Harley Davidson throttle positioning sensor fix

Поділитися
Вставка
  • Опубліковано 18 лис 2024

КОМЕНТАРІ • 40

  • @dannpd1955
    @dannpd1955 3 роки тому +7

    Good video. Short and to the point. I wish all of life worked that way.

  • @donaldfulmer7804
    @donaldfulmer7804 3 роки тому +5

    Great video, finally a guy that don't love to hear himself talk! My 07 superglide is doin the same thing, don't die but if u aint feathering the throttle I think it would, just what I needed TU!

  • @MrGabegambale
    @MrGabegambale 3 роки тому +1

    Got a 99 road king efi , you literally just told me the exact same thing that happened with my 88ci , time to buy a tps now thanx

  • @jaycewhelchel8721
    @jaycewhelchel8721 4 роки тому +1

    This did help major i was experiencing the same things bike wasn't quite dying but was close to it and thanks for keeping short and simple

  • @juanmelendez803
    @juanmelendez803 Рік тому

    Thanks,im fixd mine with your advice ❤ and saved a lot of money

  • @nicholasdidonna2488
    @nicholasdidonna2488 2 роки тому

    Same issue with my 07 heritage... TPS just got delivered yesterday and I'm going to replace it this weekend....

  • @philbell4546
    @philbell4546 4 роки тому +2

    Thanks for getting right to the point video helped

  • @oskukoo1189
    @oskukoo1189 5 років тому +2

    I've got same symptoms on my 07 softail, just bought new sensor after many hours of researching and cleaning IAC valve... Hope I get fixed also with new sensor

  • @jaredbeasley1246
    @jaredbeasley1246 2 роки тому +1

    Did you have to calibrate it of jus pull the old one off and put the new one on?

  • @snakebite6511
    @snakebite6511 Рік тому

    Im having that issue now on my wife's 2009 Tri Glide, it doesnt stall out but it will lack power, she could be driving along and have bogged down throttle but doesnt stall. got it home and was throwing code P2135 and some sub codes that all seem to point to the throttle position sensor

  • @dodgecharger892
    @dodgecharger892 5 місяців тому

    This helped out thank you so much 🙏

  • @davidchereneimmel8820
    @davidchereneimmel8820 2 роки тому +1

    Good to the point video thanks

  • @edgarquintana3874
    @edgarquintana3874 2 місяці тому

    Does anyone know what the other plug hanging from the TP sensor plug is?, you can see it in the video... what does that do?... is it the plug for the IAT sensor?... My bike came without it and runs just fine... It has an aftermarket K&N air filter... But I´ve always wondered if I'm doing any long-run harm to my bike...

  • @Ghurst2002
    @Ghurst2002 4 роки тому +2

    No need to calibrate it or anything? I bought a new one and a engine temp sensor and an air intake temp sensor... tired of this stalling issue

  • @dougbrian744
    @dougbrian744 Рік тому

    How did you get to that second screw? I just did that and the second screw was horrendous to get to

  • @austinmorton9394
    @austinmorton9394 3 роки тому +1

    Curious, did your bike throw a p1356? Mines having same issue as yours as well When you twist throttle for throttle I’ll check engine light will come on and then when I let off it’ll go off

  • @michaelwilliams2232
    @michaelwilliams2232 2 роки тому

    Im having same issues on my 01 softail deuce ! Thanks

  • @levialston518
    @levialston518 Рік тому

    Would it throw a p2135 code

  • @raymondpontremoli4500
    @raymondpontremoli4500 3 роки тому

    I have a 03 Road King EFI FLHRI with a Thundermax ECM. Im starting to think my TPS is worn or broken. My question is...Do you have to re-calibrate the TPS with the Thundermax.???? Doc Harley seems to think I have to0 but I cannot find anything in the Thundermax software are TPS calibration

  • @jvera718
    @jvera718 2 роки тому

    Hi, I’m having the same issues with my sporty dying at stops rides fines once it gets going. The only way it won’t die is if the choke is on which I know is not good to ride with. Was this your case? Thanks in advance

  • @jakemosca6587
    @jakemosca6587 4 роки тому +1

    I can't seem to get to the top screw on mine. Ratchet piece too big. 08 street bob.

  • @rocketman71863
    @rocketman71863 3 роки тому

    Is there a way to test those? Mine doesn't die, just chugs at low throttle and usually just when cold

  • @juliusdiaz775
    @juliusdiaz775 5 років тому +2

    Was your bike surging ? Before u swapped the tps ? Like would your bike jerk while accelerating ? I think im having the same issue with my 2002 road king

    • @juanartigasjr.1949
      @juanartigasjr.1949 5 років тому

      Did you change this part? If so did it work? I am having the same problem with my 02 Road King

    • @theroadking547
      @theroadking547 5 років тому

      I just started having the same problem. I cleaned it first, seemed to be okay. Problem came back, idling funny, check engine light came on. I'm gonna swap it out today if I can get one.

    • @jerryparsons7888
      @jerryparsons7888 4 роки тому

      Hello anyone ,same problem with 06 fatboy..is the process just removing and replacing the part or is there more to it? Thanks

    • @tomauerbach2321
      @tomauerbach2321 4 місяці тому

      I'm currently having the idle and surging issue with my 02 EFI Road King. Did you resolve your issue?

  • @RedCloudRoad
    @RedCloudRoad 4 роки тому

    I'm having sort of the same problem with my 12 road glide ultra. sputtering, but it hasn't shut off yet and no error codes from what i've seen. replace TPS? reset the tps?

  • @bigtoke3173
    @bigtoke3173 3 роки тому

    Did the speedometer stop working too? I just went through heavy heavy rain and am having the same issue plus the speedometer issue

    • @johngenthert8695
      @johngenthert8695 Рік тому

      Probably fixed by now, but it could also have been your speed sensor that goes into your transmission

  • @glennhurst7659
    @glennhurst7659 4 роки тому

    Mine does the exact same thing intermittently. Did this fix your problem?

  • @glenngreen5786
    @glenngreen5786 Рік тому

    Thank you God bless you Army core of Engieers. Now if Harley Davidson would be that honest.2013 to 2014 ecu module freid internal controls back brakes and secrity if the brakes start fading for get the bull about flushing fluid repace the module before it fries oh yeah the molex plug is why it fried shity wiring

  • @roberthammond8741
    @roberthammond8741 2 роки тому

    👊🏻😎🏁

    • @walteralvarado3640
      @walteralvarado3640 Рік тому

      I have the same problem on my 2008 Road Glide but I don't have throttle position sensor what can I do

  • @larryedwards1591
    @larryedwards1591 6 місяців тому

    Nobody tells you with those two screws what is easy you have to make a tool😢

  • @marine1rgchopper120
    @marine1rgchopper120 Рік тому

    you really didnt explain nothing, what about calibration?

  • @ocimarlacerda9724
    @ocimarlacerda9724 Рік тому

    smart move . thank you