It worked up until I had to turn off the machine, when I turned it on again there was an error saying "device not ready, push any key". I followed every instruction to the letter. What went wrong?
some models/usb will work for channel 17 only for text file ... but not sure will work after rebooting for binary files (SRAM and user data..etc) ..... best is to use channel 4 and CF (compact flash ) card.. that will work for sure every time .. joseph
Ok , thanks for uploadin video such as this one. I have a question... the problem is that operator couldnt power up a machine so he press reset and delete buttons while powering up a machine. It errased all memory data , parameters , macros .... everything. The only backup i have is the one that came with a machine from manufacturer. It contains a sram ,nc option , nc parameter , pitch, pc parameter , and system list ... some of those are txt files and some are 000 or 001 ext. Whn i transfer all those files to memory card and i run restore backup in boot menu it ony restore sram_bak.001 cannot find oprm_inf file and also restores pmc1.000 ... when i turn control on it removes all erors that i had but i can not reach to parameters any more. When i press system -> softkey for parameter does not exist. Does anyone have any idea. I think backup i have does not contain all data or im doing something wrong
Виктор Сугак thanks for you reply . It only tells me that SRAM file i have does not contain all data. Cause when i load it there is no softkey with parameters
@@markoosmanovic4686 The SRAM file contains all the data. Just the Options button is closed there. I know where the SYSTEM button closes; this is parameter 3208 # 0. You can enter the limited parameters through the OFF / SET button -> SETTING -> PAGE DOWN
Simply the best video about it! thank you so much!
Great info, now, how do I restore all these backup files to a new Main CPU?
great video!!! thank you!!
Hi, wondering if you have any tutotrial/Video on PMM (Slave amplifier) back up for Fanuc controller. Thanks
Thank you very much for this helpful video
SO GREAT , THANK YOU , SO MUCH ,
I also get "Change to edit mode" when pressing "F output" although I am in EDIT mode. Does anybody know how to solve this?
Thank you thank you very much....
When I Press the power off buttom in Cnc guide my program closed. How can I change that so i can do an all data backup.
It worked up until I had to turn off the machine, when I turned it on again there was an error saying "device not ready, push any key". I followed every instruction to the letter. What went wrong?
some models/usb will work for channel 17 only for text file ... but not sure will work after rebooting for binary files (SRAM and user data..etc) ..... best is to use channel 4 and CF (compact flash ) card.. that will work for sure every time .. joseph
hello for what series does this procedure work
waiting for the automatic backup procedure video :)
If they miss me parameter 313?
Thank you very much
Ok , thanks for uploadin video such as this one. I have a question... the problem is that operator couldnt power up a machine so he press reset and delete buttons while powering up a machine. It errased all memory data , parameters , macros .... everything. The only backup i have is the one that came with a machine from manufacturer. It contains a sram ,nc option , nc parameter , pitch, pc parameter , and system list ... some of those are txt files and some are 000 or 001 ext. Whn i transfer all those files to memory card and i run restore backup in boot menu it ony restore sram_bak.001 cannot find oprm_inf file and also restores pmc1.000 ... when i turn control on it removes all erors that i had but i can not reach to parameters any more. When i press system -> softkey for parameter does not exist. Does anyone have any idea. I think backup i have does not contain all data or im doing something wrong
RESET + DELETE erases only SRAM. Download only SRAM. In no case do not touch the OPRM.INF file otherwise you will lose your license.
Виктор Сугак thanks for you reply . It only tells me that SRAM file i have does not contain all data. Cause when i load it there is no softkey with parameters
@@markoosmanovic4686 The SRAM file contains all the data. Just the Options button is closed there. I know where the SYSTEM button closes; this is parameter 3208 # 0. You can enter the limited parameters through the OFF / SET button -> SETTING -> PAGE DOWN
Виктор Сугак thanks ill try that
how can i back flash rom backup
Any technician in indian delhi ncr for restore cnc parameters
Can you inform me for which series is this procedure? thanks
Hello, I will try to find an answer for you.
@@FANUCAmericaCorporation he is still looking, maybe covid affected his brain, its 8 months now. WTF
@@FANUCAmericaCorporation have you found ?
K tqu sir,, but how to load ?
too busy , no time.