I really enjoyed this video. Especially his thoughts at the end about 3-D printing a replacement intake. Too bad nobody’s come up with a viable solution. I have an aftermarket intake and have noticed some power loss. Not huge but enough.
I’m getting my silver 2011 merc painted glossy black soon. I took all crome bumper strips out because they were peeling a bit and I took the door panel guards off too. I’m thinking about just leaving it off for good, but I love how the bumper door guards help with getting dings in the parking lot. Plus, I’d have to get those silly holes they have there under the door bumper guards on the back passenger sides filled in etc.. anyone know where I can buy the side panel door bumper guards for the merc if I decide to put new ones on. I also replaced my air shocks and compressor, but I’m thinking of just putting reg shocks on. Any recommendations on what shocks are really good. Thank you 🙏
It depend on a few things, I wanted to used top quality stuff so my build is on the higher side. I have about $700-$800 in just new springs/shocks/struts and mounting hardware. Then another $1700 in brand new front and rear adjustable control arms and sway bars... so $2500? (I've never calculated it up before, sheesh) You don't need the latter to lift one, but I always advise using new suspension components when lowering or lifting a car. You could lift one on a budget for less than this but your outcome won't be as good in my opinion.
That is the absolutely fullest Merc trunk I've ever seen! Max packing density!
Silver birch metallic is a sweet color!! I have it on '05 MGM! Sweet lift on this!!
Clean car
💯
Thanks!
Love this
💯
Love the stance on this one.
Great interview.
Thanks 🙏🏼 it’s a cool build, I do have to agree
Thanks man, it has a very tight and smooth ride and launches off of speedbumps.
Got my headliner from Augustus for my P7b Good Vibes. Will be doing a marauder clone to my p7b too 🤩
💯
Appreciate you!
I have the same Amazon console thing and added a dual power outlet to the side using the cigar lighter power wire.
Im looking at a 2005 MGM and would love to do some similar modifications
I hope this inspires you!
Love the height and blacked out wheels. !!!
I really enjoyed this video. Especially his thoughts at the end about 3-D printing a replacement intake. Too bad nobody’s come up with a viable solution. I have an aftermarket intake and have noticed some power loss. Not huge but enough.
@@FredrickII thanks I appreciate the kind words. Definitely was a good time filming and hanging out. Cool car and cool owner!
I like how the old drive by cable cars actually hit limiter. Drive by wire ones just fuel cut and sound stupid when you rev them to 4k
Really sharp looking mercury Marquis how much are asking for it jks😂
Nice review and vehicle. When are you coming to film mine? 😉
My bad where do you live? 😉
@@LoveWhatYouDrive Utah up north.
@EnthusiastCarHangar lol 😂 man I thought Massachusets for some reason
@@LoveWhatYouDrive nope. Desert climate here even up north.
Winter you guys get pretty good amount of snow right? How’s the rust issues there?
From the pinstripe down I want to paint mine light blue.
I found a LCM in a scrap yard. Cost $9.00
@richarddoherty8090 steal deal
I’m getting my silver 2011 merc painted glossy black soon. I took all crome bumper strips out because they were peeling a bit and I took the door panel guards off too. I’m thinking about just leaving it off for good, but I love how the bumper door guards help with getting dings in the parking lot. Plus, I’d have to get those silly holes they have there under the door bumper guards on the back passenger sides filled in etc.. anyone know where I can buy the side panel door bumper guards for the merc if I decide to put new ones on. I also replaced my air shocks and compressor, but I’m thinking of just putting reg shocks on. Any recommendations on what shocks are really good.
Thank you 🙏
Also, great interview !
You can never go wrong with OEM Motorcraft, Bilstein, KYB or Sachs!
@@sawpitmotors thank you for the recommendations 🙏
What the lift run?
I’ll let Gus know to get in here and answer questions
It depend on a few things, I wanted to used top quality stuff so my build is on the higher side. I have about $700-$800 in just new springs/shocks/struts and mounting hardware. Then another $1700 in brand new front and rear adjustable control arms and sway bars... so $2500? (I've never calculated it up before, sheesh) You don't need the latter to lift one, but I always advise using new suspension components when lowering or lifting a car. You could lift one on a budget for less than this but your outcome won't be as good in my opinion.
R those wagon wheels on that mercury grand marquis 😂.
I think the front bumper may be gold ash metallic
Pin stripe sucks when you have to put on a new door.
It's a _real_ 2003 if it has black B pillars, remote fuel door opener, dash clock, map pouches in the front of the seats, under hood light, etc.
Yup, it's got all of that!