@@allan9584able These bushings have the number 5 on them, nothing else. I've ordered these twice from different sellers and both times they had a 5 on them. If you google 9040H wheel bushings or 9040H bushings kit, you'll be able to find not only the bushing, but all the washers, clips and dust caps as well
A 6" long, 1/2" ~15mm hex bolt down into the wheel and a hammer was pretty easy to knock out the bushings. Sometimes it helps to knock on one side of the bushing, them go to the direct opposite side, which wiggles it out. Sometimes, one side wack and one would pop out. Use a very large socket to gently tap in the bearings, and only tap on the most outter bearing ring.
There is bevel edge flat on a side of the husqvarna bearing. On my ride on there is no corresponding keyway inside the wheel. However my wheels have grease nipples and I'm guessing that the recessed flat spot in the bush is to accomodate the inside part of the grease nipple.
I found in another vid that indeed the flat spot recess on the bushing is to accomodate the grease nipple. So the bushing has to be placed corectly if there is grease nipple.
what is the number on the bearing
532-1249-59
the actual number on the bearing thats just a made up number for seller @@MelvinZoopers
@@allan9584ableThat is the number from the owner's manual.
@MelvinZoopers yes I got that but a bearing shop it means nothing ,there should be a manufacture number on bearing international number
@@allan9584able These bushings have the number 5 on them, nothing else. I've ordered these twice from different sellers and both times they had a 5 on them. If you google 9040H wheel bushings or 9040H bushings kit, you'll be able to find not only the bushing, but all the washers, clips and dust caps as well
A 6" long, 1/2" ~15mm hex bolt down into the wheel and a hammer was pretty easy to knock out the bushings. Sometimes it helps to knock on one side of the bushing, them go to the direct opposite side, which wiggles it out. Sometimes, one side wack and one would pop out. Use a very large socket to gently tap in the bearings, and only tap on the most outter bearing ring.
A very well done educational video.
Dziękuję za instrukcję.
Excellent video, very clear instructions. Could you please share a site to order these bearings from?
Thanks. I would just go to Ebay & punch in your make & model # & the ones you need should come up. That's where I got mine.
excellent video
There is bevel edge flat on a side of the husqvarna bearing.
On my ride on there is no corresponding keyway inside the wheel. However my wheels have grease nipples and I'm guessing that the recessed flat spot in the bush is to accomodate the inside part of the grease nipple.
I found in another vid that indeed the flat spot recess on the bushing is to accomodate the grease nipple. So the bushing has to be placed corectly if there is grease nipple.
Very true, yes.