Відео

You ever made mistake building a face frame?

Thank you for making this video

Thanks

Great video. Been searching for this, as all the others are for 240v. I had an electrician tell me to connect both black and white to each line terminal, but I am using 20a single pole and 120v system like you, and I didn’t think that’s correct. Question though is where does the white wire connect inside the breaker panel? To the common neutral rail, where all the others in the panel go, or on the ground bus? Sorry if a repeat, but I searched all the comments and didn’t really see an answer specifically unless I missed it.

Is the full video somewhere ?

I like it too. I have one 46” I am having an issue getting the thin silver pole into both legs. I get them In and they are all the way in but, the hand crank won’t turn. I take the pole out, the hand crank turns great. I wonder if the pole ends are not fitted into the hexi sides correctly. I did it over and over today. Still hand crank to raise table does not turn. Strange.

I like to build stuff too. I love to use my CNC equipment to assist in my stuff.

Any issues with the hinges over time? Have a link for those?

Good video thanks, but to make it perfect i would have liked to see when you connect your vacuum pump and open the valves, then probably close the valve, then disconnect your vacuum pump, then open your 2 upper knobs to release the gas in the line, then open the valves on the lines??? everything up tho that part of the video was perfect, but you skipped some steps in your video, that makes me need to check other videos when they connect , syphon, and open or close which valves etc. excellent useful , confidence building video otherwise.

Brilliant job. Thank you from Neil, England.

You doing a great job

Neat kit! It's worth mentioning though that this should NOT be installed in a rated firewall.

www.homedepot.com/p/Commercial-Electric-In-Wall-Power-and-Cable-Kit-White-DIPWRW-K/328447850?MERCH UGREEN HDMI Switch 5 in 1: amzn.to/3WiC1z6 home theater power: amzn.to/3WfswRa Stud Finder: amzn.to/4288DPQ

Great video. Straight to the building without fiddling around. I will be using your design to build me a couple of those doors later in the year. Thanks!

Thanks for simplifying the instructions on how to build a quality outfeed table/workbench.

Great video thank you!

This is one of the most underrated YT DIY channels. One will find amazing tips and ideas. The host is awesome.

Nice and simple. I'd flip that top diagonal the other way around (and cut them a little differently) - you want all that pulling down weight from the open edge of the door to transfer into the hinged side of the door (like your lower brace) rather than pulling from the hinge (like the top brace). Hope that helps.

Nice shirt!

What kind of maintenance have you had to do other than clean the filters? I've heard they could possibly get moldy inside. I'm thinking about installing this brand in a 4 Zone. Any problems since the install 4 years ago? What were you cooling with before this mini split?

Reading the instructions before installation is a sign of intelligence. I have watched so many roofs that were done incorrectly... And they call themselves roofers with 20 years of experience.. Respect to the author of the video for the correct approach to the matter.

Just take that drill you got sitting on the ground and crank that height adjuster. Easy peasy.

I love the build and thank you for sharing! Happy Holidays 2024

I would hinge to a jamb not to the framing, so that future adjustments are easy to make when it starts shifting.

Are they still working well?

Great video, but we don't know how to get the cover off to get the wiring harness connected

Learn how to make it yourself with all details. Just look for WoodPrix :)

Would be helpful to show how you make the tight bends , probably the trickiest part of install!

MINI SPLITS ARE RETARDED LOOKING.

When you hook the vacuum hose to the low pressure pipe, there is another part between the end of the vacuum hose and the backside of the low pressure valve. What is that part? I don't believe I see it listed below. Thanks for the video. It's given me the confidence and the steps I need to do this.

This is what I was looking for!!

Do u know if this thermostat also work with the senville cassette mini split?

Very helpful thank you sir🙏🏿🙏🏿👏🏿👏🏿💪🏿💪🏿✊🏿✊🏿

I brought my 2nd Anran CCTV not long ago but. Thiis time i thought i would go for the solar one. After setting it all up and even fitting it on the wall it all worked out fine.Just to then find out it was not charging at all even with the charger it came with. I like Anran camera's still though.

What wood did you use for exterior? Concerned about water damage?

Noooo 8.96 each? For 2x4 That can't be right it's usually about a third of that

what do you use to mock it up? blender?

May want to add a clip/comment on when you end/finish a row and there is less than 6" (a tiny piece) It's great to start the way you did, but you have to pay attention to the other side. Also, you may want to mention when you finish at the ridge... and having a small amount there... and how you can use a story pole to get it just right instead of having 3 or 4 inch area remaining..... Overall, looks good thumbs up

Can I use the power that is already outside for my old ac unit that I am removing

Thanks for making the video, but you said almost NOTHING about the cameras themselves. You showed a very short clip at the end of the video, but you didn't demonstrate how sensitive the motion detection is, you didn't say how long they record once motion stops, you didn't say how the night vision was, you didn't say how long the delay is between events and notification... I could go on and on with what you didn't cover. Do you have another video (or planning to make one) that covers these things?

Are there any mandatory monthly charges or subscriptions for anything?

looks just like the Eufy brand

Hi myself because not all areas where I want a camera can get the sunlight so I don’t like that the solar panels are attached. I like when they have a wire so you can put the solar panel anywhere where I can get this soon.

untill I see the night vision , how do we know if it is good

The only issue I see is that it only has a 64gig micro SD card. If that is the largest that it can handle, for me that would be a problem. I would prefer to put a 256gig or maybe a 1TB card in its place. Do you happen to know if a larger SD card can be installed?

Resistant to hacking? Can't work if under the eaves.

24% OFF Right Now at amzn.to/4efJkhh

Nearly $9 for 2x4? I paid ~$2.50/ea yesterday, and even Lowes price is under $4.

It's a yr on since you mafe this video and only 1 comment? Perhaps your video technique might be lacking, (ie) can't hear you. Hope it's improved. 😉