Erbauer EAPS600 Airless sprayer Review on the job review no production crew just hard graft.
Вставка
- Опубліковано 19 жов 2024
- Here's the Erbauer EAPS600 Airless sprayer that I bought and assembled a few days ago and reviewed in my last video .
buy me a coffee
ko-fi.com/hand...
I'm.on job here and im a real person no production crew and no professional experience in that shasz.
mobile phones are handy for this kind of footage .
so the sprayer for 200 pounds is really good and does what it should. its best to buy better tips and differe t sizes too depending on what your using it for .
I'm using permagard permaseal damp proof paint
www.permagard....
it's been thinned down for the sprayer went on ok .
I've also been using sandtex which you can purchase anywhere on the major retailer sites .
we are not sponsored by any company so bear that in mind .
you can find me on my socials
instagram
Facebook
etx
Great video thanks for this, I’ve just bought one and had no idea about the waste bucket! Instructions weren’t clear but your video was as I had also seen a few others but no explanation of set up. Also others had both hoses in the same bucket! So thank you
Great .. instructions she far from perfect
thanks im using this machine next week for the first time very detailed video
Great it's a good bit of kit 👌 👍
Have you put external masonry paint through it? I'm tempted to use a waterproof and breathable paint on our tired pebbledash.. sprayer seems ideal. Keen to hear your experience
I've run sandtex smooth masonry paint through it watered down by 10%. I wouldn't advise using textured paint.
I've used aqua guard paint and normal emulsions .
Thinking of purchasing to use masonry paint. I noticed sandtex paint tubs in the video . Is this what you used and how much did you dilute?
I used sandtex smooth on 10% dilute for the airless sprayer
Bought this used it once worked lovely, now it won't prime and spray! Cleaned everything the valve the hoses everything. But pump kicks in continuously but hardly any suction??
Push the ball release button on the pump ..
Thank you ,verry helpfull vidio m
@charlesmaybank6323 no problem
Mine is not sucking the paint why do you reckon its not working ?
There is a valve that het stuck occasionally . Should be a red button somewhere you have to press it a few times to release the valve
Hi, I have a question whether this painting unit has any filter inside? I know it's on the dragon and the gun but I'm not sure if it has a filter inside the housing. thanks in advance for your answer.
There's a filter in the handle of the spray gun .. handle unscrews
Would this be any good with masonry paint? I wanna paint the render on the outside of my house - cheers
You need to check the brand of paint it will tell you if it's suitable for sprayer . Most paints are OK for sprayer if diluted correctly. Depends on the make usually tells you on the side of tub
No chance!
How much did you thin the Matt emulsion by
About 10 15%
Hi 👋 I’ve got one of these and it’s constantly running it doesn’t go off after priming it just constantly on when spraying and when not spraying I’m not to sure what I’m doing wrong 🤦♂️ please help 🙏🏻
Not sure . Only thing I can think over is not enough paint in the tub or it's the pressure that needs adjusting
Are both the pipes supposed to be in the paint after priming sorry I’m a roofer I’m just trying to save my daughter a couple of quid 💷
@@BadBadGolfUk when using priming mode use a spare bucket 🪣 to make sure it clears any fluid eg water until the paint comes through consistently. Then you can re clip it back to the feed pipe and put it in the paint . Once you've switched it into spray from prime it should stop pumping until you start spraying . But you need to make sure the paint is constant through the nozzle of spray gun so spray it into the spare bucket .
Do you roll brush after
Nice tutorial thanks
Does the machine need cleaning after every use or csn you leave paint in it over night between uses?
I tend to clean it through with water after a day .. might clog up over night
Mine was clogging a lot at the start, so I ran the paint through tights first (emulsion/latex paint), it was a lot better after.
Out of curiosity, what pressure do you run it at when spraying?
Yeah definitely needs straining .
I turned it right down then gradually up until pressure was right but don't not what pressure it was at probably about a third .
@@handyandyuk does this waste a lot of paint spraying than using a brush
Muslin is excellent for paint filter
👍👍👍
What tip do I need for gloss?
Depended on the gloss if it's oil based I wouldn't recommend putting it through the sprayer .
Others you need a 211 or 315 tip
Can't go wrong for 200 quid.
Definitely not.