ASMR Lawnmower Restoration - Spares or Repairs HONDA IZY

I wanted to try something different this time. 'ASMR stands for autonomous sensory meridian response; a term used to describe a tingling, static-like, or goosebumps sensation in response to specific triggering audio or visual stimuli.'
This Honda Izy was bought as a non runner, spares or repairs. It required more work than I first envisaged due to a very corroded deck. This video shows the full restoration from stripping down the mower, repairing the deck, new paint, servicing the carb & engine, rebuilding and finally testing it out.
If you found value in this content, remember to give it a "thumbs up" and consider subscribing.
I wish you all a Merry Christmas and a Happy New Year, and thank you to everyone who has supported my channel this year! Hope to see you all in January 2023!
Product links:
Honda Sticker: amzn.to/3WkFWtf
Filter/ spark plug service kit: amzn.to/3joOmB8
Hammerite smooth silver: amzn.to/3BWmAT9
Grinder wire wheels: amzn.to/3hND9cV
Grinder flap discs: amzn.to/3Vpod2q
Disclaimer: I accept no responsibility for damage or injury caused by following this video. Carry out this job at your own risk and always wear appropriate PPE.

[@jonathanlewis9495]

I’ve just watched this all the way through and really enjoyed it. I’ve got the same mower which starts every time . I fully cleaned it and painted the deck on mine with hammeright about 2 years ago but now the holes are starting to appear 😢. I think I’ll give it a full strip after watching this 👍👍👍

[@paulmonk7820]

A 2x against the blade tip works well when removing and installing a blade. 4:20

[@paulmonk7820]

FYI: those rubber gloves go on super easy if you first rub baby powder on your hands. 😮😊 0:06

[@textheman8315]

Excellent job I was just about to look for a new deck for mine but after watching your video I will restore the deck myself with the help of a mate who has a mig welder.

[@paulmonk7820]

Wonder if it would be easier to shape the metal patches to the top of the deck, then place them underneath. 😮 10:59

[@ratsausage]

My Izzy has just bent its crank after it hit a phone line cover set into the lawn. New crank and all the bits to change it plus the time needed means I'll fling this one in the dump and buy a whole new machine.

[@TurnersWorkshop97]

Ahh that’s a shame mate. If the decks in good condition you could just buy a replacement second hand engine. They’re usually quite easy to come by as the engines typically outlast the decks 👍🏼

[@paulmonk7820]

Surprised you didn't clean the rust off the axles and lube them. 😮 23:20

[@garyclifton2180]

Nice one young man nice to see on before Christmas.hope you and family have a wonderful time

[@TurnersWorkshop97]

Thank you 🙏 😊 you too mate hope you and your family are having a nice time 🎅♥️ best wishes

[@zubeystinzen540]

Well saved & restored mate,👍 merry Christmas ❤️

[@TurnersWorkshop97]

Cheers mate, merry Christmas 🎅 🎄

[@SilverbackG-wq1cn]

Fantastic restoration! Top man

[@TurnersWorkshop97]

Thank you! 😊

[@BrianRead-dy9sx]

How long did this restoration take, & how much did it cost ..?

[@TurnersWorkshop97]

Im not sure exactly as the recording always takes a long time. But cost around £30-40 for paint and materials.

[@jimkoz5052]

Very nice job. Looks great. Take Care

[@TurnersWorkshop97]

Thanks mate, take care 🙏😁

[@stevebullock9417]

What was the product you used to convert the rust please.

[@TurnersWorkshop97]

It’s called Vactan :)

[@jakehaddaway2266]

Great video 👍

[@TurnersWorkshop97]

Cheers man 😁

[@andrewjohn7952]

Great job

[@TurnersWorkshop97]

Thanks mate 👍🏼😊

[@KevinMcMillan]

Perfect!!!

[@TurnersWorkshop97]

Thanks mate! 😊

[@wayne1243]

Top job 👊👊

[@TurnersWorkshop97]

Cheers Wayne 👍🏼👊🏼👊🏼

[@Andrewsteelestilldancingrighto]

Centre bar going through honda izzy engine snapped at top below nut.can it be replaced.

[@TurnersWorkshop97]

If it’s the crankshaft broken it will be quite a lot of labour to repair it. Might be easier to get a second hand engine as there are many around. The decks rot way before the engines fail usually so you should be able to pick an engine up relatively cheap 😊

[@leesarson7219]

Whats the white stuff you put on before you welded it ?

[@TurnersWorkshop97]

Vactan rust converter

[@ronniebarker79]

Cracking job buddy what is that paint for the exhaust m8

[@TurnersWorkshop97]

Thanks mate, I think it was Simoniz vht black paint

[@ronniebarker79]

@@TurnersWorkshop97 cheers buddy

[@ronniebarker79]

How did the france trip go buddy

[@TurnersWorkshop97]

Was brilliant thanks mate, we had a fantastic time. Would definitely recommend a visit to lake annecy. Made a video of it if you’re interested of the places we visited

[@ronniebarker79]

@@TurnersWorkshop97 i bet that van was running on 2 wheels with all that duty free lol 😂 merry xmas buddy

[@GeoffreyEd]

Lopez Ruth Lee Kevin Harris Margaret

[@cristianrosolen1572]

Benfattto

[@TurnersWorkshop97]

Thank you! 😊