Thanks for the details sir. This helps. I think you have added mud flaps as well for your front wheel to make sure the dust does not hit the engine and also I could see honda engine guard accessory as well on your bike with split seats and new grab rail of the split seats. Thanks for sharing
Hi Pradeep , You missed to mention the mudguard flap I think . Otherwise very useful. Crisp !! My friend is going to take a anniversary edition this week . Useful video for many of the new cb 350 buyer’s .
In fact I had put a small Studds Vault box on the side to keep some small things, removed that also to go back to the core minimal beautiful design! Tank side pads will make using a magnetic tank bag difficult, also I dont scratch the tank much anyway, been good for a whole year 😃🙏
Hi, thanks for update. Can you please update me on below points - 1. Sahara seats with Rubber foam and gel pad or cover with rubber foam. 2. Along with seat covers of Sahara , shall i insert gel pad also or only gel pad alone enough on stock seat or with seat covers. 3. Apart from carbon racing any other handle bars advisable, since inclined not in stock. 4. Backrest with sahara or custom in jc ROAD. 5. Blind mirror, Which one you purchased. please update me
Hi there, these are not standard weights. I believe these are for the CB300R - they had sourced a batch of these from Thailand and sold them in Bangalore for CB350.,
Hi Sir, very nice reporting on your accessories. Actually you have not mentioned about foot rest. But I would like to know about the silver lining bar end weights. From which bigwing you got it. 🙏
Mr Pradeep, hope you are doing great. I am 5'4, wanted to install inclined handle bar risers for cb 350. do we need to do cable rerouting for the same ? is it ok to do so ? else i can get the normal ones.
You must have ridden this bike in rains enough so would like to know 2 things, 1- is the front mudguard extender doing its job well, 2- do you feel the need to install additional tire hugger at the back. Lots of honda cb350 owners are complaining about rust issues, would like to know how you manage it maintenance wise to keep your bike rust free? I feel like a separate 5-6min short video on monsoons and rust maintenance etc would be helpful? Thanks for your videos.
to be very very honest with you, due to last couple of years in WFH mode, I have ridden in rains maybe 3 times in the whole year, so really haven't experienced some of these real issues. I have tried hard to look for rust, but found very minor rust - inside the handlebar pipes, when i changed bar end weights and on a couple of screws under the mudguard. However it is made of Iron and steel which is subject to rust, so, doesn't bother me. I do a WD40 spray once in a while on parts that I feel are most exposed, and it seems to be doing its job so far.
I have ridden my bike extensively in chennai rains, this is my experience. 1. Mudguard extender is must have accessory, it does the job exceptionally. 2. Tyre hugger is recommended if u ride with a pillion mostly or else just pass 3. There are rust issues in my bike, but they're just superficial rust, if told the service guys and they took care of it. They'll even repaint if u have paint peel off issues .
Hi, really good info on bike, i recently purchased anniversary edition. Would like to know about few things - 1. Bar ends aluminium better one or stock one. Mine got broken left side,due to stupid person in traffic. 2. Windscreen installation from honda, local Shop or carbon racing? Which would be better. 3. Sometimes shifting gear down, feels hard with full clutch holding also.Is it normal or need to highlight when giving for service. 4. Have you installed seat covers yourself or local Shop. 5. Mobile holder suggestions or can i go with bobo only.
Hi, Here you go 1. The aluminium ones are good. Lots of plastic stock bar ends get broken by slightest of reasons 2. I would suggest, keep it windscreen free. If at all you really need one, go for the OEM Honda fly screen. I know at least 3 people who spent money on Carbon Racing windscreen and removed later due to too much head buffetting and noise! 3. It's not normal, pls ask service to check 4. Seat covers are from Sahara Seats - they are on amazon also I think and have their own website 5. Bobo is very good - I recommend the Jaw one and not the Claw one.
@@Motoccino hi pradeep, bar end weights from Which showroom have u got it fixed, since i checked in north Bangalore there are not aware of it Seems. If you can let me know the showroom then, i am planning for same to get it fixed.
@@Motoccino Hi Pradeep, Can you let me know if this is OEM bar Ends from Honda Big wing? Because I checked in few big wings in Chennai they are not sure of this thing. They have only plastic ones in stock
Sir I've booked Anniversary edition green color but now getting confused between black Anniversary edition and green...I'm worried about matte color maintenance in long run.as the fenders also in matte green no chrome.
@@Motoccino I followed your color selection on Vinay's Channel got Green and I'm really happy for that..you both actually inspired me towards CB350 😁..thanks for everything you guys do🤗
Hi pradeep , I'm getting my hness cb350 anniversary edition matte green next week , I'm confused with choosing accesories, also there is like two or three coating options , which one should I choose cermamic + ppf which costs 8.4k or just ceramic coating 3k ???
These were a special import from Honda Thailand for some left over stock they had for CB3000R, which I got fitted to the bike. These are not a regular accessory.
Thanks for the video. Some ideas lock the riding jacket would be intresting. And any plans to get top box for h'ness? I have been looking for one, any suggessions? Mainly I need it to keep my jackets & knee gaurds.
i have no plans for a top box, no. But if you're interested you can go for the Zana top rack and a Givi or Shad top box - about 32-26 liters capacity. I will do a video on locking helmet and jacket on the bike soon.
@@suhasp6540 Yes I feel worth, as long as you don't spend a ton of money - the whole tank itself costs 5500 to buy new, so pls dont spend more than that on PPF. I did try to do PPF on my matte, but due to some manufacturing defect or something, the lacquer they apply to get that matte finish, started peeling off with the PPF. I replaced the tank, but after that havent had the courage to try PPF again, but I have seen plenty of matte greens successfully PPF'd. For eg my Himalayan has PPF, since I use magnetic tank bags all the time and also my Versys already had PPF when I bought it. I always strongly recommend PPF for all bikes.
@@Motoccino Thank you Pradeep, I will surely try to look for a good quality PPF. Mine in anniversery edition, so I am little worried I may not get the same tank to purchase again.
Not worth it in my opinion. Small fuel tank, very compact, not comfortable for pillion, not comfortable for tours (except for many customizations) - I think its too much of a very specialist bike and too less of a bike for too much money! All my own opinions for my own purchase criteria of course.
Does the Sahara seat covers with foam add to the seat height.. My height is 5.5 and seat height is already little on the higher sode for me, though manageable.. Do you recommend these seat covers for my height ?
Why most of the highness owners go for handle bar risers?... What is your height?...why do you choose to go for handle bar risers. ?... To whom do you suggest to go for handle bar risers?
there is no one good or best answer to this, all depends on comfort level - without risers also its comfortable, with risers its even more comfortable.
Sir green anniversary with body colored mudguards or green DLX with chrome mudguards, which looks better?? Chrome looks better in my eyes in videos.. Whats your suggestions as I don't have any interest in Bluetooth system..
@@Motoccino Great Pradeep Sir.. A fan of your way of talking from Kolkata.. I will book it in December.. Sir do you have any Instagram id or Facebook Id where I can follow you??
@@abhikachieverofdailygoals1621 thanks for your kind words Moshai! 😀 I am on instagram on moto.ccino however I am not a very active social media guy as you can probably tell!
@@Motoccino I have followed you. Will text you if I have to ask something. And Sir it's better to be really social than in Social Media.. And Definitely you are in 1st category.
very nice. Yes, worth going for - you can chose any add on = either a gel or an additional foam to add even more comfort. Aesthetics also can be customized and looks beautiful.
Hi Pradeep, Have you removed avengers rear view mirror? Because I got a new cb350 highness and thinking to install avengers rear view mirror, could you please share your thoughts?
@@Motoccino thank you. I finally bought the green anniversary addition. With brown seats. However the showroom is unable to give me brown color backrest. Do you know where is this available?
@@Motoccino I am looking forward to buy one, don't know how is the production quality now. But I feel it's better than Classic 350 [reborn]. It could have been really good if they had brought the back side of the front fender a little more down. And the same goes with the rear fender too. What changes have u done to those? Or do u like the way it is?
@@shashanksrivathsav to be honest I have sold the cb350 and have the classic reborn now 😅. Overall the classic is a bike I enjoy more overall personally. Not to say there’s anything wrong with cb. For me it’s the tall gearing and frequent gear changes in city that really killed it.
I assume you mean the one on top of the exhaust? It's by BS Auto accessories bsautoaccessories.com/product/footrest/hiness-ladies-footrest-in-stainless-steel/
Yes suvam. This is why I always rely on my written notes which I missed this time apologies. I will do a small top up video with a couple of other missed things.
@@Motoccino thanks, my bike engine miss fires at times when I close the throttle. Had taken it to the service centre, they just cleaned the spark plug, this hasn't resolved the issue.
It's not available in Belagavi Bigwing. However online there are similar bar ends for most of the Honda super bikes but cb 350 variant is not listed in it.
@@Motoccino Thanks for the reply. I stay in Bangalore in which location in Bangalore it is available. I checked in mekhri circle showroom it is not available
After seeing your reviews I considered buying a CB350 for months but eventually decided to 'bite the bullet' and went in for a pre-owned Classic 500 instead. I've been riding a cast iron 350 for decades, so the 500's power and low-end torque are very addictive. Puttering around the city is a lot of fun. Hopefully Honda will come out with a CB500 or CB650 soon. Now that is something I'll plonk my money on. If it's priced under 5 lakh, that is.
absolutely great decision, I also reluctantly sold my Standard 500 after the CB came home. As you say, I really miss the low end torque - the lazy chillaxed out Bullet crawl as I like to term it! 😃
@@mukundshenoy3142 I never felt there were even vibration "issues" to start with. I installed these more for the looks and a better solution to the plastic ones, that's all.
@@javeedabdul Mine is original green version not anniversary edition. I installed Hyperrider rear carrier after making this video. Its a very good carrier and I love it.
Hi Pradeep, as usual a nice video from your side and covering all points. One question from my side. Is the seat really split seat or a single seat split till the bottom layer?
I spent in more than one hour go through for Questions and answers 🙃 too useful dear friends. Thanks for your kind information.
Your CB looks beautiful with all these minimal mods ❤️
thanks man, wanted to maintain the beauty of minimalism
Yes it is indeed
Splendid and on point as always
I love from Bangalore Kkp sathanur
One of my favourite person and channel , so underrated . Wish more people watch your videos Pradeep bro ❤️💯
Hey buddy how have u been. Thanks for your kind words man. 😊🙏
@@Motoccino I am doing great brother , hope you are too , let me know when you are up for a ride will join you after this weekend
@@PradeeponWheels Definitely bro, its been forever, we should and will catch up soon. 😃🙏
Thanks for the details sir. This helps. I think you have added mud flaps as well for your front wheel to make sure the dust does not hit the engine and also I could see honda engine guard accessory as well on your bike with split seats and new grab rail of the split seats. Thanks for sharing
Hi Pradeep ,
You missed to mention the mudguard flap I think . Otherwise very useful. Crisp !! My friend is going to take a anniversary edition this week . Useful video for many of the new cb 350 buyer’s .
Yes a small top up follow on video coming. Apologies for these misses.
No . No you are the best analyser and we want to support you that you don’t miss out anything Guru !!🤝🤝
Hi Pradeep, Nice video. please make a video on saddle stays, carrier, and back rest. thanks
Yes I'm also curious for touring accessories. What we need it??
Nice sticker on tank
According to some reviews there are 4 problems with CB350.
1. Battery / Self Start
2. Wobble
3. Brake Pads
4. Rust
Pls get tank side pads. Its imp to avoid scratches on tank. Also a small bag at back would be of great utility value
In fact I had put a small Studds Vault box on the side to keep some small things, removed that also to go back to the core minimal beautiful design! Tank side pads will make using a magnetic tank bag difficult, also I dont scratch the tank much anyway, been good for a whole year 😃🙏
I asked for doing the ceramic coatingnkn my bike and they said it will cut the warranty
Hi, thanks for update. Can you please update me on below points -
1. Sahara seats with Rubber foam and gel pad or cover with rubber foam.
2. Along with seat covers of Sahara , shall i insert gel pad also or only gel pad alone enough on stock seat or with seat covers.
3. Apart from carbon racing any other handle bars advisable, since inclined not in stock.
4. Backrest with sahara or custom in jc ROAD.
5. Blind mirror, Which one you purchased.
please update me
is there an online site to order oem parts like tank pad grip and leg guard ? did you had problem with zana crash guard ?
Nice video Sir could you please share from which Bigwing Showroom did you got those bar end weights
Hi there, these are not standard weights. I believe these are for the CB300R - they had sourced a batch of these from Thailand and sold them in Bangalore for CB350.,
@@Motoccino Thank you so much for your response Sir
Hi Sir, very nice reporting on your accessories. Actually you have not mentioned about foot rest. But I would like to know about the silver lining bar end weights. From which bigwing you got it. 🙏
Mr Pradeep, hope you are doing great. I am 5'4, wanted to install inclined handle bar risers for cb 350. do we need to do cable rerouting for the same ? is it ok to do so ? else i can get the normal ones.
You must have ridden this bike in rains enough so would like to know 2 things, 1- is the front mudguard extender doing its job well, 2- do you feel the need to install additional tire hugger at the back. Lots of honda cb350 owners are complaining about rust issues, would like to know how you manage it maintenance wise to keep your bike rust free? I feel like a separate 5-6min short video on monsoons and rust maintenance etc would be helpful? Thanks for your videos.
to be very very honest with you, due to last couple of years in WFH mode, I have ridden in rains maybe 3 times in the whole year, so really haven't experienced some of these real issues. I have tried hard to look for rust, but found very minor rust - inside the handlebar pipes, when i changed bar end weights and on a couple of screws under the mudguard. However it is made of Iron and steel which is subject to rust, so, doesn't bother me. I do a WD40 spray once in a while on parts that I feel are most exposed, and it seems to be doing its job so far.
I have ridden my bike extensively in chennai rains, this is my experience.
1. Mudguard extender is must have accessory, it does the job exceptionally.
2. Tyre hugger is recommended if u ride with a pillion mostly or else just pass
3. There are rust issues in my bike, but they're just superficial rust, if told the service guys and they took care of it. They'll even repaint if u have paint peel off issues .
Even without add on of 0.5inch foam they are including it for free for this particular design.
Does this cover add to seating comfort?
Sir ..bought anniversary edition matte green...last week
But after watching New yezdi...felt jealous
No need to be jealous, even you have a superior product!
Sir power and pick up is much better in yezdi
@@japepritam There will always be something better coming my friend! 😃
We have gotten premium bike 🏍 😎 😀
Hi, really good info on bike, i recently purchased anniversary edition.
Would like to know about few things -
1. Bar ends aluminium better one or stock one. Mine got broken left side,due to stupid person in traffic.
2. Windscreen installation from honda, local Shop or carbon racing? Which would be better.
3. Sometimes shifting gear down, feels hard with full clutch holding also.Is it normal or need to highlight when giving for service.
4. Have you installed seat covers yourself or local Shop.
5. Mobile holder suggestions or can i go with bobo only.
Hi,
Here you go
1. The aluminium ones are good. Lots of plastic stock bar ends get broken by slightest of reasons
2. I would suggest, keep it windscreen free. If at all you really need one, go for the OEM Honda fly screen. I know at least 3 people who spent money on Carbon Racing windscreen and removed later due to too much head buffetting and noise!
3. It's not normal, pls ask service to check
4. Seat covers are from Sahara Seats - they are on amazon also I think and have their own website
5. Bobo is very good - I recommend the Jaw one and not the Claw one.
@@Motoccino hi pradeep, bar end weights from Which showroom have u got it fixed, since i checked in north Bangalore there are not aware of it Seems. If you can let me know the showroom then, i am planning for same to get it fixed.
@@beast_beautie Mysore Road location
@@Motoccino Hi Pradeep, Can you let me know if this is OEM bar Ends from Honda Big wing? Because I checked in few big wings in Chennai they are not sure of this thing. They have only plastic ones in stock
And Pradeep, can you share your thoughts on PPF for bikes? I got CB350 same green DLX ..
Nice Helmet locks you have, wish to see you in Bangalore someday... Could you please share the link for the locks.. That would be much helpful.
www.amazon.in/gp/product/B09DYXNLXV/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
@@Motoccino Thanks a lot 💕
Superb locking system 👏
Is that seat cover color brown or dual tone brown? Looks pretty good. And do you think gel pad in worth getting instead of extra foam?
I found foam better for me, because I felt that gel pad will degrade over time. Thats dual tone.
Sir I've booked Anniversary edition green color but now getting confused between black Anniversary edition and green...I'm worried about matte color maintenance in long run.as the fenders also in matte green no chrome.
then you can go for the black one
@@Motoccino I followed your color selection on Vinay's Channel got Green and I'm really happy for that..you both actually inspired me towards CB350 😁..thanks for everything you guys do🤗
Hi pradeep , I'm getting my hness cb350 anniversary edition matte green next week , I'm confused with choosing accesories, also there is like two or three coating options , which one should I choose cermamic + ppf which costs 8.4k or just ceramic coating 3k ???
i did not go for any coating, and in 2 years, I faced no issues
Hi pradeep hope you are doing fine i need a bike for a longterm, purpose will be for commuting long rides riding with family members etc
All good sir. I would recommend the classic 350 reborn.
Please describe the handle bar ends I have tried every where ...please provide link
These were a special import from Honda Thailand for some left over stock they had for CB3000R, which I got fitted to the bike. These are not a regular accessory.
Sir what's the use of handle bar weights please explain
Pls read this cdn.shopify.com/s/files/1/2464/5211/files/How_much_weight_is_right_weight.pdf?v=1630817925
@@Motoccino super bro. You're amazing man. I learned from from you lot. Thanks.
Thanks for the video. Some ideas lock the riding jacket would be intresting. And any plans to get top box for h'ness? I have been looking for one, any suggessions? Mainly I need it to keep my jackets & knee gaurds.
i have no plans for a top box, no. But if you're interested you can go for the Zana top rack and a Givi or Shad top box - about 32-26 liters capacity. I will do a video on locking helmet and jacket on the bike soon.
@@Motoccino Thank you
@@Motoccino Another question, do you know any paint protection for Matte Green? Do you feel it's worth spending on paint protections?
@@suhasp6540 Yes I feel worth, as long as you don't spend a ton of money - the whole tank itself costs 5500 to buy new, so pls dont spend more than that on PPF. I did try to do PPF on my matte, but due to some manufacturing defect or something, the lacquer they apply to get that matte finish, started peeling off with the PPF. I replaced the tank, but after that havent had the courage to try PPF again, but I have seen plenty of matte greens successfully PPF'd. For eg my Himalayan has PPF, since I use magnetic tank bags all the time and also my Versys already had PPF when I bought it. I always strongly recommend PPF for all bikes.
@@Motoccino Thank you Pradeep, I will surely try to look for a good quality PPF. Mine in anniversery edition, so I am little worried I may not get the same tank to purchase again.
Hi Sir, what is your opinion on Honda cb300r and is it worth buying for 2.77 lakhs ex-showroom price.
Not worth it in my opinion. Small fuel tank, very compact, not comfortable for pillion, not comfortable for tours (except for many customizations) - I think its too much of a very specialist bike and too less of a bike for too much money! All my own opinions for my own purchase criteria of course.
@@Motoccino extraordinary answers 👌
Does the Sahara seat covers with foam add to the seat height.. My height is 5.5 and seat height is already little on the higher sode for me, though manageable..
Do you recommend these seat covers for my height ?
of course, it doesnt do anything negative for anything to do with persons height! 👍👍
Hi Pradeep… Do the black avenger mirrors add look to the bike or chrome is preferred ? Also is this your new home?😊
Chrome is very good, and yes it will be a house that I will move into soon, very good eye for detail 😃🙏
@@Motoccino congratulations Pradeep!!!
Sir pls suggest a color maat green or glossy black in cb350 hness .which one is easy to maintain and less prone to scratches
Glossy black would be good for that. And it’s a timeless color that suits all occasions and places. You can go with that in my opinion.
But being glossy I personally would get that PPFd immediately for peace of mind.
Mat black
Sir sahara seat provided u dual seat or u got it from bigwing..coz dlx model don't get dual seat
Dual split seat is an official Honda accessory - you get it in all bigwings. Only the seat cover is from Sahara.
Why most of the highness owners go for handle bar risers?... What is your height?...why do you choose to go for handle bar risers. ?... To whom do you suggest to go for handle bar risers?
there is no one good or best answer to this, all depends on comfort level - without risers also its comfortable, with risers its even more comfortable.
Sir green anniversary with body colored mudguards or green DLX with chrome mudguards, which looks better?? Chrome looks better in my eyes in videos.. Whats your suggestions as I don't have any interest in Bluetooth system..
i have seen both of them live and I feel DLX with chrome is better!
@@Motoccino Great Pradeep Sir.. A fan of your way of talking from Kolkata.. I will book it in December.. Sir do you have any Instagram id or Facebook Id where I can follow you??
@@abhikachieverofdailygoals1621 thanks for your kind words Moshai! 😀 I am on instagram on moto.ccino however I am not a very active social media guy as you can probably tell!
@@Motoccino I have followed you. Will text you if I have to ask something. And Sir it's better to be really social than in Social Media.. And Definitely you are in 1st category.
Which colour you bought from sahara seats , i am little confused with my cb's new dual seat of the anniversary edition
Mine is Honda Highness CB 350 Split Seats Cushion Seat Cover
- Add On: Rubber Foam
- Color: Dual Tone Brown
- Thread Color: Whichever Suits Best
Whether the pillion seat can be removed to give a classic look ?
No, cannot be removed.
howz sahara seats ... is it worth of fixing it on top original
very nice. Yes, worth going for - you can chose any add on = either a gel or an additional foam to add even more comfort. Aesthetics also can be customized and looks beautiful.
Hi Pradeep, Have you removed avengers rear view mirror? Because I got a new cb350 highness and thinking to install avengers rear view mirror, could you please share your thoughts?
yes please install that. Thats the best one. I only removed it for a change.
Bro... Could u pls share the link for mobile mounter I liked and wanted it to mount on my bike
Limited-time deal: BOBO BM3 Claw-Grip Aluminium Waterproof Bike / Motorcycle / Scooter Mobile Phone Holder Mount, Ideal for Maps and GPS Navigation (Black) www.amazon.in/dp/B07RWDXNTR/ref=cm_sw_r_cp_api_glt_i_dl_32RHMZQGNMKABKASDE2Z
I am planning to buy this. But quick ques, i heard there are lot of blind spots on the standard mirrors. How did you replace it?
You can go for other mirrors like Suzuki burgman or avenger mirrors. Even blind spot mirrors on Amazon help a lot
@@Motoccino thank you. I finally bought the green anniversary addition. With brown seats. However the showroom is unable to give me brown color backrest. Do you know where is this available?
@@kuppagautam1643 not sure about brown backrest... i had the hyperrider carrier with integrated backrest but in black
Is there any quality issue with zana crash guard?
Nope, an excellent product
What are your thoughts about the new CB300R?
Too less a bike for too much money. Not for me.
Hi Pradeep - quick question pls..the bobo mobile holder - is it compatible with iPhone- pls let me know..thanks 👍🏼
i have used it ONLY with iphones 😃
Does it have any heating issue?? Iska engine kitna heat hota hai? Does it get uncomfortable??
no heating issue whatsoever. All normal range.
@@Motoccino Thank you
What bout its mileage and performance?? Is it worth buying?
@@danishjacob4630 mileage around 33-35. I would also encourage u to look at the new classic 350 also. That’s also a very good bike.
Hi, can u let me know if have faced any corrosion, battery, and rim bending issues?
nothing of the sort. Very peaceful ownership.
@@Motoccino I am looking forward to buy one, don't know how is the production quality now. But I feel it's better than Classic 350 [reborn]. It could have been really good if they had brought the back side of the front fender a little more down. And the same goes with the rear fender too. What changes have u done to those? Or do u like the way it is?
@@shashanksrivathsav to be honest I have sold the cb350 and have the classic reborn now 😅. Overall the classic is a bike I enjoy more overall personally. Not to say there’s anything wrong with cb. For me it’s the tall gearing and frequent gear changes in city that really killed it.
Hi Pradeep. Could you pls tell me where did you purchase the rear foot rest?
I assume you mean the one on top of the exhaust? It's by BS Auto accessories bsautoaccessories.com/product/footrest/hiness-ladies-footrest-in-stainless-steel/
Thanks a lot
You missed the Mudguard extender
Yes suvam. This is why I always rely on my written notes which I missed this time apologies. I will do a small top up video with a couple of other missed things.
@@Motoccino 😂true. Love your content 🔥🔥
Hi sir. Is matte green need more maintenance than metallic. ?
Yes, of course metallic good for longer life.
Thanks for response. So normal wash is not enough
Sir will u recommend any paint protection idea... matte green metallic
I have not done anything, so far its holding good, I ride carefully and take basic care. Seems good so far. I am not planning anything myself.
Thank u boss
@@Motoccino nice to hear from you bro.
Hello Pradeep, have you considered using an iridium spark plug?
Not felt the need so far Ajay
@@Motoccino thanks, my bike engine miss fires at times when I close the throttle. Had taken it to the service centre, they just cleaned the spark plug, this hasn't resolved the issue.
Sir. Can you send the link of bar ends. I am not getting these anywhere online
It’s not online. I got these at bigwing Topline bangalore.
It's not available in Belagavi Bigwing. However online there are similar bar ends for most of the Honda super bikes but cb 350 variant is not listed in it.
👌
From which Honda big wing showroom you got handle bar end.
Bangalore bigwing Topline
@@Motoccino Thanks for the reply.
I stay in Bangalore in which location in Bangalore it is available. I checked in mekhri circle showroom it is not available
@@anandraosindhe Mysore Road bigwing. I think it’s also available in Lavelle Road Topline. Pls call their locations to make sure they have it in stock
@@Motoccino Thank you very much
Where did you buy the rear Grab rail (pillion holder )?
plz share the details ...
sorry didnt get which one?
@@Motoccino can u share ur insta id please ...so I can tell u clearly ....
@@ajaymj2541 it’s moto.ccino
But perhaps you can also point me to the time stamp where I show it?
3000 for handel bar end ?
yes it was imported from Thailand Honda, 1 batch
After seeing your reviews I considered buying a CB350 for months but eventually decided to 'bite the bullet' and went in for a pre-owned Classic 500 instead. I've been riding a cast iron 350 for decades, so the 500's power and low-end torque are very addictive. Puttering around the city is a lot of fun.
Hopefully Honda will come out with a CB500 or CB650 soon. Now that is something I'll plonk my money on. If it's priced under 5 lakh, that is.
absolutely great decision, I also reluctantly sold my Standard 500 after the CB came home. As you say, I really miss the low end torque - the lazy chillaxed out Bullet crawl as I like to term it! 😃
I am black anniversary edition owner For helmet holder how to get that wellcrow? Which kind of shops we can get it
www.amazon.in/gp/product/B07R8FJZ7B/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Hi Pradeep any reason you have removed the zana crash gaurd and went back to the stock?
no reason. just for change.
@@Motoccino would you suggest to change the OEM to Zana for additional protection, since am planning to do so.
@@swissworld36 yes sure you can
@@MotoccinoThanks a lot for your advise Pradeep.
Sir ji from which bigwing u got bar weights? I am looking for one for my highness
Available in bigwing Topline Bangalore. Both in Lavelle Road and also the Mysore Road service centre.
@@Motoccino thanks for the reply. I will check tomorrow. BTW what’s ur review after installing the weights? Does the vibrations further reduced?
@@mukundshenoy3142 I never felt there were even vibration "issues" to start with. I installed these more for the looks and a better solution to the plastic ones, that's all.
@@Motoccino thanks. 🙏🏻
did you remove the anniversary edition sticker ?
Mine's the OG. Not the anniversary edition.
@@Motoccino what OG? why didn't you have the carrier on the back of the bike? I am planning to have one. any reason for not installing it?
@@javeedabdul Mine is original green version not anniversary edition. I installed Hyperrider rear carrier after making this video. Its a very good carrier and I love it.
@@Motoccino I am planning to purchase JB Carrier For Hness much but haven't seen anyone tried yet. create one more video with additional fittings.
Hi Pradeep, as usual a nice video from your side and covering all points. One question from my side. Is the seat really split seat or a single seat split till the bottom layer?
thanks Suresh, it is physical 2 separate seats, just held together but a small screw clamp. But it is two separate seats.
@@Motoccino Thank you
@@Motoccino now a days I have seen two split seats in honda? Why is that any reason? I had a single seat my honda bike. Please let you know bro?
Sir. Handlebar grip link.. plz
www.bikenbiker.com/products/handlebar-grips-grab-on
@@Motoccino Thank You so much Sir.❤️
3500rs for the barend weights? OMG
Do you need handlebar grip for city ride? I never felt the need or is there any advantage?
You don’t need it. It just increases the comfort even more. I definitely feel a difference.
@@Motoccino I felt my right hand fingers very painful while driving from coimbatore to Salem. Is that any reason for handle grip??
@@praburathinam7731 you might want to install a handle bar riser from Carbon racing, it definitely helps loosen the grip and hands.