How To Program A Remote For A Liftmaster, Chamberlain Or Sears Garage Door Opener
Вставка
- Опубліковано 29 вер 2024
- Here are some of the tools that get it done home repair uses
www.amazon.com...
Programing a new remote is very easy. Come along as I will show you how to program a new remote for a LiftMaster, Chamberlain or Sears garage door opener.
Disclaimer:
Due to factors beyond the control of get it done home repairs, it cannot guarantee against unauthorized modifications of this information,. get it done home repairs assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. get it done home repairs recommends safe practices when working with power tools, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of get it done home repairs, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not get it done home repairs.
Excellent, thank you. You gave directions the way the instructions SHOULD have. It did it in seconds. VERY clear directions.
Glad it helped!
Exactly what I was thinking. Why in the world do I have an 8x11 sheet of paper when it's just two steps😮 Thanks a bunch. I got one to work but still working on the other🤞🏾
Thanks for the help! Was able to program my extra remote in about 3 minutes!!
Glad I could help!
Update my garage door is now opening and closing. One of my sensors was off line. So your video did help me to program a remote. Thank you!
Glad it helped
Clear, concise, straight to the point and very helpful. Thank you!
Glad I could help!
Took me less than 5 minutes to program both of mine. Thank you for showing how.
Thank you so much. Great video!
Glad it was helpful!
Thank you sir
Took me 3 seconds thank you
That's exactly what I need, simple and straightforward. I've watched other videos, too long and not working at all.
Yes, I agree he did a great job of explaining 🤩👍
Thank you
You're welcome
The lift blinked but and the remote also blinks red but the door doesnt open.
Get out of here! Took 2 seconds. Thank you!!! You get a like.
Jordy Mountain
I cannot even get a single one programmed in and I've done it like that and it will not flash
Thanks for watching. What happens when you push the button?
Hayley Ville
Maia Island
Didn't work for me. I have four extra remotes - each time I changed openers (liftmaster), I purchased two remotes. The latest is a Chamberlain - came with one remote. Tried to program a second remote......no way.
Yep! Me too! Struggling to figure out what’s up….
Same.
Same.
Ditto
Mine isn’t working either
This just saved me from buying new remote...thanks so much .. Very straightforward video.Exactly what I needed.
Glad it helped
I don't have a purple button.
Thanks. That worked just great for my liftmaster. Got a new remote for my truck and didn't want to erase old ones. Perfect.
This was both brief and helpful - thank you for this!
Glad it was helpful!
Mine doesn’t close and after 2 months it doesn’t even open my garage door. I have a lift master 1/3 hp garage door
Finally! Thanks so much for explaining how to add a remote without disrupting the programming for other remotes! Many others only explained how to erase all remote programming, then start. Thanks for answering my simple question!
Glad it helped
So what do you do with a remote that works fine on another door (chamberlain) so I know remote is fine but will not program on the one I want? Do the simple procedure and nothing.
Hi sir I have lift master oldest model garage door consoleetc but I buy smart operner alladin conect it says conect wire with no 3 and 4 but in lift master there are only 3 wire screw where we can conect how can I conect?
I followed the steps, works… only thing is that it only opens the garage door, doesn’t close it. not too sure what went wrong
Great video but i am having a trouble when i push the learn button but the orange light don't stay on what this could be?
Why both my remotes are not working after trying this? Anything I’m missing here?
Why doesn't it work? The light on my remote just flashes.
I set the extra remote but canceled out the existing one that was already set? Help!
there's 100s of garage door opener videos on yt but this is the only one that actually answered my question, thank you!
Glad it helped. Thank you for your comment
I know this is 4 years old, but the instructions on my door opener would not allow me to reprogram the remote, this video was spot on.
Thanks
Glad it helped
Thank you for this tutorial! It was a breeze to program my garage remote. 😁
Glad it helped!
why can't everything connect so easily! thanks
Hi.. my garage didnt come with the keypad…can u pls tell me which keypad model is the right one to go with this chamberlain garbage ?? I got the same garage as your
You can but a universal keypad at any big box store.
Presto! Thank you thank you thank you! My bf will think I'm a genious!!😂
Perfect!
Program outside remote to new Chamberlain
What model exactly is that motor and what model is that control and its frequency, can you help me with that?
Sorry I don't recall.
1:35 - Hooray! Working now. Btw my old Liftmaster remotes (those you have in your hand) went bad, even when refreshing the CR2032s. Guess they go bad when not used in a long time. Who knew.
Bought a new opener from Amazon, followed the programming instructions for remote. Voila.
My fear was I needed to replace the logic board on the Liftmaster unit.
Note for all - Get a new remote and program it, before investing in a new logic board. 👍
Unfortunately doesn't works, what am I doing wrong😢
Do you have the correct remote?
Hey am I missing a step. I pushed the code button. Indicator light stay on. Next I clicked the transmitter on remote and the lightbulb blinked 2x. Then I clicked transmitter again the garage door opened but will not go back down.
Smashing way of explaining. Took 30 secs to do it. Gracias señor
Glad it helped
Waelchi Plaza
Wow, super easy. Programmed two remotes in under 20 seconds. Thank you! 👍
Glad it helped
My motor is accessMaster and I couldn't get it to work with my universal remotes...
I hit the button but the lights dont blink. I have the single button Liftmaster remote. Checked the battery and bulbs are fine. When I click the button on the overhead unit, its mini light comes on... what else to try?
Cyril Alley
Goyette Plains
I like your video. You pointed out something very important " when you program a second remote it will not erase the first remote".
Lester Meadow
Schultz Drive
Kemmer Throughway
Haley Rest
Ledner Springs
Marks Burgs
Lincoln Crescent
Very simple and straight forward. However programming my car homelink garage door opener is a pain in the butt
Haley Expressway
Jaiden Turnpike
Halvorson Valley
Clementine Bridge
Ward Heights
Viola Centers
Walker Rapids
Quitzon Estate
Donnelly Keys
3 years later and still useful thanks 😊
Glad it helped!
I have a Merlin garage door and Merlin remotes but my screen wall mounted one says chamberlain as well as on the back of each Merlin remote. Is it possible to use a chamberlain 433A remote on my Merlin door which currently uses Merlin C953 remotes? Thanks.
Schimmel Trail
Jones Track
Unfortunately, it did not work for me. Instructions were clear, but did not work with my Liftmaster.
Are you sure that you have the correct remote?
@@getitdonehomerepair This is the remote that I bought. 2 for Chamberlain Liftmaster Craftsman Garage Door Opener Remote 891LM Learn. It looks like the original one that I have.
If this is not the correct remote, please advise what I should get.
Poor dogs are being disturbed!
Hahaha. Thanks for watching.
Berge Ridges
Arnulfo Wells
Dibbert Cape
Fahey Roads
Thanks, I appreciate it. New Garage remote is working. Easy to program
Hansen Hills
Litzy Path
Shaylee Lane
Flatley Mill
Aleen Centers
Clear directions. Unfortunately didn't work on ours. 😢
Runolfsson Spurs
It worked! I lost my old remote around a month ago and I couldn’t figure it out
Do you have to reprogram the remote control after changing the battery?
Quick.
Thank you so much! Saved me a bunch of time trying to figure this thing out
Thank you so much, sir! God Bless you.
You are very welcome
Thanks!!
Do you hold the button down on the remote or repeatedly push the button.
Does the led need to be green or can it be orange?
In this case it was yellow
Thank you
Wtf
Thank you
GREAT video thank you. I will also mention if you are trying to pair one of these to a MyQ Smart Hub (The white devices), you need to clear the old codes first.
Thanks for the info!
Streich Squares
Nice
THANK YOU SO MUCH,
they wanted to charge $75 just to come out.
I just synced my spare remote, after my Main one went out!!
Thank you so much!!
Just cost me some pride, and sweat
Glad I could help
Thank you - the instructions that came wiht my remote were wrong and you explained it perfectly. Thank you!
Glad it helped