“I like to detail the rear wheels first, and then the front wheels. The reason is because the rear wheel are generally dirtier.” I guess everything is different on the other side of the equator! I knew about the toilets flushing in the opposite direction, but in the northern hemisphere our front wheels usually get dirtiest. Great video, you have some valid techniques 👌🏻
I think he mis-spoke. He said he does there rear first because the rear wheels are generally dirtier because the front brake pads are bigger and do more work than the rear brakes and the water in the bucket doesn't get dirty straight away. I think he actually meant the front wheels are generally dirtier, which is correct, hence starting with the back wheels.
Two bucket is dead for sure. Only critique is drying with only water on the surface can still cause scratching since water is a solvent, you would’ve been better off using the bead maker as a drying aid and lubricant.
Extra safety never hurts. Your not getting everything off with bilt hamber and a pressure washer, so that 10 or 15 percent left of dirt could be reintroduced back on the paint with only 1 bucket.
@@whitegoodman7465 if you have a grid it falls to the bottom the same it would in another bucket, never washed a car myself and spread dirt around and I don't use bilt hamber I use other products, bilt is pretty good but it runs off too fast, maybe that's the problem
Its supposed to fall and stay beneath the grit guard but sometimes it doesnt and constantly dunking in 1 bucket WILL reintroduce more dirt back onto the panel vs 2 bucket. I put a p&s absolute in my rinse bucket for the dirt flocculation (drops the grit to the bottom). Everyone wants to find a different method to 2 bucket because if done properly its hard to beat and find negatives so they wanna be different. As for bilt hamber, it is runny compared to other high ph snow foams like koch chemie active foam but it depends on gpm on the pressure washer among other things. I'm lucky if i get 4 mins of dwell without risk of drying even out of the sun later in the day @@andyroosterag
“I like to detail the rear wheels first, and then the front wheels. The reason is because the rear wheel are generally dirtier.”
I guess everything is different on the other side of the equator! I knew about the toilets flushing in the opposite direction, but in the northern hemisphere our front wheels usually get dirtiest. Great video, you have some valid techniques 👌🏻
I think he mis-spoke. He said he does there rear first because the rear wheels are generally dirtier because the front brake pads are bigger and do more work than the rear brakes and the water in the bucket doesn't get dirty straight away. I think he actually meant the front wheels are generally dirtier, which is correct, hence starting with the back wheels.
I’m confused people talk about the 2 bucket method is good but I see in your video what amounts of time do you use in each vehicle 😊
Thanks for the upload, I use the exact washing method. Saves a heap of time and water.
Two bucket is dead for sure. Only critique is drying with only water on the surface can still cause scratching since water is a solvent, you would’ve been better off using the bead maker as a drying aid and lubricant.
You might as well use a brillo pad if you brush on snow foam as it will scratch to buggery
Using a small brush during prewash won’t cause debris to cause scratches on the car?
Yup…. 😅
110% absolutely it will. This guy might be able to edit a YT video.... But he truly isn't a very good car detailer.... Waste of internet data.
Not able to download Toolkit guide, says invalid value in Email id box and Workshop page is not opening saying page not found
Great video mang! Signed up for the training!
Wonder if microfibre cloths are bot as safe as noodle wash mits?
I do multiple wash mit method
this is exactly how I wash. I've always thought the two bucket method was dumb. Wastes a lot more water too.
I like the 0 bucket method. Spray your washing cloth with the garden hose or pressure washer.
Brushing a car before rinsing is a mistake.
Why? He's using a soft bristle brush. He soaked it with water and soap.
Agreed
@@CrystalNinja07because he can scratch it with all the dirt that hasn’t been rinsed yet
@@chll3194chfacts
I bilt hamber it first then use two buckets of shampoo one for one side and one for the other both with Grit guards then rinse
How do you clean the windows?
If you have a good pre wash you don't need 2 buckets, just one with a grid
Facts like. Bilt hamber
@@oscargoverno4696 I went from bilt hamber to infinity wax products, never looked back
Extra safety never hurts. Your not getting everything off with bilt hamber and a pressure washer, so that 10 or 15 percent left of dirt could be reintroduced back on the paint with only 1 bucket.
@@whitegoodman7465 if you have a grid it falls to the bottom the same it would in another bucket, never washed a car myself and spread dirt around and I don't use bilt hamber I use other products, bilt is pretty good but it runs off too fast, maybe that's the problem
Its supposed to fall and stay beneath the grit guard but sometimes it doesnt and constantly dunking in 1 bucket WILL reintroduce more dirt back onto the panel vs 2 bucket. I put a p&s absolute in my rinse bucket for the dirt flocculation (drops the grit to the bottom). Everyone wants to find a different method to 2 bucket because if done properly its hard to beat and find negatives so they wanna be different. As for bilt hamber, it is runny compared to other high ph snow foams like koch chemie active foam but it depends on gpm on the pressure washer among other things. I'm lucky if i get 4 mins of dwell without risk of drying even out of the sun later in the day @@andyroosterag
Didn’t pull the windshield wipers up… yeah no thanks 🙂↔️
I would do this but my clients would be like wtf are you doing
The one bucket method is literally two buckets,LMFAO
What brakebuster dilution do you use in the IK former?
Hey VassRulz, I use about 1:6 one part Brake buster five parts water. Sometimes, I'll use a little more brake buster
What reels do you use for your pressure washer hose, and air compressor?? and how did you get them?
Hey, I use an MTM Hydro reel for my pressure washer hose. I just bought it online. I don't use an air compressor for my mobile setup
Next up on the playlist was the 2 bucket method. You decide folks.
Good information by shaky video has made me dizzy
"Hi-on-die"
I turned off this video the second he miss pronounced Hyundai
Hahaha, I'm from New Zealand and live in Australia, that's how everyone pronounces it lol 😆