum already so not really as worthwhile like on this dinosaur car.
Commercial planes are typically aluminum. The 787 Dreamliner has some very significant weight savings through incorporation of carbon fiber. The tensile strength-weight ratio of carbon is simply incredible.
amazing work and detail
If nothing else the look is amazing!
Love to be able to remove 500 lbs off my 2012 Shelby GT500. 🙁
Icruz210. Ahhh shut up. LoL.. But ya..... Lmao.
Remove the engine.
Then add Vtec.
Stock Steel 2016 350R 3800lb as tested by Car and Driver. So this is said to weigh 3400 to 3200 lbs
Bruh there will be rotary lambo why not lawnmower crowd control.
"We have a group of artisans...that's part of our secret" Sorry to say but you should use those same artisans to solve that panel gaps issue....
Like he said earlier, they can do that but customer wanted it "COMPLETELY" stock.
BLOODY BRILLIANT...!!!
so many different carbon fibers now being used in so many different things I'm enjoying the uses there coming up with now.
*Yea, like Boeing commercial Airliners*
"Plasma TV's"? Dude, they haven't made those new in like 10 years.
Two years...but who's counting
So THAT'S why the plasma TV I just bought was marked down so much . . . crap.
He's probably uses that line every time when he talks about the car.
Hold on guys!! I bought a Mitsubishi 65 inch rear projector tv at the time the plasma TV's were just coming out and gave 3500$ for it (many years ago, lol) at the place I bought it they had the NEW plasma TV's for sale...a 32" if I remember correctly we almost 12 grand.. his point was that as things become more popular and economies of scale kick in prices come down dramatically. I still have a plasma and I will say the picture is still great!! Have a great night!!
Actually, the last plasma TVs were made by LG and ended in late (I believe) 2014.
MAKE AMERICA GREAT AGAIN!!!!
God Bless The Great White Hope
just awesome love this episode can't wait to invest in carbon fiber
Great footage inside and outside the
car.
1: it's ludicrous that this guy doesn't know how much weight they saved on this car.
2: Jay didn't mention acoustics
3: metal threads are called wires
Why didn't you take it to a truck scale. For $20 they will weigh your car.
I LOVE that car.
Nice having a guy who really knows about their product they are showing off.
Jay's got an iPhone... and an apple watch he can't download a am radio station app???
The beauty of Capitalism. Let's see a Communist or Socialist country come out with something as beautiful. Yugo anyone?
ccmyart Indeed, but also the by product of open markets and access to European machinery.
USA is becoming more fascist and socialist by the day.
@@exothermal.sprocket ^Unfortunate truth. Hoping it's just a stupid phase we will leave far, far behind us soon.
The Roman empire was a beastly one, but rotted themselves from the inside out. Where are they today?
Holy cow.Stronger than steel.
I love this. This is the type of company that revolutionizes the car industry. Just like CF wheels were ubber expensive 20 years ago and they're now in production cars, CF bodies will eventually be standard. And god that looks amazing!
up early J ?
coke
mustangs just don't look the same when they aren't crashing on you tube .
That's what happens when Chevy owners drive a Mustang. They're not used to all that power.
I have to say this is really cool!
I like that.One piece at a time.Good idea.
my god that hood fitment is terrible..... working with fiberglass and CF is so easy, no excuse for it
Agreed Kyong. For my 70 grand, the fitment had better be 100% on par. The hood is the main focal point and that bow at the top of the wheel well is hideous! Fail! And Jay didn't get as up close and personal with this car as he does every other one, which leaves me wondering what other fitment issues lie under the cloak, like trunk to rear fender, door to rear and front fender etc. As I said, for MY 70 grand, I expect 100% perfection, not just in the weave alignment, but the ever critical fitment. Just deplorable on the hood. Zip~
Kyong Hansen the hood was popped bro. lol
Kyong Hansen 😄. Why you so harsh bro. 😄
Kyong Hansen it's disgusting. I thought I was seeing wrong but I guess not. yuck! WTF
Kyong Hansen and for $70k it's fucking dumb. how much is the mustang, like $75k? I'd rather get an R8 or GTR.
But why is this thing sounds like a Trabant? :D
Well, it's already got the duroplast panels, might as well sound the part.
I will be purchasing some of these parts. Beautiful work/construction
Beautiful.
very nice video nice looking 350R.
Awesome looking Stang!!!!
thanks jay for dumbing it down for us. "it's like a kentucky fried chicken pressure cooker" extra crispy 😂😂
Could listen to that engine all day.
This is my new favorite car
likey ! i`ll take my morning cereals watching this.
That is one badass mustang.
My favorite modern car!!!!