DIY Trim Compact Router Table - Light and portable design - Pt. 2
Вставка
- Опубліковано 30 вер 2024
- This is the second video about my new folding woodworking station. Today I’ll be showing you how to use and make this small router table for use with the workstation, or on its own. Light and portable. Perfect for a small DIY workshop.
Trim Router Table Plans: bit.ly/3LQvOFB
Trim Router Table Article: bit.ly/42NhJhr
Full project plans (Folding Woodworking Workstation): bit.ly/415PGci
All Folding Woodworking Workstation Videos: bit.ly/3O50d3d
How to modify the design: bit.ly/45Qoj9h
Follow:
/ paosonwoodwork
/ paoson_woodworking
/ paoson_woodworking
#woodworking #routertable #diy - Навчання та стиль
Trim Router Table Plans: bit.ly/3LQvOFB
Sir: You are a craftsman. Your work is amazing.
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice ua-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
You really put some manufacturers to shame with the quality of the things you design and build ... also the functionality of your designs will either match or (most likely) exceed the capabilities of commercially available products ... superb 👍
thanks!
That's the most ingenious idea ever, especially being able to use the saw fence at the router.
Incredible craftsmanship and attention to detail. Inspiring stuff as usual.
thanks!
Your work and your videos are simply incredible, it's a work of great precision I appreciate.
thanks!
Important topic is how you make the router lift with the plunge-base 😮
Hello,
Can you tell us wich router template you are using for the inserts? En wich router lift did you use?
Kind regards from the Netherlands 🇳🇱
I don't recommend this router template, it has little support surface for the base of the router: amzn.to/3XHUxjY
Check this out: www.paoson.com/forum/viewtopic.php?f=22&t=872#p9889
Small Shop Nirvana almost achieved with these kind of utilitarian fixtures. Thanks for sharing!
Another great project shown in an excellent video...always my favorite videos to watch.
As usual, your designs are ingenious, well thought out, and VERY workable. This time, the only thing I am not too happy with is the ON/OFF capability but with a TRIM router, there are no wires for an emergency on/off capability. Therefore ....not a good idea but it is accessible from almost any direction.
Nice project!!! 👍
As usual, a very well-designed, well-executed and useful build.
I love that MDF top. For some reason our stores here in the US do not carry colored MDF. Very frustrating!
check this out: trinityinnovations.net/product/colored-mdf-panels/
where are the layout specs drilling and dados
Great build! Whats your experience with the router lift? Can you lock it in position so the lift doesn’t move? Is the base included or do you have to modify your own router plunge base?
works great, and includes the plunge base: www.paoson.com/forum/viewtopic.php?f=22&t=872#p9889
where can I find the router lift at?
Which Dewalt table saw would work with this build. 8.5” 10” saw? Which model? Thanks
7:13 One more of the many, many reasons why a good tool manufacturer needs to make left blade track saws for right-handed users!
11:18 Are you using drywall board screws? They are made of a cheap, brittle alloy, I would not recommend them for machine building. In this case I doubt anything bad could happen, you have 12 screws holding the router and that is probably more than enough in this case even if those screws are 5 times weaker than any machine screw, BUT when building various machines, please keep in mind that most screws used in manufactured machines are not random screws. There are few kinds of "machine screws" that are highly resistant to vibration, tensile strength, etc. Sorry if I messed up something with my spelling, english is not my first language.
Un muy opinión The best Diy compact Router table
SUBSCRIBED!!! love this design!
Awesome creativity again Suso! Love the MatchFit assembly table idea to come!
Great work. We shared this video on our homemade tools forum this week 😎
I want to congratulate you on the quality of work and videos you do. The detail is just wonderful
*Great Small Moveable Router Table Cool Awesome!!* 👍🏻
brother you are amazing, genius project.
Wouah 🤩
Bravo pour ce travail de très grande qualité, c'est la super classe 👍
Suso, es usted un maestro! Como siempre, impecable.
This is great! I wish we could get the Black MDF here in the U.S. .
www.paoson.com/blog/en/how-to-modify-the-folding-woodworking-workstation/
Super, bravo maestro 🔥💪👌👍
Do you think the Enjoywood router lift works with your design? ua-cam.com/video/ji0rqMfVaDs/v-deo.html
I think that router lift is too heavy for this design
Great setup! What did you use for finish on the black MDF?
thanks! spray matt nitrocellulose
I enjoy watching your videos and sometimes using some of your ideas.
Also, I assume you already know by now you were talking about the TABLE saw and not the bend saw as you multiple times mentioned in your voice-over. That thing with a big turning blade (the yellow DeWalt) is a table saw (job site size, in your case). I guess you were just too tired for that day.
I had understood that these small table saws are also called bench saw, right?
i can see that you are using piher clamps
i would like to buy can you mention how can we buy this 🙏
www.paoson.com/forum/viewtopic.php?f=22&t=273
Super bravo maestro👍💐
Hi. can You tell me where to buy oak wood and other tweard wood in spain? I'm moving near Alicante in the fall and it would be good to know.
you have one of the largest wooden shops in valencia, google "Tamalsa"
@@Paoson_Woodworking 👍
what is the black board called what type of material is that.
www.paoson.com/blog/en/how-to-modify-the-folding-woodworking-workstation/
How did you do lift router ? Thank you
www.paoson.com/forum/viewtopic.php?f=22&t=872#p9889
amazing work, it turned out wonderful! 👏👏👏
👍👍👍
Where is the Adjustable Router Jig from?
I think there are better, it has a small support surface for the router: amzn.to/3pLy20K
@@Paoson_Woodworking How about the router lift? can you post a link for that? Great job by the way! Love your stuff
check this out: www.paoson.com/forum/viewtopic.php?f=22&t=872#p9889