Maintenance on Your RZR (part 2) Air Filter, Spark Plugs, Wheel Bearing, Grease Points
Вставка
- Опубліковано 7 бер 2020
- Today we head to the the garage to show cleaning the air filter, hitting the wheel bearing and grease fittings, and changing the spark plugs. Was informed the outwear covering the filter is part#799-504 from airraid for anyone wondering.
I’m an old guy, been ridding for the last 55 years off road, start on a mini trail 50, lots of motorcycles, birt bikes, street bike, four wheelers and side by sides over those years, I do all of my own maintenance too, I watches some of your videos, very well done my young friend, highly recommend your videos you other riders , great info
I do have one neg comment on this video, but great video, never use an impact on the spindle nuts, I have come across a few used rzrs that an impact was used, it’s not hard to mushroom the hub while the bearing is inside, then it’s a pain to get the bearing off and you have to replace the hub, I promise, have fixed three recently, but great info folks
Great Great Video boys! Love that impact. Keep making content and we will keep watching.
Thanks for sharing the filters! I really like those, looks like a strong upgrade from oem
Everything well explained. A+ guys. Thanks guys.
Have been running S&B for years in everything. And thank you for sharing that outerwear part number. As I’m a fine rat myself. And with how I’m set up I cannot fit a particulate filter set up.
Great video. Thank you sooo much for the help guys.
No prob, glad we could help 😊. thanks for watching!!
This is cool I knew knew there was a bearing greaser tool, thank you for this video
No problem, thanks for watching
Great job thanks, sold my 2014 900 xp just picked up a 2015 1000 xp that needs a little tlc
Wow great information for new owner
Thanks for the info was very helpful keep it coming
Will do!! Thanks for watching! :)
Great content guys I learned a lot of tricks from you guys - One comment about the rear sway bar greasing, I have a 2014 XP 4 1000 and the grease fittings are behind the mounting plate for the sway bar mounts.
Thanks for the compliment! 😊. I believe the earlier models had more grease fittings. Thanks for watching!
My 2019 has grease fittings behind the steel mounting plate also. Stick your finger back there and I’ll bet you have them also
Great video!!
Thanks for the compliment and thanks for watching!!
Hey, great video!! Start putting links (affiliate links from amazon or other sources). I went looking in the description for the bearing greaser. That will generate income !!
Thanks !
Hello, would you tell me what aja differential and engine oil you recommend, out of original because it is not available here, rzr 1000 xp doch,
Thanks
Great video!
can you leave a link to the S&B air filter outerwear please
every few miles you recommend me to change the strap, it has 1550 miles. and every few that of the oils and filters
Hey bud thanks for the content, love the videos. I was wondering what kind of grease are you putting in there ? I just bought a user machine and I’m going the maintenance on it for the first time. Thank you.
Thanks for the compliment. We typically use anything marine grade since they can be submerged alot if you drive in deep water and mud. Thanks for watching!
Thank you for having your flag hang correctly! Wonderful to see!
Im pretty sure there is grease fittings on the back side of the rear swaybar lol. Atleast thats how mine is 🤷♂️
Thanks ... just picked up a 17 rzr 1000. Just starting to go through it. I the grease tool the same for the front and rear ?
Same exact thing! Works great, just make sure to not over grease. Initially it'll take alot of grease but after that it's only take one or 2 pumps! Thanks for watching! 👍
Thanks for the video. Where did you purchase the tool that goes into the wheel bearing to grease the fitting?
I believe I brought it from CA Tech when they had a black Friday sale. It works great.
4/21; CA Tech is a "no gotz". Check Amazon, there are others.
As much as I'm finding you boys like greasing things I'm surprised you didn't dielectric grease those plugs. Lol.
Haha. Not the plugs. But I did dielectric the fuses. Had a few issues when pressure washing and water getting in there.
I just picked up my first side x side. 2012 polaris ranger rzr xp 4 900.
What else would you recommend to do for maintenance?
Previous owner changed belt last year and maybe put 10 hours on it since. 2,600hrs.
I live up in Alberta canada and it gets real cold up here.
Do you recommend 0-50 oil???
There is a part 1 to this as well that goes over some additional maintenance items. But I would mostly follow everything in the manual. Motor Oil, diff changes, checking on the air filter and blowing out the clutches every ride and cleaning them a couple times a year etc. Thanks for watching 😊
Are the greases both the same size. Ie. Front 40 rear 44 or reversed? Good luck
Hi, whats up with those cables you attached to the wheels? Did you make them? And the attachment points? I get mine on tuesday.
Was it the limit straps? If so I attach them to tow dolly my machine into the dunes. One side attaches to a hole in the trailing arm and the other to the shock tower. If you go back to our earlier videos of the tow bar you can see that setup.
Hey guys have a 2015 razr what's the best way to grease the middle prop shaft from inside removing the console or underneath removing the skid plate? Thanks
I would have to see the skid plate thanks for watching
Can you put a link in the description on what type of belts you guys use
That belt is the evo sandstorm, but that machine has moved on to the evo world's best now. We have had alot of luck with evolution powersports products.
what model airaid pre-filter is on that S&B 66-6000rwb air filter. i'd like to know to get one for mine
I believe it's in the description, thanks for watching!
Did you say you need to put about 20 pumps of grease in the wheel bearings the first time? should this be done right from the factory?
Yes! They come with a light coating but you should pump them up with grease as soon as you purchase a machine imo. Thanks for watching!!
Do you need different size wheel bearing grease tools? Or is front and back the same? And what size are they?
Same size front to back. Thanks for watching!!
What gap should a 16 rzr xp1000 na be at for spark plugs?
I would imagine it would be close to 30 but that is something you should look up. Our are different since we have bigger turbos.
Thanks for watching!!
What was the plug # for the colder plugs? I’m running E85 and 19 lbs of boost.
I ran stock plugs regapped for awhile on my big turbo setup so I think you'll be ok. I'll see if I can find the box for it though.
@@utvoutlaws6652 thanks for the input.
What air filter outerwear did you use on the s&b air filter? link?
I updated the info in the description. Don't forget to subscribe :)
Thanks
I like the little shop light, where did you get it?
Found it on Amazon. Think it was under $20. The adjustment knob makes it so i can turn it down and save the battery in certain situations.
@@utvoutlaws6652 what is the link to Amazon? Good vid though
I'm assuming you guys have figured out by now that the rear sway bar has grease points. I can show you if necessary. Might be worth updating the video
Any tips on how to grease those zerks? I have found them but they’re dang near in possible to grease well I’ve found
@@reesemcgee708 practice. That's about it. Eventually your fingers practically have eyes. You know what you're grabbing when you are reaching around back there.
Agreed on being a pain, gotta love the dumbass Polaris engineer that thought it’d be better behind it🙄👎🏻
I just put on the s@b filter. The ends of the airbox cover don’t seem to close tight. Top and bottom seem ok. Do you have that issue? Thanks
No we do not have that issue we have that filter on three machines right now
@@utvoutlaws6652 thanks
Where do you get the bearing grease device
We both got one a few years ago. Think these are from CA tech, now there are a bunch on the market. Works great 👍. Thanks for watching!
Any good grease for the bearing or you recommend something in particular?
I think we both like marine grease for anything that is going to be submerged at some point, no particular brand. Thanks for watching! 👍
@@utvoutlaws6652 thank you for the quick response. Gonna spread the word about your channel, liked and subscribed 🤘🤘
Sounds good 👍 thanks for the sub!!
any idea where to get that grease thing from?
I think mine is a ca tech but if you do a Google search you can find a bunch. Thanks for watching!
TORQUE FOOT LBS?
What wheels are those? Also what tire size?
Douglas star fighter beadlock 14x7 with a 30x10x14 terabyte tire. It was a way of getting a durable set of tires with beadlocks for a good price. From what I've heard, dwt hasn't spun wheels in a long time due to moving locations so it'll be awhile on the wheels. Thanks for watching!!
What Airaid filter skin is that? Part number or application info?
The airaid filter is a similar size to the s&b. Its the outerwear that they sell for their turbo rzr filter directly from airaid.
@@utvoutlaws6652 i can't find any filter skins from airraid any chance you have a part number all i find is there k&n look alike filter
Did you make those cables for suspension droop?
I made them for our tow bar system and use them on other things. Got everything from menards. Used some cables and some hooks from a old pair of rachet straps. Crimp them down at the exact lengths. Thanks for watching!
@@utvoutlaws6652 awesome! Thanks for the reply!
No problem, thanks for watching!!
subscribed as soon as i saw TRUMP flag!!!