Before YT I would have had to call someone to replace my garage door openers. Amazing how much I have learned to do myself thanks to helpful vids like this. Thank you!
THANK YOU!! I spent an hour following the instructions from Amazon and couldn’t program both! I watched your video and pgrammed 3 remotes in a few seconds!! Thanks!!
Thank you! The instructions on the machine say to press and hold the button on the machine and remote until the machine lights start flashing, which does not work. Turning on the machine and clicking quickly once, as you demonstrated, worked! Thanks again!
Perfect information! Glad I saw your video and followed your simple advice to add a third remote unit rather than reprogramming both my existing remotes and keypad. A five-minute job the way you taught this. Thank you immensely!
Thanks for discussing the difference between already having a remote programmed and adding an additional remote without wiping the connection with the original remotes
Question... I want to program 1 remote to 2 different garage doors. I have one programmed in. But the 2nd garage door won't program in. The opener light keeps flashing. Help!!! Everything is Chamberlain.
So many videos don’t discuss adding a universal remote to an existing remote. Thanks for the simple explanation. I was about to lose it before seeing your video….lol
Hi thank you for the video I have a quick question. once I was able to add the remote control for the door opener my touchpad no longer worked from outside. Am I able to use both the remote control or the touchpad that I have attached outside outside the garage? It's a 4 digit code...
thank you for the video! i have 2 remotes for my garage door. 1 has stopped working due to use. (Have to mash the button like 10 times for it to work) 1 works perfectly (the one i keep in the car). After watching this video, i think ill just buy a new remote and program it.
Hello. Thank you for the video. When you program a certain amount of remotes on an old Sears Red Learn Button (or other opener) does it start to erase previously saved remotes at some point? TYIA
Thank you so much for this video, just wanted to add, make sure you program your controller with the correct button color on the motor. I was trying to add another and because of this It wasn’t working
So how do you remove a button from syncing with a garage door? I had a spare unit that I now need. The installer for some reason had button 1 & 3 open garage door #1. I would like to remove garage #1 from button 3 and replace it with Garage door #2. I tried your step anyway, and now button 3 opens both garage doors. Great video BTW!!!
I bought an older home that has a perfectly good Chamberlin garage door system (motor) it's older than 2005... only issue there was no opener given at closing, I tried to program a universal remote opener with no luck.... my question is could this motor just be too old to reprogram a new remote? Just wondering before I go spend $$$ on a new garage opener system. Thanks
I have a question , when you program a new remote or a replacement remote what happens to the original remote? Does is still works and would open garage door ? My old remote was stolen.....
The original remote will still work, so you need to clear the programming completely and then add new remotes. To clear your unit the process depends on the brand, but the two most common ways- 1) on the opener itself (not the remote) push the learn button until the LED turns solid. Press and hold the up and down buttons (these adjust height) together until the LED turns off. If that doesn’t work for your brand, try 2) on the opener itself, press and hold the learn button until it flashes, keep holding it until it turns off. With either method, test it by trying your other remote and make sure the door doesn’t open
2:02 - I get to this step, and nothing. No clicking. No bulb turns on. Nothing. Checked battery in the remote - brand new CR2032. Wall unit switch btw works fine. Reset the codes in unit. Tried this step again. Nothing. Thoughts?
Sometimes universal remotes are set up to have two channels. This requires you to change the channel prior to programming. It is usually the case that you’ll hold the first and third buttons on the remote until the led blinks. Then try the process in the video again and it should work.
@@GarageMaxedOut Appreciate the reply. Turned out I needed a whole new clicker. I guess old clickers with fresh batteries go kaput. New clicker ordered from Amazon. Went through the programming steps. Voila.
The two remotes I received have a more complicated procedure involving pressing a button on the back then pressing one of the buttons on the front twice depending on the color of the learn button on the door operator, in my case purple for the learn button. Then pressing and holding the learn button, the purple button, at the same time pressing the same button on the remote...one worked the other did not.
I have one remote for my garae door and I bought two more to be needed for other family members. The new remote I bought are compatible with my garage door opener ( Chamberlain). My question is if I follow your process as you show on the clip, to program the new remote it will not affect the existing remote and the car remote that I have been using now. From your video looks like it should not but I want to clarify.
When I program the remote to the opener it takes 4 clicks to open and to close. I’ve tried different remotes and it’s the same result and I don’t understand why. I’ve cleared the memory of opener and reprogrammed remote and same result
Depending on your unit the process will vary. The most common methods 1) press and hold the learn button on the opener itself until the light flashes, keep holding it until the light goes off. If that doesn’t work 2) press the learn button until the light goes on, press and hold the up and down arrows on the opener itself until the light turns off.
My Overhead 450A doesn’t have any little led of any color just a big old light bulb which goes on if I open the door from the doorbell and I don’t see any button to turn anything on or off on the unit Are you talking about a red led on the remote? If not Where is it? I can’t figure it out The old remote is all corroded inside so it is shot. It could be as old as 1988. The door still goes up and down by using the wall button but it’s not convenient.
What color button is on the back of your unit? For yellow order this one- amzn.to/3LrInGG. For purple order this one- amzn.to/4f5Qzdi. Alternatively, you can buy these universal remotes that work on many different colors- amzn.to/4f1zS2x. The universal remotes require an additional step at setup to change the frequency (usually, hold down 1 and 3 to change bands).
When trying to setup the outside keypad I wiped out my remotes. Now I’ll try to get the remotes working but how do I setup the keypad without doing what I did before? 😫
What if your remote was previously programmed to a different garage door house and now u want to program it to your new house. How do u erase and reprogram it to your new garage door? Tried a lot of things but nothing works.
My linear LD033 the clicker has to be within 3 feet of the opener for it to work, the learning light is always on, kinda flickering but always on. wall panel works. reprogrammed the opener, changed battery, clicker works on another door. erased memory and reprogrammed it, unplugged the opener and non worked, any tips
I know this comment is old, but I was having similar issues after replacing the lightbulb with an LED one. Make sure the lightbulb is an old fashioned incandescent bulb and then try again.
I lost my remote control for my lift master so I went to home Depot and bought a new one (953EV-P2MC) to program. But following your step but it doesn't work
What did I do wrong? Mine opens and closes alright but the door opens on its own after some time. 1 day, I woke up in the am and my garage door was open.
I have an infinity type remote for my Chamberlain 2011 garage door. There is on one thing I need to know and that is the details of what remotes are compatible. Without this information the video is useless. I have tried every type of remote from Home Depot, Canadian Tyre including a garage door company and nothing works. I have googled this question and cannot find an answer. Not happy that this bit of key information is missing.
Good video but I'm still at a loss. I have a 1997 Chamberlain Security +, 1/2HP Opener. It has a red programming button. Have 2 of the LiftMaster Security + remote openers. A 2011 Suburban with a 3 button opener by the mirror, and a 2019 Toyota with a 3 button opener by the mirror. I can't seem to get the trucks and the LiftMaster remotes programed to the same frequency so that all 4 will open the door. Can anybody point me in the right direction?
Make sure you are using the right remotes, red button ones require these- amzn.to/3s7KJQt. If you are, first clear all remotes by pressing and holding the red button for 6 seconds- the light will go on and off. Once cleared, start adding remotes starting with the two hand held units. Push the button and quickly release, and your light will go on for 30 seconds. Hit the button on the remote, wait a second, and then hit the button on the remote again. If it took the program, your door will open or close. Repeat for the second remote. Once the two remotes are programmed, go to your vehicle with one of the remotes and follow the program procedure specific to your vehicle. For instance on the suburban, press and hold the outside buttons on the truck's opener and the light will flash rapidly after 20 seconds. Then, press and hold the button you want to program and the button on your programmed remote holding the remote 1-3 inches away. Hold until the light on the truck's opener starts flashing slowly. Press the truck opener to confirm the program took. Repeat for the other vehicle.
Thank you! I tried this and it didn’t work. My issue was figuring out what color my garage button was. My remotes also had instructions on the back that said I needed to press the back button, ( very tiny button) I suggest anyone read the instructions for their remote cuz the button color looked brown. Turns out it was purple 😅Mines are from Amazon 2 for $13 instead of 1 for $35😈
Before YT I would have had to call someone to replace my garage door openers. Amazing how much I have learned to do myself thanks to helpful vids like this. Thank you!
FIRSTLY AND MAINLY THXS TO OUR GOD ❤❤❤❤❤💯💯💯🙏🙏🙏🙏MY FAMILY AND ME WE KNOW THAT 💯💯💯❤️❤️🙏🙏🙏
THANK YOU!! I spent an hour following the instructions from Amazon and couldn’t program both! I watched your video and pgrammed 3 remotes in a few seconds!! Thanks!!
Glad it could help!
Thank you! The instructions on the machine say to press and hold the button on the machine and remote until the machine lights start flashing, which does not work. Turning on the machine and clicking quickly once, as you demonstrated, worked! Thanks again!
You are welcome!
Perfect information! Glad I saw your video and followed your simple advice to add a third remote unit rather than reprogramming both my existing remotes and keypad. A five-minute job the way you taught this. Thank you immensely!
You are welcome!
Could not figure out how to connect 2 remotes until this video. Thank you so much bro!! You’re a life saver!!
Any time!
the best video to explain how to program second garage remote control thanks a lot for this video
THANK YOU SO VERY MUCH!! I was getting ready to send these new remotes back to Amazon! Not now... thanks to YOU!
You are welcome!
Thanks for discussing the difference between already having a remote programmed and adding an additional remote without wiping the connection with the original remotes
Glad it was helpful!
Thank you!!! We have two remotes and all the other videos don’t clarify how to program an additional one!!!
Question... I want to program 1 remote to 2 different garage doors. I have one programmed in. But the 2nd garage door won't program in. The opener light keeps flashing. Help!!! Everything is Chamberlain.
Thanks pal! Just got a spare garage remote to keep for myself 😁
FIRSTLY AND MAINLY THXS TO OUR GOD MY FAMILY AND ME WE KNOW THAT ❤❤❤❤💯💯🙏🙏🙏🙏
Thanks, very fast and simple programming. Only 2 buttons!
So many videos don’t discuss adding a universal remote to an existing remote. Thanks for the simple explanation. I was about to lose it before seeing your video….lol
Glad it helped
Thank you very much I’ll give two thumbs up.
Thanks!
I needed this video. Thank you!
So helpful. Literally just programmed my garage door remote to my opener. 🎉thank you
Glad it helped!
Really appreciate the contribution this would have been a hassle to figure out myself thanks for the video
No problem 👍
Thank you!!! I've never had a garage before & trying to learn all the stuff about the door. This is super helpful ❤
Glad it was helpful!
Very helpful thank you
Glad it was helpful!
Hi thank you for the video I have a quick question. once I was able to add the remote control for the door opener my touchpad no longer worked from outside. Am I able to use both the remote control or the touchpad that I have attached outside outside the garage? It's a 4 digit code...
Did you press and HOLD the button on the garage door opener or just press once?
I pressed and held...
thank you for the video!
i have 2 remotes for my garage door.
1 has stopped working due to use. (Have to mash the button like 10 times for it to work)
1 works perfectly (the one i keep in the car).
After watching this video, i think ill just buy a new remote and program it.
Is there a maximum number of connected remotes that we can't exceed?
Genie claims they will accept 6 to 7.
Great instructions for additional. I kept wiping out the previous... Thanks!😊
Glad it was helpful!
great quick video; perfect. Needed to reprogram remotes after I falied at setting up a useless keypad. But at least redoing this part was easy.
Great to hear!
Just saved me $170. Piece of cake!
All all replacement garage door opener remotes universal?
Will any replacement remote work with any door opener?
!
No, you will need the correct remote for your opener- check the description for links
I have an Overhead Door operator that currently has 3 or 4 remotes paired. What is the max number of remotes allowed?
Hello. Thank you for the video. When you program a certain amount of remotes on an old Sears Red Learn Button (or other opener) does it start to erase previously saved remotes at some point? TYIA
No, unless you reset the unit
Thank you so much for this video, just wanted to add, make sure you program your controller with the correct button color on the motor. I was trying to add another and because of this It wasn’t working
I bought two. 1 programmed without a hitch. The other I can't get to work is there a way to reset it?
Good tutorial. Straight forward no bs.
Glad it could help!
Thank you brother! Awesome perfect Video!
I realize it is kinda off topic but does anyone know a good place to watch new movies online ?
@Anson Zakai I watch on Flixzone. Just search on google for it =)
@Harley Bronson yea, have been using flixzone for since april myself :)
@Harley Bronson thanks, I signed up and it seems like a nice service =) I appreciate it !!
@Anson Zakai happy to help :)
So how do you remove a button from syncing with a garage door? I had a spare unit that I now need. The installer for some reason had button 1 & 3 open garage door #1. I would like to remove garage #1 from button 3 and replace it with Garage door #2. I tried your step anyway, and now button 3 opens both garage doors. Great video BTW!!!
I bought an older home that has a perfectly good Chamberlin garage door system (motor) it's older than 2005... only issue there was no opener given at closing, I tried to program a universal remote opener with no luck.... my question is could this motor just be too old to reprogram a new remote? Just wondering before I go spend $$$ on a new garage opener system. Thanks
What color program button does it have?
@@GarageMaxedOut it only has one "learn" button and it's green
@@stephp8761 This is the one you need for a green learn button- amzn.to/3zfMA85
@@GarageMaxedOut thank you!!!!
Thank you
You're welcome
Actual video starts @1:23
Thanks for watching
Thank you for taking the time to show me how to set good job buddy 👍👍👍
Thank you!
Thanks 👍
Thanks a lot man!!
If I have one liftmaster chamberlain remote and want to program another Clicker model KLIK1C remote control, will both remotes still will work
Does it matter what button you press the close or open one. The light doesn’t flash on mine
Could not be any easier. Thanks a lot.
Happy to help
Thank you. Appreciate you
Glad to help
Explain clear and thanks ^^
Glad it helped!
I have a question , when you program a new remote or a replacement remote what happens to the original remote? Does is still works and would open garage door ? My old remote was stolen.....
The original remote will still work, so you need to clear the programming completely and then add new remotes. To clear your unit the process depends on the brand, but the two most common ways- 1) on the opener itself (not the remote) push the learn button until the LED turns solid. Press and hold the up and down buttons (these adjust height) together until the LED turns off. If that doesn’t work for your brand, try 2) on the opener itself, press and hold the learn button until it flashes, keep holding it until it turns off. With either method, test it by trying your other remote and make sure the door doesn’t open
Question:
Is DIP swithches position in the second Remote the same or must be set differently with the first one?
Thank you and look forward yr reply
Great video!! Thanks!!
Glad you liked it!
2:02 - I get to this step, and nothing. No clicking. No bulb turns on. Nothing. Checked battery in the remote - brand new CR2032. Wall unit switch btw works fine. Reset the codes in unit. Tried this step again. Nothing.
Thoughts?
Sometimes universal remotes are set up to have two channels. This requires you to change the channel prior to programming. It is usually the case that you’ll hold the first and third buttons on the remote until the led blinks. Then try the process in the video again and it should work.
@@GarageMaxedOut Appreciate the reply. Turned out I needed a whole new clicker. I guess old clickers with fresh batteries go kaput. New clicker ordered from Amazon. Went through the programming steps. Voila.
Thank you helpful..
Would this set up work for Linear replacement remote?
Thank you!!
The two remotes I received have a more complicated procedure involving pressing a button on the back then pressing one of the buttons on the front twice depending on the color of the learn button on the door operator, in my case purple for the learn button. Then pressing and holding the learn button, the purple button, at the same time pressing the same button on the remote...one worked the other did not.
Thanks man! Didn't know it was that simple
No problem!
I have one remote for my garae door and I bought two more to be needed for other family members. The new remote I bought are compatible with my garage door opener ( Chamberlain). My question is if I follow your process as you show on the clip, to program the new remote it will not affect the existing remote and the car remote that I have been using now. From your video looks like it should not but I want to clarify.
That’s correct
Thank you.
I have a Marantec Garage system .
Can I purchase a universal garage remote like Lift master?
You’ll need this remote- amzn.to/3U0ujZR
Thank you .
I have one more question for you how do I re program the garage wall mount remote button unit in my case I have a 3 car garage martec
Is that a low hanging ceiling fan in the back of you?
For air flow
Thanks! Easy peazy
You bet!
Thanks
Glad it could help!
thank you, it worked!
You're welcome!
THANK YOUUU 💪🏼
When I program the remote to the opener it takes 4 clicks to open and to close. I’ve tried different remotes and it’s the same result and I don’t understand why. I’ve cleared the memory of opener and reprogrammed remote and same result
Thank you so much!!!
You're welcome!
I didn't hear what he said; can or can't program an extra remote with the circles on the front, (infinity sign?)
I have a Genie and bought 2 additional remotes. If I program one, it works. If I program the 2nd one, the first one quits working.
So how do you wipe out the codes if you had one stolen, then go to program 2 new remotes?
Depending on your unit the process will vary. The most common methods 1) press and hold the learn button on the opener itself until the light flashes, keep holding it until the light goes off. If that doesn’t work 2) press the learn button until the light goes on, press and hold the up and down arrows on the opener itself until the light turns off.
Super helpful, thanks!!
Glad it was helpful!
How do you program if you don't know the code; my home's previous owner did not remember the code.
You a life saver thank you
You got it!
My Overhead 450A doesn’t have any little led of any color just a big old light bulb which goes on if I open the door from the doorbell and I don’t see any button to turn anything on or off on the unit
Are you talking about a red led on the remote? If not
Where is it? I can’t figure it out
The old remote is all corroded inside so it is shot.
It could be as old as 1988. The door still goes up and down by using the wall button but it’s not convenient.
I need new remote (2) how to ordered?
What color button is on the back of your unit? For yellow order this one- amzn.to/3LrInGG. For purple order this one- amzn.to/4f5Qzdi. Alternatively, you can buy these universal remotes that work on many different colors- amzn.to/4f1zS2x. The universal remotes require an additional step at setup to change the frequency (usually, hold down 1 and 3 to change bands).
On the remote did you press the left or right button?
Great it worked the first time
Good to hear
Thank you! :-)
You're welcome!
When trying to setup the outside keypad I wiped out my remotes. Now I’ll try to get the remotes working but how do I setup the keypad without doing what I did before? 😫
Help. We got a new keypad and finally got it working, then the remotes stopped working. All are different brands, can you help please.
What if your remote was previously programmed to a different garage door house and now u want to program it to your new house. How do u erase and reprogram it to your new garage door? Tried a lot of things but nothing works.
Usually the common procedure is to hold down the first and third buttons for 10-15 seconds
My linear LD033 the clicker has to be within 3 feet of the opener for it to work, the learning light is always on, kinda flickering but always on. wall panel works. reprogrammed the opener, changed battery, clicker works on another door. erased memory and reprogrammed it, unplugged the opener and non worked, any tips
I know this comment is old, but I was having similar issues after replacing the lightbulb with an LED one. Make sure the lightbulb is an old fashioned incandescent bulb and then try again.
Where did you find those remotes for $12?
THANK YOUUUUU BROOOOO😊😊
Glad it helped!
I lost my remote control for my lift master so I went to home Depot and bought a new one (953EV-P2MC) to program. But following your step but it doesn't work
So close yet so far .Second remote is bawking.
What is it doing?
thank you kind GOOD sir
Happy to help
What did I do wrong? Mine opens and closes alright but the door opens on its own after some time. 1 day, I woke up in the am and my garage door was open.
I have an infinity type remote for my Chamberlain 2011 garage door. There is on one thing I need to know and that is the details of what remotes are compatible. Without this information the video is useless. I have tried every type of remote from Home Depot, Canadian Tyre including a garage door company and nothing works. I have googled this question and cannot find an answer. Not happy that this bit of key information is missing.
It’s in the video- it’s all based on the color of your reset button. Check links in the description
When you add a new remote I already have two remotes programmed do I have to program all of them all over again or just the new one?
Just the new one unless you hold the Learn button for 30 sec, which will erase all remotes it has already learned.
Up to your preference, I would just add one though
Yup exactly
Very good and simple to learn.
Glad you think so!
Good video but I'm still at a loss. I have a 1997 Chamberlain Security +, 1/2HP Opener. It has a red programming button. Have 2 of the LiftMaster Security + remote openers. A 2011 Suburban with a 3 button opener by the mirror, and a 2019 Toyota with a 3 button opener by the mirror. I can't seem to get the trucks and the LiftMaster remotes programed to the same frequency so that all 4 will open the door. Can anybody point me in the right direction?
Make sure you are using the right remotes, red button ones require these- amzn.to/3s7KJQt. If you are, first clear all remotes by pressing and holding the red button for 6 seconds- the light will go on and off. Once cleared, start adding remotes starting with the two hand held units. Push the button and quickly release, and your light will go on for 30 seconds. Hit the button on the remote, wait a second, and then hit the button on the remote again. If it took the program, your door will open or close. Repeat for the second remote. Once the two remotes are programmed, go to your vehicle with one of the remotes and follow the program procedure specific to your vehicle. For instance on the suburban, press and hold the outside buttons on the truck's opener and the light will flash rapidly after 20 seconds. Then, press and hold the button you want to program and the button on your programmed remote holding the remote 1-3 inches away. Hold until the light on the truck's opener starts flashing slowly. Press the truck opener to confirm the program took. Repeat for the other vehicle.
*JESUS CHRIST LOVES YOU AND CARES FOR YOU HAVE A GOOD DAY EVERYONE*
Didn't work my learn button keep blinking
Thank you! I tried this and it didn’t work. My issue was figuring out what color my garage button was. My remotes also had instructions on the back that said I needed to press the back button, ( very tiny button)
I suggest anyone read the instructions for their remote cuz the button color looked brown. Turns out it was purple 😅Mines are from Amazon 2 for $13 instead of 1 for $35😈
Can also buy from ebay (small store operators) or Lowes. I never buy anything from Amazon. Too much of a monopoly.
Didn't work with my LiftMaster.
Sorry to hear that
Not working
Thank You!
You are welcome!
Lol wtf I just payed 135$ to get another pair installed. I feel scammed by the company who had the audacity to put their number on my garage button
Yeah, it’s much cheaper to just do it yourself
It doesn’t work
Which part? What brand unit do you have?
Saaaaaweeeeeeeeeet
Terrible echo. Had to hear.
Sorry, big garage