SUPER CLEAN Your Dirty Engine Parts And Make Them LOOK NEW!!
Вставка
- Опубліковано 4 сер 2024
- Cleaning and degreasing my Land Cruiser's dirty transmission and engine bay and making them look brand new! Today I completely degrease the filthy transmission and get it literally spotless using Super Clean degreaser and aerosol spray. This stuff works great for deep cleaning auto parts including engines, transmissions, axles, engine bays, etc and will melt off all the grease and grime! Now I can service this transmission, fix the leaks, and install low range gears in the transfer case without being covered in oil, grease, and grime! @SuperEasySuperFast
Follow me on Instagram:
/ _rmgarage
Links to Products Used in This Video:
Super Clean: amzn.to/3Ub46UY
Foaming Super Clean: amzn.to/3BcwnE7
My Pressure Washer: amzn.to/3VU72GZ
Camera Equipment:
Sony ZV1 Camera: amzn.to/3VX5koq
Rode Microphone: amzn.to/3He5Eux
Lens: amzn.to/3VYL0TD
Tripod: amzn.to/3BcYiDL
Other videos from this Land Cruiser 80 Series build!!
► Full playist: • 1993 Toyota Land Cruiser
► Restoring an Old Wiring Harness: • Restoring My OLD Wirin...
► Full Engine Teardown EXPLAINED: • Toyota 4.5L Inline 6 E...
► 1FZ Bottom End Teardown: • INSIDE A 230,000 MILE ...
► FZJ80 Engine Removal: • Removing My Land Cruis...
0:00 Intro
0:30 The Dirty Transmission and Engine Bay
1:36 Prepping the Transmission
2:55 The Degreaser I'm Using
4:08 Cleaning the Transmission
10:09 Final Results, Unbelievable!
10:46 Engine Bay Cleaning
12:49 Engine Bay Final Results
#toyota #diy #howto #landcruiser #rmgarage #cleaning #4x4 #offroad #auto #automotive - Авто та транспорт
It’s a Saturday morning, having a cup of coffee and staring at my DD 91 LC and my newly acquired 94’ LC train wreck and looking for inspiration. This is certainly the right channel. Your hard work and well sorted efforts are appreciated.
I need to remember this the next time I'll clean my car - remove the engine, spray it down and reinstall. :')
“I’m not looking to make it perfect” makes it look perfect!😂
That Transmission Came Out Super Clean! 💯
Who ever installs a dirty part should never touch another vehicle ever
I'm glad you have alot of time and money. I will send you my info, you can send me some.
Amen!!!
Yes, I love my Brother but he does sub-par work. Now I get to undo it. Bracing for the challenge. It's bad.
Correcto moondo
Shockingly clean! Didn’t think there was any hope for that transmission grime 😂
Subbed! Fellow Toyota guy here. I’m in the midst of rebuilding the engine and trans in my 2000 Celica GT-S. Going to use this method to clean all the oil grime up. Thanks!
Sweet!! Thank you!
great work. I'm humming along with you and my 94, built the harness like you as well with tesa and all that, thanks for the recommendations. One thing I am doing is having the steering box rebuilt with the 105 sector shaft. Common failure when offroad
I have that on my build list!
Don't let perfect be the enemy of 'done'...
Awesome job, I’m sold on Super Clean!
Thanks man!!
I did the same with my mitsubishi eclipse. I also used two detail brushes just to get the spots that are hard to get
Great video Ricky, such a satisfying job - and even to watch! Does the Super Clean come with the sick goggles too>! :D ;) Stacey and I both were like, "wow those fenders are green!" lol
Haha. I put them on because I kept getting grease water in my eyes. Lol! Thanks guys
awesome work
You should be fine to support the trans on the pan, just use a block of wood in between the jack (according to the FSM).
amazing video good job
May as well replace all your pressure sensors on the transfer case now too. They go bad and cause your CDL to not engage. There's lots of info on mud about it. Love the vids👌
Super clean!
Good work man! Looks so good
Thanks Clinton! I’m surprised how well it came out!
nice work. Is your pressure washer hot water or cold? Is it a hi pressure or is it a cheapo model like mine?
Looking good! Is it possible to leave the lines and cap? That way you can easily hook back up in future if need be. Keep up the good work!
I like how you’re thinking. Future proof it just in case. I’ll do that!
If you ever do this again I would try to get a pressure washer with a heater and get the temp of the water to 180 degrees melts oil pretty good
Definitely will try that!
Which do you think works better? Liquid or foam?
New subscribed from Somalia
EPA will be visiting soon I bet 😂
Your my hero
I'm in trouble a little bit with my newest project. OCD. IT'S GOT TO BE CLEAN!!!
Nice work! what kind of pressure washer are you using?
It’s a sunjoe spx…something, maybe spx3000?
Make a little stand to hold the transmission up. Craft it out of 2x4s
Super Clean ! I needa do this for my 80 cuz my front main seal has seen cleaner days 🤣
We’re doing a giveaway for it!
@@RM_Garage hook it up! 80 series gang gl to me
@@1995Kakashi check out the giveaway post on Instagram! @_rmgarage
Would you like to tell me the name of this degreaser because am from Pakistan
Should look into at wits end rear heatee delete plate
I have looked at it!
Just use starting fluid. Spray on .watch it do its magic
😮😮wow
I wonder what all that cleaner did to his lawn.
Just use a hot steam pressure washer. No materials required. That's what they use in UK before they do bus/truck/lorry mots.
Might get one in the future. Have you seen the method they use to freeze and chip off the grease? Looks pretty interesting.
I'm thinking a 3000 psi pressure washer would do a much better job maybe even get a jitterbug nozzle
Why didn't use brake cleaner is the fastest cleaning agent!? ✌️
If I had cleaned it like you, only here in Germany, I would certainly have gone to prison - environment 😂🤦🏼♂️
But, Great Work!🎉
Use a cherry picker or what u call engine hoist
After just a wash : For sale fully rebuilt 6000$ 😂😂😂
Ha! I bet people do that too
imagine having a real pressure washer u wont need second pass
next time use heavy duty stove/ oven cleaner
Use a brush, do not use too much water
Be careful it will eat rubber .
Bro you need a better brush...
But it worked! Haha
God almighty...who has the time for a project like that?!
UA-camrs. Lol
Get a better nossle
Doesn’t look so amazing.
try with EASY OFF on SPraY, and u tellme
These are not good degrease. They are not working at all. Good degrease should instantly dissolve the grease without pressure wash or brush wash.
😂😂😂 tell me youve never cleaned greasy 20+ year old car parts without telling me youve never cleaned greasy 20+ year old car parts, it never works like that, and what this guy had to clean was cake compared to some of the stuff ive seen and cleaned.
Uh, okay kid.
@@Initial_Gopnik Amen!! 25+ years old grease and grimes are a pain in the butt to clean it squeaky clean.