Hi there. It sounds like those remotes are not of our manufacture, but are in fact competitor remotes. Our tech support team might still be able to assist you, though. You are welcome to give them a call on +27 11 699 2400.
Starting with the gate in the closed position, you need to press and hold the remote control button that opens the gate. The gate will start to open and keep going until it reaches the Pedestrian Open position and then stop. Then release the button and the gate will then continue opening to the fully open position. AutoClose will be overridden.
This is a good video, but the newer models don't work this way in terms of adding remotes. You have to go through the rigmarole of doing this on the control panel.
Hi Rebecca. Thanks for your comments. Your feedback is appreciated. As a matter of interest we changed the way we do this for a newer controllers due to the feedback we received from our customers. However your comment is noted. I think you will be really interested to see what we do next in terms of remote control learning - we have some exciting stuff soon to be released.
It's the receiver that holds the memory not the transmitter. The process of erasing the receiver's memory depends on the model type of receiver you have. It'd be much easier for you to discuss this with our Technical Support call centre on 011 699 2481.
I have a centurion d5, what happened is that while I was adding/learning another transmitter my son pressed the button on the other remote which we use for alarm, so now when you arm the house, the gate also opens. But the other button is not working anymore on that remote. Am using ET transmitters.
Please assist me, how to add new remote, when I don't have master
Thank you, i just programmed my new remote
Thanks very much it helped
Had one remote stolen. Is there any way to cancel?
Can we program a car garage door opener to work with Centurion gates via this method?
Is it possible to reprogramm remotes with this method?
hey, so basically I'll need the ''master'' remote to program additional remotes?
I am still lost, who should I call or steps should I follow?
When I press remote button after adding remote it does not beep, so the receiver does not accept my remote
How do I add remote on D3 without the master remote
Did you manage to get the answer coz I'm also seeking that answer
I'm on this boat. I reckon we will have to replace the whole motor
my D5 was supplied with 2 remote control units branded "Octo" dts. how I program them?
Hi there. It sounds like those remotes are not of our manufacture, but are in fact competitor remotes. Our tech support team might still be able to assist you, though. You are welcome to give them a call on +27 11 699 2400.
My transmitter doesn't have a jumper. Is there another way around it because both my remotes are not working
Themba Bila I also have the same problem
Please advise how I override the auto lose features?
Starting with the gate in the closed position, you need to press and hold the remote control button that opens the gate. The gate will start to open and keep going until it reaches the Pedestrian Open position and then stop. Then release the button and the gate will then continue opening to the fully open position. AutoClose will be overridden.
hi, how can i change a remote code , they stole our house keys and the remotecodes need to be changed
Shaun Bierman call the tech support team on 0116992481. They'll talk you through the steps.
How can I see which remote opened or closed the gate last?
This is a good video, but the newer models don't work this way in terms of adding remotes. You have to go through the rigmarole of doing this on the control panel.
Hi Rebecca. Thanks for your comments. Your feedback is appreciated. As a matter of interest we changed the way we do this for a newer controllers due to the feedback we received from our customers. However your comment is noted. I think you will be really interested to see what we do next in terms of remote control learning - we have some exciting stuff soon to be released.
Centurion gate limit setings
how do I erase the memory of a transmitter?
It's the receiver that holds the memory not the transmitter. The process of erasing the receiver's memory depends on the model type of receiver you have. It'd be much easier for you to discuss this with our Technical Support call centre on 011 699 2481.
I have a centurion d5, what happened is that while I was adding/learning another transmitter my son pressed the button on the other remote which we use for alarm, so now when you arm the house, the gate also opens. But the other button is not working anymore on that remote. Am using ET transmitters.
necesito en español
This is not working 😩!!!
Me too, just doesnt work
So poorly explained, so many questions unanswered !
I agree
I couldnt do it , i even wrote it down without all the chat between the instructions, still woudnt work