Nice video, we've had our ester Williams slat aluminum wall for 33 yrs. Just had to replace 14 slats, bottom protective pad, a foam wall pad, skimmer and beaded liner. It's our 3rd liner, but if you do it yourself, you'll save thousands. Best of luck with your new pool !!!
Thank you for sharing, looks amazing. I'm hoping to install a semi inground pool and build a deck around it later. If I can buy the pool and get it installed within my budget of $5500 it's going down. 😊 I'm in the Midwest area, looks like I need installers. Don't think I can dig that hole and assemble. Enjoy!
Will awesome video really helped me in deciding which pool to get. im going with the hampton 10x30. My only question did you purchase installation from Pool Factory or was it local?
Hi! I would like to know how many boxes the whole pool comes in, including the filter and the pump. I'm buying the same pool to ship it to Dominican Republic. If you can provide that information, I will highly appreciate it. thank you
That size pool...Abt 10k plus, Abt 1500 plus to assemble, pump n filter Abt 400 to 800 plus, 500 for 1st season salt chemicals n setup...I'd say Abt 14 to 15k when their done..give or take when their done...not including any decking or fence...better off doing the deck n fence ya self to save a lil money
1500 to assemble?! Lol I hope to god your not including excavating, base prep, haulage, backfilling, water delivery, pump and filter system, we just did one for 20k pool cost 8k, oval above ground pools are a diffrent monster to a round above ground especially semi-inground like this one @redblue40rc33
Also these installers should have not installed the skimmer or jet until the pool was halfway full with water this is asking for linner failure with only that much water
Could have fixed there match up issue for the wall bolt holes without removing the wall off the track by bumping the bottom plates in or out depending if the wall is Overlap or short on distance, built on disturbed virgin ground, no bottom plate supports... hope it doesn't settle on you
That looks great! I have a question, did you just backfill with the dirt you excavated for the hole? If so, I might try that. We have a Doughboy 1/2 sunk in, but we had to build a retaining wall because they said the other alternative was filling the gap with a cement slurry which would cost a lot. But there's an ugly gap between the retainer wall & pool, so if just backfilling it with dirt is an option I might do that.
Hi, we purchased the pool ladder for the inside of the pool from the pool factory it was the confer curve for $379 and we are doing a custom composite decking steps after the pavers are done. Hope that helps.
Hey man, did you have to get a permit for this? I am planning on doing the same thing, but I'm over in clearwater, so just curious if you had to or not.
Looks awesome. We are planning on purchasing the same pool from the pool factory. Did you upgrade the liner 25 or 30 mil? Overlap or Uni-bead liner ? And would you mind posting what equipment you went with. Thank you
We decided to go with the overlap Bahama blue liner 25 gauge. The equipment we went with the aqua pro 190 sf cartridge filter system 2 hp two speed pump.
I am so glad I found this video, this looks great and the exact size pool I am hoping for. I live in Zephyrhills so you are not far from me. Who is the company you paid to erect the pool? I have been looking and turned down that they don't do above pools ..can u tell me please?
I’m looking at installing one of these pools. If you don’t mind me asking, how much did installation run you? Just trying to get an idea of how much the all-in cost will be
The total installed cost was about $1500 plus I had to get somebody to remove the dirt. If I would of just done it above the ground it would of been $800
@@WillGAdventures Thanks so much for that information! I’m just a little bit further north of you in FL so our costs should be somewhat similar. I think installing below grade is the way to go. Much more rigid that way. Anything else to note about your installation, the pool itself and how it’s held up so far?
Thanks for watching I appreciate it. So far everything has been great no issues so far. My update video should be coming out soon just haven’t had time to put it all together. Let me know if you have any other questions.
Hey I appreciate you watching the video. If you scan through the comments I can’t remember when but I put the company’s info. Let me know if you have any other questions. Good luck!
Will, pienso poner esa misma piscina en casa pero no se si me puedes dar el numero de tel de el contractor que te instalo la piscina. Quedaste contento con la instalacion?
Do it dude. I promise it’s the best investment we ever made. Kids love it. They are in it all day everyday they get so upset when we shock it. I wish we would of done it years ago. Thanks for watching
did you have to pull a permit or anything and was there any issues if so with burying the pool? and also is it that deep or are those installer just short lol
Friend of ours had a rectangle pool put in back yard..like 16x30 or something...6 inches out of level, guy didnt excavate grass from pool site, just assembled on grass ......yeah shes REALLY happy abt it cause her HUSBAND knew this POOL GUY....now they gotta break it down and redo the pool...sad
These guys really didn't form a wall cove... Also, it doesn't look like they did a good job tampering the ground either.Strange that they used a roller over the liner.... With this method It only takes one rock and boom you have a hole on the bottom of the pool. Looks great tho! Enjoy.
Thank you for the feedback! I appreciate it. They used a foam cove that we bought at the pool factory vs making one from sand like they where going to do. I recommended that we put the foam for better liner protection.
❤❤❤🎉🎉😮😂🎉🎉🎉🎉❤❤ ARVID och jonna och jonna och det var ju bara att du ska göra en ny tid 20:00 jag är på jobbet så det 😂jag är på Såpöllppqpqåqqqqqq0 jag Såpöllppqpqåqqqqqq0 jag har varit med och 😮det var 😮det var ju bara så du är ARVID och det 😂❤och det 🕛 att
Thanks for sharing your pool build. Was fun to watch. Hope you and the family enjoy it for years to come.
Thanks so much! I appreciate it. We’ve been having a blast
@@WillGAdventures Awesome video! Fabiosa Media is interested in licensing some of your videos. How can we get in touch with you?
Send me a email
Machogarcia214@gmail.com
Nice video, we've had our ester Williams slat aluminum wall for 33 yrs. Just had to replace 14 slats, bottom protective pad, a foam wall pad, skimmer and beaded liner. It's our 3rd liner, but if you do it yourself, you'll save thousands. Best of luck with your new pool !!!
Thank you for sharing, looks amazing. I'm hoping to install a semi inground pool and build a deck around it later. If I can buy the pool and get it installed within my budget of $5500 it's going down. 😊 I'm in the Midwest area, looks like I need installers. Don't think I can dig that hole and assemble. Enjoy!
The joy to see the kid having fun is priceless, I Did installed my own and it came out perfect, good luck enjoy the hot tampa summer
That's freaking awesome, I'm getting mine in April ❤❤❤❤❤
This video was great......Amazing.... I'm looking into getting the 12'x24' pool.
Go for it! We love our new pool. ThaNks for watching 🤙🏽
awesome video thanks for sharing
Thanks for the visit
Congratulations!!!
Thank you!!
your neighbors are awesome!
Will awesome video really helped me in deciding which pool to get. im going with the hampton 10x30. My only question did you purchase installation from Pool Factory or was it local?
That’s for the comment. It was a local company
Hi how did you find someone to install it ? We bought our kit last fall and are ready to build it out but i think i want to hire someone thanks
Wish my neighbors where that neighborly
Hi! I would like to know how many boxes the whole pool comes in, including the filter and the pump. I'm buying the same pool to ship it to Dominican Republic. If you can provide that information, I will highly appreciate it. thank you
Hi, so the pool came on a pallet in about five different boxes.
hello.. between the pool and the sand (on the side) did you put a protective membrane or is it in direct contact with the sand?
No I didn’t unfortunately nobody mentioned putting it
@@WillGAdventures and is the plate still good?
Yes all fine
Yes all fine
Amigo, tiveste algum problema com o aço que está abaixo do chão?
Nice pool
Thanks
Thanks 😊
How deep is it?
54 inches
Is this pool the saltwater 8000? I bought one and having it installed as soon as the permit gets approved. 6 weeks now in vero beach florida.
Yes it is! Enjoy you will love it
Show us the finished project!!!
Coming soon life has got really busy for us over here. Thanks for watching!
What was the name of the company that set it up and how much did they charge?
That size pool...Abt 10k plus, Abt 1500 plus to assemble, pump n filter Abt 400 to 800 plus, 500 for 1st season salt chemicals n setup...I'd say Abt 14 to 15k when their done..give or take when their done...not including any decking or fence...better off doing the deck n fence ya self to save a lil money
1500 to assemble?! Lol I hope to god your not including excavating, base prep, haulage, backfilling, water delivery, pump and filter system, we just did one for 20k pool cost 8k, oval above ground pools are a diffrent monster to a round above ground especially semi-inground like this one @redblue40rc33
Also these installers should have not installed the skimmer or jet until the pool was halfway full with water this is asking for linner failure with only that much water
Could have fixed there match up issue for the wall bolt holes without removing the wall off the track by bumping the bottom plates in or out depending if the wall is Overlap or short on distance, built on disturbed virgin ground, no bottom plate supports... hope it doesn't settle on you
That looks great! I have a question, did you just backfill with the dirt you excavated for the hole? If so, I might try that. We have a Doughboy 1/2 sunk in, but we had to build a retaining wall because they said the other alternative was filling the gap with a cement slurry which would cost a lot. But there's an ugly gap between the retainer wall & pool, so if just backfilling it with dirt is an option I might do that.
Yes we did use the same dirt and everything turned out fine! Thanks for watching
Mamá ❤
what stairs did you get? we are just putting our 16x32 oval Pool Factory pool up now but I did not get the stairs yet.
Hi, we purchased the pool ladder for the inside of the pool from the pool factory it was the confer curve for $379 and we are doing a custom composite decking steps after the pavers are done. Hope that helps.
What it's ur total investment ?
Right around $15K
I’ll explain more in next video thanks for watching.
Thats really a 15x30😮? i just got one and im trying to see how big it really is
Yes it is
Hey man, did you have to get a permit for this? I am planning on doing the same thing, but I'm over in clearwater, so just curious if you had to or not.
I didn’t. I probably should have but what ever. Lol
@@WillGAdventures Hahaha, heard that. Who ended up removing the dirt for you?
Which pump filter did you get and where did you get it? Thanks for the upload.
Hey, I got the aqua pro 2 hp cartridge, variable speed from Pool factory. Thanks for watching.
Looks great. If you put some steel behind light (on outside) would that be good enough?
Not a bad idea. Unfortunately I already found a alternative and it works great. Thank you for watching 🤙🏽
Looks awesome. We are planning on purchasing the same pool from the pool factory. Did you upgrade the liner 25 or 30 mil? Overlap or Uni-bead liner ? And would you mind posting what equipment you went with. Thank you
We decided to go with the overlap Bahama blue liner 25 gauge. The equipment we went with the aqua pro 190 sf cartridge filter system 2 hp two speed pump.
Thank you.
No problem thanks for watching
@WillGVlogs how do you like the cartridge system?
I’m in Tampa too! How much did you pay for installation?
$1500 I had to get rid of the dirt.
That's great. I just got a quote for $1800 installation, $350 material and $200 digging for a 12x24x52. Not sure if this is a great price. Wyt?
I am so glad I found this video, this looks great and the exact size pool I am hoping for. I live in Zephyrhills so you are not far from me. Who is the company you paid to erect the pool? I have been looking and turned down that they don't do above pools ..can u tell me please?
Full metal shovel. I purchased the pool from the pool factory
Thank you will as I too am looking at the pool factory and this pool size exact but I need help erecting it..I appreciate the info
Absolutely no worries. Let me know if you have any questions.
Hi what’s the name of the company you hire to build the pool ? I just purchase the same pool and I can’t find anybody to build it 😢
Full metal shovel is the name of the company ask for Jeff tell him that Will sent you.
@@WillGAdventures thank u I will
@@WillGAdventures thank you Will , I did call them I left them a voice mail,
Hi Will , Ithey never call me back , I try to recall but it goes straight to voicemail 🥲,maybe the went out bussines
@@chefcapuano +1 (813) 782-1429 call that number
I’m looking at installing one of these pools. If you don’t mind me asking, how much did installation run you? Just trying to get an idea of how much the all-in cost will be
The total installed cost was about $1500 plus I had to get somebody to remove the dirt. If I would of just done it above the ground it would of been $800
@@WillGAdventures Thanks so much for that information! I’m just a little bit further north of you in FL so our costs should be somewhat similar. I think installing below grade is the way to go. Much more rigid that way. Anything else to note about your installation, the pool itself and how it’s held up so far?
Thanks for watching I appreciate it. So far everything has been great no issues so far. My update video should be coming out soon just haven’t had time to put it all together. Let me know if you have any other questions.
Brother Im in the same project! But I live in Orlando, do you mind sharing the installers info??
Hey I appreciate you watching the video. If you scan through the comments I can’t remember when but I put the company’s info. Let me know if you have any other questions. Good luck!
how is ur pool from the pool factory ? we’re ordering one now .
It’s been great 😊
What was the total cost with install?
$7500 give or take just Pool, Pump, stairs and install
Will, pienso poner esa misma piscina en casa pero no se si me puedes dar el numero de tel de el contractor que te instalo la piscina. Quedaste contento con la instalacion?
Great pool, but can I ask which pool from the pool factory did you get? (Model) Thanks!
15x30x54 saltwater8000
@@WillGAdventures thanks we are looking at the aurora, almost the same pool!
Do it dude. I promise it’s the best investment we ever made. Kids love it. They are in it all day everyday they get so upset when we shock it. I wish we would of done it years ago. Thanks for watching
Did you plan on it being semi in ground or did that just happen to happen after them digging up the pipes?
That was always the plan. We knew that the old drain field was there but didn’t know it was that much.
Who and where did you find your installers we are looking for a crew to install our above/ in ground pool
Hey thanks for watching. Its a local company here in central Fl I’ll get the company name and get back to you.
@@WillGAdventures thank you sounds great
Full metal shovel is the name of the company ask for Jeff!
They are also one of very few licensed and insured above ground Pool installers
how much did cost to you everything?
Pool and labor a little over $7000
did you have to pull a permit or anything and was there any issues if so with burying the pool? and also is it that deep or are those installer just short lol
How much was the installation?
$1500
@@WillGAdventures sweet thanks!
Friend of ours had a rectangle pool put in back yard..like 16x30 or something...6 inches out of level, guy didnt excavate grass from pool site, just assembled on grass ......yeah shes REALLY happy abt it cause her HUSBAND knew this POOL GUY....now they gotta break it down and redo the pool...sad
I like it
Thank you 😊
What happened @19:46?
Really not sure to be honest. Haven’t had any issue in that area which is good lol
These guys really didn't form a wall cove... Also, it doesn't look like they did a good job tampering the ground either.Strange that they used a roller over the liner.... With this method It only takes one rock and boom you have a hole on the bottom of the pool. Looks great tho! Enjoy.
Thank you for the feedback! I appreciate it. They used a foam cove that we bought at the pool factory vs making one from sand like they where going to do. I recommended that we put the foam for better liner protection.
Page friend love Brianna Jones 🥰🤟 good can see yes swim
house 🏠 sleep bed night
❤❤❤🎉🎉😮😂🎉🎉🎉🎉❤❤
ARVID och jonna och jonna och det var ju bara att du ska göra en ny tid 20:00 jag är på jobbet så det 😂jag är på
Såpöllppqpqåqqqqqq0 jag
Såpöllppqpqåqqqqqq0 jag har varit med och 😮det var 😮det var ju bara så du är
ARVID och det 😂❤och det 🕛 att