Відео

Beautiful Town Car.

Use the original gasket if it is in good shape. Make sure the plastic top of the filter is taken out of the hole. Sometimes they will stick in the hole. I am getting ready to change the transmission fluid in my 2005 Mercury Grand Marquis L.S. I installed a transmission cooler to keep the oil cooler and get more life out of the transmission. I am also getting ready to install an outside filter to keep the transmission clean.

6 Grand for that car and mileage is an absolute steal! Very good looking ride 👍

Nice 🚘

That's a overrunning alternator decoupler pulley on the alternator. The 200 amp alternators have to have one on them to keep from throwing the belt off on deceleration.

I hate that bodystyle

Definitely spend some money and get an alignment from a reputable shop. On my CVPI I always had a rear vibration that I thought was an out of balance wheel, then told probably a bent rim. Turned out the front was out of whack and caused the rear to vibrate. Smooth as silk now and they straightened my steering wheel position!

YO, Love !! That's a beautiful, and well-maintained ride, and an excellent highway cruiser. BUT -- I shouldn't "float" down the road -- A set of four (4) KYB "Gas-A-Just" shocks will make it ride and handle MUCH better than new. SAFER, too !! (Rock Auto). I've had excellent results with a complete WALKER Dual Exhaust system with Magna-Flow 2" Glaspacks. Straight-thru performance, without the nasty noise. 😁 I'd like to have those WHEELS for the famous 95 MERC !!

Are the pinstripes factory oem or is that a aftermarket detail added?

nice color

Loving the auntie sticker. Beautiful car - looking forward to James's future build.

Lovin' the sticker, your aunt did a nice job matching to the car!

Arizona Beige

nice vidwo

does nothing

so dont bother with this upgrade?

New cars do look like shoes. Best description Iv heard.

I have the same one in Gold Ash, wish it held up as good as the Red paint.

I'm a fan of your channel man! Great video! 👌

Bro how i can send a pictures of my black marquis I'm from Michigan

Just bought my 07 p71 1,000 bucks.110k miles.haules butt

I feel like you’re just guessing on torque specs. Not ideal. For the tensioner mounting bolt, 89 inch pounds (7.417 foot pounds).

Love what you drive I have a question for you

thanks for the video

this channel is amazing 🇺🇸

Great video Tfs the meetup

AWESOME, SO GREAT MAN. !!!!! THANKS....

I really would like to be there.

Oh man, that adapter harness irks me. I got the exact adapter I needed for $7 amazon. Im all for cleaning up a rats nest, not adding to it or creating one. I was unlucky enough to learn the seller hacked off my factory connector, instead of doing it the right way. If you had went with a full size double din unit, you absolutely would’ve wanted to return that spaghetti adapter and pick out a single pigtail adapter.

Biggest killers of these and every other car is the discontinuation of oem parts..these dont have the following of a mustang or corvette so many parts for these cars arent made by aftermarket companies so when something is broken or doesnt work correctly your only option is to live with it or find it on ebay or somewhere else and once nobody is selling a pulldown motor anymore or a door weatherstripping, your screwed and gonna have to live with it. Hate that. Got a gorgeous black on black 2010 town car sig limited and i have bought alot of new from motorcraft parts and alot of used ones as well. Time will come where everything will be used and then after that you wont be able to find what you need at all no matter what it is. Sometimes i had to contact guys parting out with their town cars selling it for parts and have them remove an item i need and ship it to me. If your like me and keep your stuff in pristine condition its gonna be tough. Could be 5 years, could be 10 or 20 but eventually it will happen.

On the subject of the coil spring conversion, the reason you hear so many different opinions is because replacement springs are never the proper spring rate. Often they are too stiff, leading to a harder ride. Sometimes they are fine. If you want to maintain a factory smooth ride, I'd go with some factory rear coil springs out of an '80s Town Car. MGM or CV springs would also likely work, but may sit a bit lower than Town Car springs. The only reason the air suspension rides better than typical overly stiff replacement coils is because of the difference in spring rate.

Now you gotta come to vegas and get a video of mine 🤣

So you took all cats out ?

I would put a spotlight back in it. I used to go to etisford and look up every option a car had by the vin number. I don't know if you can still do that. My 07 is almost 145K and my 11 just hit 148K. Factory air bags were 2FAFP71 and extra side air bags were 2FAHP71.

your lcm is out lcm is out it is under the dashboard

Damn thats a beautiful vic!

Ford went to the 17 inch steel wheel in 2006 on the CVPI.

I really enjoyed this video. Especially his thoughts at the end about 3-D printing a replacement intake. Too bad nobody’s come up with a viable solution. I have an aftermarket intake and have noticed some power loss. Not huge but enough.

Problem spent all his money replacing every 20 year old deal and gasket to replace a ticket light bulb

UFO Interceptor LoL

We're rolling out looking for America's greatest Panthers! After seeing the sticker on the back driver window I had to say that.

Those seats were an available option. More than likely a detective or supervisors car if it was ordered that way. I see back doors work from inside meaning not patrol used. (Knobs remain). Very rare find and sought after seats but definitely factory!

love my 89 its my living room on wheels my piece and quite time mine is 189,000 miles .

P71 sap seats or cv lx

And 2005 is the only year with the new steering wheel and old cluster

P71's did not have 17's until 2006