Mitsubishi Triton performance, EGR soot tricks and traps. How to fix.
Вставка
- Опубліковано 9 лют 2014
- www.mrtperformance.com.au
PICTURES HERE
www.facebook.com
comming
Another update from MRT about the Mitsubishi treiton Turbo Diesel 2500 cc engine and how the optional features of the factory ECU can be upgraded using EcuteK factory ECU tuning software to significantly reduce the EGR soot build up and save $$ in future cleaning costs.
For more info on this car visit www.mrtperformance.com.au/manu...
and www.mrtperformance.com.au/perf...
as well as www.ecutek.com.au/
Thanks. This was the cause of my drama and saw it as soon as i removed the intake pipe. LEGEND!
I like the video's that are presented here, i am planning to do maintenance to my Triton which feels like it has ALOT of performance that only lasts 1-2 weeks and then the car runs sluggish for a little while then it suddenly kicks in again, and gains 200-600 revs instantaneously.
I am planing a Manifold clean, Exhaust upgrade and downgrade installing 1-2 resonators on a 2.5 inch pipe, Turbo check and clean as well as planning to install a inter-cooler.
Some days the car runs at the specified temperature, and other days it runs half way. If it climbs higher then that, i stop the car as soon as i can, see if i can idle it cool, and if not shut it down.
I am on my P's and the car's has potential according to the way it drives everywhere. I am gearing up every 2-3 seconds give or take.
And the power on the car has made me accidentally do burnouts, so i let the car idle rather then give it throttle while i am taking off in forwards or reverse.
Hey guys do you an instructional video on how to remove and clean the EGR valve and components on the 2011 Mitsubishi Triton, 2.5 DiD, thanks.
That was very informative , this is like a pcv valve on a old Holden red motor but more advanced for diesels ?
Your title say HOW TO FIX- you didn't show us anything!
Hi
I have a 2004 L200 2.5td, wouldn't removing my egr valve remove the sooting problem entirely?
would an egr simulatorwith a blanking plate work
Hey guys how do you replace the thermostat on a Mitsubishi Triton 2010 engine 4D56?
can you show how to remove and install diesel injectors 2.4 engine
hi
i have a Mitsubishi pick up L200 4x4 2007
it doesn't going to fast
i check it in the electronic and they said that there is no problem with the motor and the check engine light doesn't light
put i now that the normal engines acceleration after 2rpm it goes to fast
put mine doesn't go like that so what should i do
thanks
Excellent information.
Isn't there a can of spray that loosens the gunk?Have seen such a can on youtube.
Hey sir can i ask how to fix my mitsubishi canter 2017 turbo manifold its oily and black smoke occure
How bad would a MY20 2.4L MR Triton with 18,000ks be? I didn't install my provent oil separator till then. Is it worth cleaning out the intercooler and intake, or should be good for now?
Thanks for the videos on this it's really helped in understanding why my ute is not having so many problems. Does the spray stuff work as thats all the Mitsubishi dealership offered up here in Brissy. Also can I ask how much would be a reasonable cost to do a full clean on a Triton 3.2 MN?
Mitsubishi Capalaba offer a egr & inlet manifold clean for $396 best to get it done with a service.
Does tunning out egr operation affect the way the dpf operates?
Has anyone done this on mq as would like to see
my egr tube got blocked with a ball bearing somehow...
Catch can to stop blow bye oil mixing with soot?
Technically legal if not venting atmospherically.......
Can this cause a rattle noise on acceleration
Good one, cheers.
Not too hard to pull the intake manifold off a Triton. But the crap that is in it is another matter. It requires soaking overnight in some pretty harsh chemicals and then attacking it with a 3000psi pressure washer, then you may have to do the job all over again, honestly it can be that bad..
So you don't recommend paying $200 bucks for a spray can of snake oil to clean it?? But the sales guy said it was the latest wonderful " liquid ceramic polymer" with added "magnetic turbo scrub power lather technology" that would get into to every void in the manifold, remove all soot buildup and get it spotlessly clean. You only need to buy eight cans of it as well.
But he did say that in some rare cases, extra cans may need to be purchased, especially if your engine has more than a Three cylinders.
What about seafoam that everybody talks about
my 2010 blows smoke, there's a lag when you boot it & the most worrying is the surging? it has the auto with over drive & i need some help
best call us
any chance you can do a video on electric side of how to check egr valve please
thanks
check exactly what BTW?
MRT Performance how to check the motor part of electric egr valve
mitsubushi L200 Diesel pickup
4D56 engine
why there is awhite smoke coming out from the exhaust?
a result ofthe soot cleaning on car
Mitshubishi montero 2.5 turbo diesel,I encounter check engine light, I try scan using obd2, it's come with P0089 error, I already change suction control valve but still has check engine light, when I start the engine with 1000 rpm, it's goes normal, but in idle with 650 rpm, check engine will appear and limp mode of my engine, please help me diagnose this problem, thanks
Fuel pressure sensor on the fuel rail my friend. Did you ever fix this?
Should you use premium diesel and full syn oils to prevent soot build up?
He is a salesman ...what you expect?
It’s not enough but if the engines clean already then that’s fine but once ur car starts choking for air it’s all over
Hi, I have a (for me atleast) tricky problem with my L200 -02. Im from Sweden so I can´t bring it to your shop sadly.... The symptoms are that it sometimes, when I have driven shorter and slower runs starts to run bad below 2200rpm, it sounds like the turbo spools up and down and it smells diesel.... So almost no power and rough running... Over 2200rpm it runs fine... Then if I turn of the engine and start again it runs fine for a while... Feels like it is some selenoid or something
Sounds like dirty fuel and need new filters. A pre filter to keep water out of fuel, you can drain the water out if the bowl shows water. Do you have an oil catch can? A must for these cars.
Hi my 2015 has just lost power its no longer able to acellerate or even hold speed in top gear going up a hill that i drive up every day it used to be able to tow a boat up and hold speed now it is slowing down unloaded. has done 20,500km air filters still clean
+possumtrapper please call us 0297674545
i'm on the other side of the Tasman ;)
sorry
Did you ever find the issue??
my oil sensor blink can you help me please ,thank you.
best call us
my 2012 triton grl feels like its choking, lagging, and blowing black smoke! please help and give me some tips as to what it could be
forgot to mention, the engine light came up and mechanic scanned it, returning a high air flow reading
u drvie slowly everyday tht why so many carbon black smoke I recommended u to drive fast sometimes to rwmove black smoke
@@joenader91 possible MAF issue, faulty sensor? Have you tried replacing it yet.
So many dramas the customer has to put up with; eventual DPF failure, regeneration cycles not performing as should, choking up the inlet manifold.
Petrol and Diesel direct injection I thought was wonderful; more power and torque, less fuel consumption and emissions. I've now come to realise that carbon will form on the top of the inlet valves and there is virtually nothing you can do. Putting fuel additives in will do nothing as the fuel is not going past the intake valves. So much for saving money especially on a diesel.
Still, if it wasn't for small businesses as above the consumer would absolutely up shit creek. I think these engine designers should be made to produce an engine that is reliable for 300,000 without undoing an extra bolt apart from the normal service routine which does not include cleaning DPFs, intakes, EGRs etc. If an filter is required in the PCV system, then design it with reusable filter screens etc easily accessible and tested under all load conditions to be very effective at taking out oil vapor before it is released back into the engine.
If the engine cannot do 300,000 without a minor overhaul of components then it is not "fit for purpose" and that engine should be banned from this country.
I know, I know, I can all hear you saying that it is not the engine designers fault, and I do agree to a point. The emission regulations make these bolt on fixes necessary. Yes, but they are not good enough obviously.
The customer has no way of knowing a reliable engine from another. I'm starting to wonder if I should be going back to the mechanical fuel injection days, using a bit of Decarboniser with every tankful to keep the valves clean via port injection.
Just show how
no action talk only....
...will benefit performance and keep it cleaner and the NOx will go through the roof. 🤦♂️🌎
Egr what a stupid idea- helps the greenies sleep at night right?
+joelyboyblue Yeah pretty much. Their all warm and fuzzy because of a wanky system that owners have to fix. The irony is I bet greenies who own a turbo diesel would get the EGR blocked off as well.
Mate You are educating people just how to spend about 2000$ in Your shop....sorry but for general diesel owners ( non business vehicles ) blanking plates chips and diy have to do!!!!! Government should step in to stop this ripoff on every car designed to die.... But they love they GST hahaha we are not blind.
you talk too much