What is DyAc™ 2 Technology?
Вставка
- Опубліковано 4 жов 2024
- DyAc™ is an exclusive technology designed by ZOWIE to reduce motion blur seen in LCD technology. It reduces ghosting in fast game scenes, minimizes screen shaking in rapid firing, and tracks speedy enemies better.
With the release of the XL-X series, DyAc™/ DyAc⁺™ has been upgraded to DyAc™ 2 with dual backlight control technology, which enhances blur reduction & reduces crosstalk over the entire screen while providing a soft light output to facilitate eye adaptation.
Learn more about DyAc™/ DyAc⁺™/ DyAc™ 2:
zowie.benq.com... - Ігри
make 1440p monitors
they make esports dumbass 1080p is standard there cuz its easy to run and u dont need a 4090 if u want a 1440p monitor go to asus
Thanks for your support!
Bruh, they will milk 1080p till we die brother
2k ok but keep it 24 Inch for gamers
@@vikhsn :)
I have a feeling that this video misses the mark on the true benefit of dyac2.
TLDR:
Motion clarity is now consistent across the entire panel. There is also potential for a small improvement in latency over ulmb2.
The most crucial change in ulmb2 is that the overdrive is varied from the top to the bottom of the screen. This is results in better clarity because pixels in an lcd panel are updated from top to bottom. This means that although a pixel at the top of the screen may have already received an update, it must wait for the rest of the pixels below it before the strobe occurs. This waiting period means that a pixel at the top always has more time to "settle" than a pixel at the bottom of the screen and therefore needs to receive less overdrive than a pixel at the bottom. On monitor with without ulmb2, only about one third of the pixels receives the correct amount of overdrive which results in double imaging and/or ghosting in the other two thirds. An additional affect of this waiting period is that the pixels at the top of the screen have more latency than the pixels at the bottom. You can experience a similar effect when playing at high fps on low refresh rates with vsync off. The pixels at the top of the screen appear to lag behind the bottom. Although this is not addressed with ulmb2, the effect is minimal at high refresh rates and is easy to ignore.
I might be wrong here, but the crucial change for Dyac2 monitors seem to be the ability to strobe different sections of the backlight at different times. This would completely circumvent the double imaging and ghosting since you can just strobe batches of pixels as soon as they're ready. This could be better than ulmb2 because there is no need for extreme overdrive on the pixels at the bottom of the screen, and because there is less latency for the top pixels since the extra waiting period is more or less eliminated.
I think these demo videos need to include pursuit camera tests since that's when bfi technology truly shines.
So DYAC 2 is basically DYAC with automatic Large Vertical Totals AKA QFT?
Biggest letdown with BenQ is the lack of 60HZ support for Dyac 2, so that means those of us who play Fighting Game esports like Street Fighter 6 etc has to stick to the Viewsonic XG2431 which is the only Blurbuster 2.0 certified monitor.
Huge letdown by Viewsonic the fact that they dropped the ball on this at supporting 60hz.
Actually the DyAc is still functioning when it is at 60hz, but we don't suggest due to the performance is not suggested :)
@@kinghadu9611 actually, it is supported as said, just not recommended.
@@ZOWIEeSports ok I just read the review on rtings again, the 60HZ mode with Dyac isn't recommended because it doesn't actually work, the monitor still flickers at 100hz causing severe image duplication at 60hz meaning it's worthless and non functional.
@@ZOWIEeSportsthats like saying, i can run my ddr5 at 7600 mts, but its not stable
@@Keaweahe 👌
Zowie thanks for making a solid product, for years ive been repairing my old 200 hz crt lol, but you guys made it so i can actually have a modern 1080 p monitor.
Hello, what the diffrence between XL2546k and XL2546x?
Hi, the differences are explained by this vidoe, if there is any question, please feel free to elt me know, thanks.
ua-cam.com/video/p3U2tTi_atk/v-deo.html
Will Xl2546X have much better colors than XL2566K ?
Hi, regarding color performance, it will be similar between those two, thanks.
CRT or dyac 2 ? Which is better when you quickly move the camera left - right. In terms of blur. As for eye tracking, without having to stop the camera ?
DyAc is already better than CRT for the motion clarify, DyAc2 is further win :)
@@ZOWIEeSports Pal , that's not true . I have dyac " 1 " technology monitor , and its VERY NOT @ DyAc is already better than CRT for the motion clarify @ , as you said above. 144 hz , 27 inch , quad hd . And that's definitely not true . VERY definitely not true .
How can I trust you after this when I’m planning to buy a new monitor?
@@colorrifle417 hi, I did a side-by-side comparison before, and that is what I perceived that DyAc is better.
If you have concern, suggest you to experience it (if any of your friend has our DyAc2 monitor) before buying the monitor; and that can also save your effort to buy and return the monitor.
Hey does the XL2546X have the same "Vivid Color Film" as the XL2586X ?
Or is that a new feature thats exclusive the the 86X?
Hi, the vivid color film mis a feature on XL2586X.
For XL546X, it also has color improvement comparing to XL2546K. For your reference.
@ZOWIEeSports ok that's an awesome upgrade. Thank you for the reply 🔥
when we see a 27inch 1440p monitor?
Hi, sorry for we don't have information to share before any new products getting ready to share. Thanks for your support.
Next time no TN or IPS just bring an OLED with DyAc 3.0 Ultimate 🤣🤣👌👌
Hi, we design our product based on a overall experience consideration; so we are open to all technology based on that accordingly.
Zowie @ZOWIE e-Sports, may i ask you. Should i Buy XL2566k or is there comming this year a new XL2566X or something with DYAC2 monitor that has 360hz? are there any plans on updating 360hz to dyac2? because don't know if should i wait, or just grab xl2566k.
Hi, sorry for late reply.
And also sorry for i can't share the plan before we have a confirmed schedule to release :(
But if you needs a monitor soon, i would like to suggest you to choose XL2566X. If there is any question, please feel free to let me now, cheers.
@@ZOWIEeSportswhat ? Xl2566x is not released yet
They are sneaky
@@inxlee ？
@@ZOWIEeSports is it a hint that the xl2566x is coming out soon:D
is there a model with the same technology and 360hz?
Hi, for DyAc2 and also the new design: there is no 360hz model yet.
@@ZOWIEeSports okay thank you. I hope this will change in the future, I’ll wait until then.
Whats the difference between XL2566k and XL2546X other than the hz?
And dyac+ and dyac 2
@@snadder23
Hi, the main difference between those (K vs. X) two are:
1. X has DyAc2.
ua-cam.com/video/mcMb0sPoAmo/v-deo.html
2. X has a smoother and precise positioning height adjustment stand
3. new XL Setting to Share with Auto Game Mode feature.
You can check our page for the details of above items.
zowie.benq.com/en-us/monitor/xl2546x.html
if any question, please feel free to let us know, cheers.
Dyac를 키게 되면 인풋렉이 얼마나 발생합니까?
Hi, becuase functions independently on the monitor and doesn’t require syncing with a PC, it won’t consume any computing power that might affect your gameplay performance nor add input lag.
for competitve esports which one to choose xl2546x or the xl2566k please help ❤
hi, sorry for late reply.
i would like to suggest yo u may consider XL2566K as a long term investment as to leverage the computing power of your pc; or just get the monitor to be ready in advanced if your current pc is not capable of 360hz yet. Unless your pc and game is pretyyyy far from 360hz.
For 360Hz models, we recommended graphic card should choose at least:
NVIDIA GeForce RTX 30 series Graphics Card or better
AMD Radeon RX 6000 series or better
if any question, please feel free to let me know, cheers.
@@ZOWIEeSports yea i am going to build pc with r7 7800x3d and rx 7900xt so thatswhy its more than capable to provide me 600+fps in valo and cs2
so thatswhy i want to like if u will ever launch 360 dyac2 not asking when just will u ever
@@amanmaggon520
Hi, sorry for late reply, and also sorry for i also can't disclose the plan before it getting ready to release. Please kindly stay tune with our social media once it is ready to release :)
Hello, I have a question, so which one is "better" DyAc+ or DyAc2 in the video above in the Valorant example we can see that DyAc+ is better, but on the other hand in this video ua-cam.com/video/mcMb0sPoAmo/v-deo.html DyAc2 is better than DyAc+, I am confused please help :)
Sorry for late reply, DyAc2 is better than DyAc+.
I am not sure what video you meant that DyAc2 is better? (it shouldn't be), i would like to check it, thank you.
What the panel in XL2546X and 2586X?
SOrry for late reply, not sure what panel information you want to know of those two monitors?
@@ZOWIEeSports i mean model panel. for example 2546K use Q250HNT A200, A600
@@nolikeee
Got it; sorry for we don't disclose the details of our component; if you want to know if this is the same model name as other brands: they're not.
Do dyac 2 or dyac+ support ps5
Hi, it works; that feature is monitor independent feature, it functions by itself.
Will there be a XL2566X 360hz version?
Hi, sorry for I am not allowed to share the future product plan which is not confirmed to release, thanks for your support :)
I saw dyac 2 only 240 and 540 hz.
@@LeMontAgr DyAc (2) works for hz above 100hz, not limited to 240 or 540hz.
@@ZOWIEeSports idk
I just tell that i saw on official site that will be 2 new models with dyac2 and it were 240 and 540 hz models
~3 weeks ago
@@LeMontAgr Yes, currently DyAc2 is available on our new 240hz and 540hz models; for other new models, w ewill update once any of them gets ready to share, thanks.
31 January 2024 , any updates ?
Sorry for waiting, it what you asked about is XL2586X: supply chain will be closed for the Chinese New Year Holidays until mid Feb and we will update availability after operation is resumed
if i not setting the screen in 240 but i put the 144hz mode , does the Dyac tm 2 will still works ? or its diseable the dyac 2 when i switch The 240 Hz of the monitor to 144hz ?
Hi, it is still working when it is 144hz.
@ZOWIEeSports okay cool , and when its not working ? 30 hz or what ? precilsly ! :)
@@ezeeze1643
It won't working when it is under 60hz.
@@ZOWIEeSports ok very nice thanks for the info
@@ZOWIEeSports and ulmb 2 its working until what 60hz ?
does dyac+ work on ps5?
Yes, it is a monitor independent feature, it works on all input source and it is suggested to use it when it is >100hz/fps.
@@ZOWIEeSports is ama better on high or premium for better reaction time
@@ZOWIEeSports same with dyac is it better premium or high
@@mikesworld4812 Hi, due to each one has different perception to the DyAc feeling, so I would like to suggest you to try out Premium and High in playing couple matches as to feel which level of setting is better for you.
Best regards.
@@mikesworld4812 Hi, You can try both AMA as High and Premium as to feel which one to take; due to a higher overdrive setting, it may comes some artifects in some specific pattern, most of them like Premium for gaming, but some like high.
For me, i use Premium in game, and set High for other than game (website browsing, video, work...)
for your ference.
You released DyAc2 because ULMB2 beats DyAc+? :)
Hi, sorry for late reply.
No, actually we think DyAc+ is better than any other technologies; and why we proposed DyAc 2 is just about to keep our product to be better than what we are in yesterday :)
@@ZOWIEeSports My LG OLED monitor has no blur, ghosting, overshoot whatsoever :P
@@react1066 You may not aware what does motion blur mean, suggest you can try out our monitor as to feel the difference in the future :)
And by the way, this this is DyAc+ vs. other latest motion blur reduction technology:
ua-cam.com/video/KR9OKph18Ow/v-deo.html
FYR
@@react1066 This is a lie, OLED is sample and hold and has persistent blur but it's very small when running at high refresh rate due to how fast OLED is.
@@react1066Dyac! Zowie! best of the world for fps game bro
hi there! Is it completely normal if monitor flickering noticeable randomly when using DyAc? I play cs2 240hz and I see flickering a lot of time, Its not drastic but it annoys me, I dont know if lamp its about to finish, could you help me here plz
@prmx89
hi, sorry for late reply and also sorry for the situation. I am worrying if your monitor is abnormal or not, would like to suggest you to apply warranty on our website
If you are from US, please kindly visit:
zowie.benq.com/en-us/support/contact-us/email-us.html#repair
If you re from EU, please kindly visit:
zowie.benq.eu/en-eu/support/contact-us/email-us.html#repair
If you are from Asia Pacific regions, please kindly visit:
zowie.benq.com/en-ap/support/contact-us.html#repair
If you are from Latin America, Please kindly visit:
campaigns.benq.com/es-mx/forms/zowie_contactanos
Once you submit the form, please kindly share me the warranty tracking number ****** via our twitter: ZOWIEbyBenQ, or reddit: ZOWIESupport, please don't share any your information here *****, and then i can track your case on our system and follow up accordingly. Thank you.
love anti-blur
Dyac is fast damm
0:19
?
silence, and take my moneh!~ 💰💸
Srry but dyac only add input lag,they said no..but yes,add lag,and hurts your eyes so much,in that case gsync is better
I have an XL2411k and I use dyac and I never felt input delay also it doesn't hurt my eyes your eyes are sensitive that's why
Also gsync is not the same as dyac gsync only fixes the tearing problem which in my case sometimes doesn't and it also introduces some input delay
dyac does not add input latency.
You realise the latency is so small (if any) that you wouldn't notice, even despite the full I/O pipeline latency???? If it is as clear as ULMB2, then it's better to have than not. Try setting a stopwatch for 1-5ms and pausing it in that time span. You won't even be able to react lol. You're like one of those people that go "I'm lagging" because your network RTT in a game is 10 milliseconds higher.
@@ChrisYourDad I mean... you're telling someone who has the BenQ monitor, which by the way I don't use it, because the Asusvg279 that I bought later is better, you're telling me that it doesn't add input just because they say on their website that it doesn't add input lag ? They also don't tell you how dyac ruins your eyesight, and this is not for some, it's for everyone... it adds latency to turn on dyac 100% I assure you, but the fact that it hurts your eyes is worse, of course everything is clearly seen, of course Yes, but add lag and it will leave severe consequences in your eyes.
From gsync, although I do not use gsync, to dyac, I can tell you that gsync is better, because at least gsync does not hurt your eyes and only adds 1 more ms on compatible gsync monitors, and monitors with native gsync do not add more, turn on Dyac adds 4 more little more, that's why I didn't use it but I fell for their marketing, I don't recommend Benq at all, I spent 449 dollars in vain, to end up with one for 299 dollars in the end.
I have 3 monitors, an alienware, an asus and the benq, the asus vg279qm is better than both 100% guaranteed