Garage door remote control not working. Program. Battery. Reset.
Вставка
- Опубліковано 4 лип 2021
- If your LiftMaster Chamberlain garage door remote control clicker not working, programming is an easy fix. You may need a CR2032 battery replacement or a reset. Also, you can add a new garage door opener remote easily, and program it to the existed system.
- Навчання та стиль
What you mentioned about 're-programming' the Remote Control Opener actually did the trick.
No one else mentioned this.
Thanks!
You have a a new subscriber.
Glad it helped
thanks so much for your simplified instructions, you saved me a whole lot of money. I have had the Sears unit for 35 yrs and works perfectly. The hardwired push button wall mount opener died from a bad circuit board. I called the local "Overhead Garage" door business that has been here forever and asked them if they could replace my wall mount. They said that I would have to get a whole new garage door opener unit and they would have to install it. I called her a fraud and hung up on her and promptly Yelped that business. You just can't trust anybody in business esp now with the COVID thing as a big excuse. I went to Home Depot and got a handheld remote for $14, put Velcro on the back, and stuck it where the old hardwired one was. Good to go. thank you
Glad it helped!
Quick, clean, useful video! Thanks!
Glad it helped!
Thanks for keeping it quick and getting to the point
Thanks a lot.
Never realised there is a lock switch in the wall remote and it’s purpose until now!
Thanks again
Thanks for this video. I had no idea using LED bulbs in the openers would cause clicker reception problems. Unscrewed the bulbs and bingo, I was able to program my new clicker.
Glad it helped
Perfect! My newly-installed opener's remotes, though supposedly already linked to the opener, were not, so a quick program did the trick. Thanks!
Great to hear!
Perfect video! Thank you
Oh my gosh, you saved us!! We could not figure out what was wrong. Our garage openers worked randomly and it was driving us crazy. We tried everything but we never thought about the brand new LED bulbs we put in. We came across your video and realized the LED bulbs were messing up our brand new remotes. Thank you so much!!
Glad it helped :)
This guy's amazing that light bulb would've cost me thousands
I highly appreciate your video. Thanks a lot !
Glad it was helpful!
Thanks so much plain and simple.😊😊😊
Glad it was helpful!
Perfect video! You just saved me so much money! Thanks!
Great to hear!
Thank You for the video, it fixed my problem!
Great to hear!
Thanks. This helped me today! I had to just unplug and put plug back in and it worked!
Good to hear it!
Thank you! Your instructions helped!
Great to hear!
Thanks! The lightbulbs did the trick- I can’t believe it
Glad it helped.
Such an informative video - thank you! This helps.
Glad it was helpful!
Thank you. Easy to understand. Step by step
Glad it was helpful!
Thank you thank you so much, it was solved through your Tutorial!!
Good to hear it!
Very informative, i had no idea about the LED lights! argh now I have to go buy more lights.
Glad I could help!
Thank you for posting this, it’s work ❤
Glad it helped
Thank you so much for your video, it really helped me.
Glad it helped!
Thank you! got my remote working again
Glad I could help
Any idea why after programming new remotes, it only opens. Doesn't close. The wall button works fine.
Thank you the first method worked for me !
Glad it helped
Life saver! Thanks!
Glad it helped!
Great instructions! Thank you
Thanks for watching!
When you reset one does it reset the other house members too.
Thanks for your advice, I would gladly take it and be very happy, only thing is, I can't get in the garage cos the remote DOESN'T WORK!
Thank you very helpful
Glad it helped
Thanks dawg got her programmed!
Awesome!
Thanks a bunch man😁👍
Happy to help
Thanks. I was able to reprogram both our remotes.
And i had to replace a bulb as was going to put an LED one in, but now know not to use one here.
Glad it helped!
It was the new bulb causing our issues. We thought we could put any type of bulb in. Thanks alot!!
Thank you brother 🔥
Thanks for watching!
Thanks, very useful.
Glad to hear that!
What do I do if I don’t have access to the garage to hit the reset button on the opener?
Thanks! Easy fix.
Glad it helped!
Worked thanks 🙏
Good to hear
Thank you!
Liftmaster remotes are tuned to a frequency (mine is supposed to be 315mhz). according to information I found on the FCC website regarding this product it should not be off frequency by more than .1%. (315khz) Using an SDR radio I found mine was off frequency at 315.5 mhz (500khz off frequency). retuning it is very touchy but can be done.
How i can set up my 2 remoters as same time. Because i set up one then another one doesn't work.
Thank You.....
Thank you so much. Very helpful and easy to understand. My only issue now is I must be really close to the door to get it working. I changed the battery but the remote control distance issue remains
There should be an antenna on the motor on the ceiling. It's the yellow wire in this video freely hanging from the lampshade. Make sure it's out of the lamp cover for better remote coverage. Hope it helps.
My remote model is GDR-27 MLT. For me I pressed learn button once and then pressed my remote program button until it clicks. Then I randomly pressed and held the remote close and open button until the garage motor clicked and flashed. Once the motor recognizes twice, I pressed the button a third time and it finally closed and opened the garage door. My experience hope it helps
I need a battery for our garage door. Thanks dear🙏
Best of luck
@@Your-Self happy holidays 🎄
Great Info
Thanks for watching!
Hi I reprogram it work,but remote replacing the battery doesn't work,another remote is good.
Thank you 😊
Thanks for watching!
Thank you🎉
Thanks for watching!
Thank you.
Thanks for watching!
3 remotes with new batteries won’t work. Learn light won’t shut off after 30 seconds. Led bulbs have been removed. What do I try next.
The trick to reset worked, but only for 1 remote control (I tried several times). How can I reprogram both? Thanks in advance.
To reset everything, press and hold the yellow Learn button for about 6 seconds.
To program a remote, press the yellow button for 1 second and then press and hold the remote button for a few seconds.
To program the second remote, press the yellow button for 1 second again, then press and hold the remote button.
Thank you
Thanks for watching!
Perfect
Thanks
Thanks for watching!
My actual remote LEDs will not blink. And the battery is new. I have three garage remotes doing this. They work intermittently throughout the day. Sometimes I can press on it 50 times and the LED will not come on. Then all of a sudden it works fine for a few hours. Again, I have three remotes doing this.
Since LEDs don't blink, the problem is with the remote itself. It's just strange that all 3 doing the same thing. Possibly bad contacts... corroding inside... not sure.
i could not find the yellow to press in my garage
My up and down buttons are blinking
Have to wait for commercials to find out that it’s only battery that’s not the one I’m looking for
Patience my friend, lol.
If you watch the whole video, you'll see multiple possible problems with the remote not working.
Can u put your trash bin in backyard? It's nasty in garage!
shutup
🏮😅
Thanks
Thanks for watching!