At the start of this procedure, everything goes according to plan. But after the first reboot, the process stopped with the error: 700220 "NC data read/write fault" Has anyone encountered this?
hello, please, can you help me, i have a problem with the RAZ of the AP on NCU-BOX 13A. i have tried the methode 2 to 3 to 2, but i have always the red led PS. have you any solution for init the AP. thanks.
Hello, i did same this but when ı reload the backup and start the hidrolic system ı see a fault. Fault is : 27090 and 27091 Error in data cross check NCK PlC . Can you help me please
@@cncservice1532 thanks again, now all works fine. Where I can read about changing absolute encoder axis position? I have 5axis 820D running on DOS but i feel it is same on 840d and many others. Also a have master X axis and slave X axis on machine gantry. I need change both encoder position of axis?
I am getting an error \_NC_ACT\CFG_RESET.INI: COMMUNICATION ERROR (#200#) NC Reset is not possible Can you help me why am i getting this error? I replaced the PCU with a spare after this I am getting the error. I have checked the profibus connection and it is okay.
thanke you for education. us the machinists should help eachothers.
When i reload. How if error list is incorrect archive version archive : 67:09:03, control : 51.28.00? Thanks for ur answer
At the start of this procedure, everything goes according to plan. But after the first reboot, the process stopped with the error: 700220 "NC data read/write fault"
Has anyone encountered this?
Just swapped batteries tonight and now have a 2001 plc working and shop mill not loading. Will this help the fault?
If you have 100% working backup, yes
That S4 position changing can you give it clear
Hello, just use steps from video
Как с Вами можно связаться?
hello,
please, can you help me, i have a problem with the RAZ of the AP on NCU-BOX 13A.
i have tried the methode 2 to 3 to 2, but i have always the red led PS.
have you any solution for init the AP.
thanks.
Send me email with video
I am not clear brother . Please write a text format
Hello, i did same this but when ı reload the backup and start the hidrolic system ı see a fault. Fault is : 27090 and 27091 Error in data cross check NCK PlC . Can you help me please
Do you have 100% ok backup? Ar you sure 100%? Try with another backup if you have or ask manf for working backup.
please witch access level is required for backup restore ?
Everybody Knows
hi do you have durma TP6 C backup file?
Sorry, no
I had the same issue, we have followed the same but it is giving authorization error when downloading NC & PLC. what is password you entered?
SUNRISE
@@cncservice1532 Thanks mate.
Hi! You set s4 to 3 or 4position? Thanks!
S4 to 4, wait to red led PS stop blink...
@@cncservice1532 thanks again, now all works fine. Where I can read about changing absolute encoder axis position? I have 5axis 820D running on DOS but i feel it is same on 840d and many others. Also a have master X axis and slave X axis on machine gantry. I need change both encoder position of axis?
@@pointerservice7119 if you have problem with reference point check MD34090
Error when read archive communication error (#200#)
Look at siemens support forum
Hello...i want to know some programming knowledge about this siemens controller...can you help me...?
Eh, siemens is hard.... start with manuals from net.... hard work
@@cncservice1532 i have knowledge of siemens 828D controller....but i want to know about this controller that you showed in your video...
I am getting an error
\_NC_ACT\CFG_RESET.INI: COMMUNICATION ERROR (#200#)
NC Reset is not possible
Can you help me why am i getting this error? I replaced the PCU with a spare after this I am getting the error. I have checked the profibus connection and it is okay.
Check backup if is ok, follow procedure from video
@@cncservice1532 i did follow the video but it is giving same error.
Did you have two green led after reset with dip switch? Did you try first upload nc or plc backup? Did you have 100% ok backup?
Please share me a video to transfer program to machine to pc in 840D
Ok
thanks you.
what is the password?
S.....E
Sunrise
What is the password please
SUNRISE
vertical video 🤬🤬🤬🤬🤬
Yes, ok! Grrr