I’d love to have a separate assembly table; I’ve always used my workbench. Your design gives me some good ideas-especially since I’m just getting into T-tracks’ varied utility. Thanks!
I need to make an out feed table for my workshop in progress. This one you made is awesome! I just worried about your hands watching you rip the lumber to milled size! Of all the tools in the shop the table saw makes me the most cautious, since accidents can happen so quickly.
Hey I like your bench, I need to build a new one, my first was one.. well my first one, its a bit bendy and was built with what I could source during covid. My 2nd one I think will be like yours. I like your channel, and you appear to have heap of experience I can learn from. BTW your voice overs are very clear but come over robotic also have a no sound gap when you swich back to workshop audio.. a bit odd. Like your channel. Subscribed
Thanks for the input, I had lost my voice and couldn't talk without hurting so this was the best option. Thanks again for watching and subscribing I sure appreciate the support.
No not on aluminum tracks, if you are planning a lot of cuts maybe use an old blade . And thank you for the comments and watching, I sure appreciate it
I actually got it from Home Depot online, free delivery too. Thanks for watching Chris I sure appreciate it. If your not subscribed I would appreciate that too!
here ya go www.homedepot.com/p/Hampton-Bay-6-ft-L-x-39-in-D-Unfinished-Hevea-Butcher-Block-Island-Countertop-in-With-Standard-Edge-THD-HBU-0003/319764601
If you're not in a hurry Keep checking because I have seen them sold at all different pricing depending on how many in stock. Be sure to check the local stores also because when they get a big pile of them they put a sale price on them. @@jasonvera2269
The free plans usually go fast so you might want to be sure an subscribe then click the notifications bell so you are notified as soon as a video that me have plans is posted.
Build Cost:
4x4x8 Post Legs: $36.81
2x4x8 Pine Framing: $26.00
4x8x3/4" Plywood Lower Shelf: $49.88
39x72x1 1/2" Hardwood Island Top: $163.00
Adjustable Casters: amzn.to/3Zac1VV
Adjustable Feet: amzn.to/3ZuH52o
48" T-track: amzn.to/41AueNU
Watco Natural Danish Oil: amzn.to/3xZB6Hk
Minwax Paste Wax: amzn.to/3YhcK6u
Self Centering Drill Bit: amzn.to/3Y6s7P6
3/4" Forsner Bit: amzn.to/3mftvBJ
Misc, screws, glue & Finish: $16
Total Build Cost $348.67
Plans: iliketobuildstuff.org/product/out-feed-assembly-table/
Love this out feed table. We'll built sturdy and square. Take time checking cuts squareness ect... build goes so much better. Thumb 👍
Thanks for watching I appreciate it!
Great video, really glad I found your channel. As a fellow Arizonan (Tucson), WELCOME!
Hey Thanks Shane I appreciate it! I get down there from time to time. Thanks for Subbing and supporting the channel!
Love the shirt logo
That table is a good design!
Thank you Jason, I appreciate that
I’d love to have a separate assembly table; I’ve always used my workbench. Your design gives me some good ideas-especially since I’m just getting into T-tracks’ varied utility. Thanks!
Thanks for stopping by Delia, I sure appreciate you watching and commenting, it means a lot!
I'm putting my new shop together now. I'm not ready for an outfeed table yet but it's coming together.
Thanks for stopping by and be sure to let me know how your new shop is going from time to time
I like this simple design. Love the t-shirt
Thank you Todd! 😊
Tee shirt looks amazing. The work table is something I need for my small shop. Thanks
Thanks for watching Lance I appreciate it!
I have yet to build my shop table, and this like it would be a great addition. Always enjoy watching your next build
Thanks for watching Guy I appreciate it!
Love your channel and your content. So glad I found your channel. Subscribed!
Awesome! Thank you Ron!
Great video I am going to build one of these soon! I like the size you did.
Thanks for watching and commenting I appreciate it!
Love the build. I plan on building the same.
Thanks Jason
I love the bench, I need a smaller one but it would be a great addition to my shop
Thanks for watching Tabatha, I appreciate it!
Great outfeed table Cheers
Thank you! Cheers!
Nice bench i think i will make one just like it but also add a spot that i can out my tabke saw in.
There ya go, Send a picture of it when your done. Thanks for watching!
Unique bench!
Thanks for watching Chris I appreciate it!
I like the layout. I need to build a smaller version to fit in a one car garage along the same wall as my table saw so I can still park there.
Been there! Maybe you can send me Pictures when done, would love to see it.
Awesome build
Thanks Rick!
Very nice work bench. Top is supper nice, great job. Hilton
Hi Hilton, I did not have to scrape the top but a couple small places, it was extremely flat. Thanks for watching!
I need to make an out feed table for my workshop in progress. This one you made is awesome! I just worried about your hands watching you rip the lumber to milled size! Of all the tools in the shop the table saw makes me the most cautious, since accidents can happen so quickly.
Thank you, I appreciate that. Yeah I agree and if anything every feels awkward or not sure of I will find another way.
Hey I like your bench, I need to build a new one, my first was one.. well my first one, its a bit bendy and was built with what I could source during covid. My 2nd one I think will be like yours. I like your channel, and you appear to have heap of experience I can learn from. BTW your voice overs are very clear but come over robotic also have a no sound gap when you swich back to workshop audio.. a bit odd. Like your channel. Subscribed
Thanks for the input, I had lost my voice and couldn't talk without hurting so this was the best option. Thanks again for watching and subscribing I sure appreciate the support.
@@ILikeToBuildStuffWow, well it worked a treat. Good on you.. cheers
Would I need to use a metal cutting blade on the chop saw to cut the T-track?
By the way, I really enjoy your videos!
No not on aluminum tracks, if you are planning a lot of cuts maybe use an old blade . And thank you for the comments and watching, I sure appreciate it
Where did you get the top? Seems like a great price!
I actually got it from Home Depot online, free delivery too. Thanks for watching Chris I sure appreciate it. If your not subscribed I would appreciate that too!
I might have missed it, but where did you buy your hardwood island top?
I did it online through Home Depot, excellent price and free delivery to the shop
Hello. I like to build stuff too 😊
Thanks for visiting Yo Ya!
Where did you get the butcher block table top at? I didn’t see the link in the description.
here ya go www.homedepot.com/p/Hampton-Bay-6-ft-L-x-39-in-D-Unfinished-Hevea-Butcher-Block-Island-Countertop-in-With-Standard-Edge-THD-HBU-0003/319764601
Thanks man. Yikes looks like the price went up a little bit
If you're not in a hurry Keep checking because I have seen them sold at all different pricing depending on how many in stock. Be sure to check the local stores also because when they get a big pile of them they put a sale price on them. @@jasonvera2269
Ok thank you for the heads up. I’ll do that.
First25
The free plans usually go fast so you might want to be sure an subscribe then click the notifications bell so you are notified as soon as a video that me have plans is posted.