Took me fifteen minutes to clean mine, removed it & disassembled it & cleaned it properly, also got to see what makes it work, no cost but a little bit of brake clean & and gained an understanding of how it comes apart.
I'm having hard idle coming to a stop at a red light. The engine will rumble then die. When putting it in reverse the car 100% of the time shakes violently and dies. When I come to a stop i have to quickly put it in neatural for it not to shake and kill the engine. I'll raise the rpms in neatral and buck myself in Drive in order to get the car to move forward. Mid speed and accelerating the car feels normal. Startign up the car warms up like normal too. I think the last thign i need to do is try replacing this idle air control and it should fix it. Thumbs up from me so far.
@@HomeOwnerRepair Nope no check engine light on. I have reduced the problem to my transmission oil levels being dry as a dessert and i would need a drain and fill. Ive read that for older cars you dont want to flush and fill because the gunk creates enough friction? Therefore flushing it clean completely would cause slipping? Its a hyundai Elantra 2008 at 190,000 miles. I never got the transmission oil replaced. When i turn the car on to move it i can smell the engine roasting it lets out a bit of smoke and steam. So I figured i can have JiffyLube drain and fill and replace my Transmision oil filter as well! Ill update when i get around doing that lol
The idle speed of my 2008 hyundai accent era 1.6 select model vehicle is around 600-650. I don't know if it is right to be at this value. There is a partial up and down movement in the idle. I removed the idle motor and cleaned it. It seemed to fix it but it is still the same. Please help me
Me too i changed that part and my accent 2008 run OK but my idle is a bit low ,so, is it my idle adjustable by a kind of screw that made to give a little more idle ? If yes ,do you know where that screw is situate ? Thank's in advance if you have an answer . Cheers .
Good morning, a question when the idle speed does not work by starting the engine for the first time from one day to the next and during midday, could the cause be due to the ambient temperature and low sun? or is it the cause of some problem?
How's the valve been holding up? My 2010 has been having issues with stalling when idling so I was looking at this direction to try and diagnose the problem
I have a 2009 Hyundai Elantra GL. I changed out the ICV and still have high idle. Once I drive for awhile, the RPM comes down. My small car is horrible on fuel. No engine light or codes on the Diagnostic Test.
It may also be the camshaft position sensor. Both of these went on my Hyundai and when I replaced both the car was all set. The cam shaft sensor was giving me an erratic RPM on the highway.
I seem to be getting worse gas mileage since I switched. It's costing me 14 litres per 100 km and it's mainly city. The air filter is changed, changed the plus and wires last summer, changed thermostat, oil is new. There are no codes. No lights on. I have tried fuel injector cleaner and still no changes. Tires are good, aliment just done. Maybe a dud. I have it like this for 2 yrs.
Mine wont start unless i hit the gas and it will not idle unless the gas pedal is being pressed. I smell alot of exhaust and stuff outside the car im at a loss because i changed all kinds of stuff and nothing has helped
Hello, I have a 2007 Kia Spectra car, and I have a problem with instability rpm I changed the valve more than once, and the same problem sometimes goes up and sometimes goes down. I checked everything and cleared the fault code, and the same thing. Please help.
Hi, I changed for a new ICV. When I plug the new one in, my car idles at high rpm like if I had it unpluged. Why is that? I bought the right part. I would like to know you guys opinion on it. It is a hyundai accent 2009.
I have the same problem on my 2011 Accent. Did you buy a new IAC from the dealer or from any auto parts store. I live in Canada and only one auto parts store has it and it costs $320 Canadian. Was it that expensive there? Thanks.
I have the same car, 2010 Hyundai accent and I’ve changed battery, position senor, ignition coils, plugs , and fuel pump and filter and it still tries to start but won’t ! Any help would be greatly appreciated!!!!!!!!! Help in Mississippi
Usually not unless it gets really really bad for some reason. If the check engine light is on you may want to have the code pulled to see what it is pointing to.
Took me fifteen minutes to clean mine, removed it & disassembled it & cleaned it properly, also got to see what makes it work, no cost but a little bit of brake clean & and gained an understanding of how it comes apart.
Thank you for watching our auto repair video that shows you how to replace the air idle control valve on a Hyundai Accent.
Have a question? Subscribe to the channel, leave your comment let us know you subscribed and I will reply back to you.
I'm having hard idle coming to a stop at a red light. The engine will rumble then die. When putting it in reverse the car 100% of the time shakes violently and dies. When I come to a stop i have to quickly put it in neatural for it not to shake and kill the engine. I'll raise the rpms in neatral and buck myself in Drive in order to get the car to move forward. Mid speed and accelerating the car feels normal. Startign up the car warms up like normal too. I think the last thign i need to do is try replacing this idle air control and it should fix it. Thumbs up from me so far.
My lord my car is doing the same thing and I’ve changed it all nothing has helped
Is the check engine light on?
Is the check engine light on?
@@HomeOwnerRepair my check engine light doesnt work 🙄 but u can read the obd and get the codes off it
@@HomeOwnerRepair Nope no check engine light on. I have reduced the problem to my transmission oil levels being dry as a dessert and i would need a drain and fill. Ive read that for older cars you dont want to flush and fill because the gunk creates enough friction? Therefore flushing it clean completely would cause slipping? Its a hyundai Elantra 2008 at 190,000 miles. I never got the transmission oil replaced. When i turn the car on to move it i can smell the engine roasting it lets out a bit of smoke and steam. So I figured i can have JiffyLube drain and fill and replace my Transmision oil filter as well! Ill update when i get around doing that lol
The idle speed of my 2008 hyundai accent era 1.6 select model vehicle is around 600-650. I don't know if it is right to be at this value. There is a partial up and down movement in the idle. I removed the idle motor and cleaned it. It seemed to fix it but it is still the same. Please help me
I believe that idle RPM should be accurate. It shouldn't fluctuate all over the place though.
The fluctuations only occur during idle RPM. There is no problem when I am on the road. Is it possible that the idle motor is defective or others?
Hi I have a Hyundai IMAX. I need to replace the actuator assy idle speed . We're is the best place to buy one ?
You may want to check Amazon...hope this helps you out.
Me too i changed that part and my accent 2008 run OK but my idle is a bit low ,so, is it my idle adjustable by a kind of screw that made to give a little more idle ? If yes ,do you know where that screw is situate ? Thank's in advance if you have an answer . Cheers .
Not to my knowledge. Mine idles around 500-800 rpms...Tiny motor
Good morning, a question when the idle speed does not work by starting the engine for the first time from one day to the next and during midday, could the cause be due to the ambient temperature and low sun? or is it the cause of some problem?
It may be acting up as it heats up and cools down. I replaced mine and it wasn't that expensive.
How's the valve been holding up? My 2010 has been having issues with stalling when idling so I was looking at this direction to try and diagnose the problem
It has been fine
I have a 2009 Hyundai Elantra GL. I changed out the ICV and still have high idle. Once I drive for awhile, the RPM comes down. My small car is horrible on fuel. No engine light or codes on the Diagnostic Test.
It may also be the camshaft position sensor. Both of these went on my Hyundai and when I replaced both the car was all set. The cam shaft sensor was giving me an erratic RPM on the highway.
I seem to be getting worse gas mileage since I switched. It's costing me 14 litres per 100 km and it's mainly city. The air filter is changed, changed the plus and wires last summer, changed thermostat, oil is new. There are no codes. No lights on. I have tried fuel injector cleaner and still no changes. Tires are good, aliment just done. Maybe a dud. I have it like this for 2 yrs.
Mine wont start unless i hit the gas and it will not idle unless the gas pedal is being pressed. I smell alot of exhaust and stuff outside the car im at a loss because i changed all kinds of stuff and nothing has helped
Hello, I have a 2007 Kia Spectra car, and I have a problem with instability rpm I changed the valve more than once, and the same problem sometimes goes up and sometimes goes down. I checked everything and cleared the fault code, and the same thing. Please help.
That same thig happened to this car, ended up being a bad camshaft sensor
I use Kia Rio 08 I don’t knw if d gasket Is suppose filter d air coming to the valve from the injector
We currently do not have an auto repair video on this particular repair. Have a great day!
Hi, I changed for a new ICV. When I plug the new one in, my car idles at high rpm like if I had it unpluged. Why is that? I bought the right part. I would like to know you guys opinion on it. It is a hyundai accent 2009.
Wondering if the part is bad. Is it throwing a code you can pull?
thank you
You're welcome
You're welcome
Hello how to relearn the idle after throttle cleaning
I didn't need to do a relearn procedure when I replaced my air idle control sensor.
Can the iac valve cause car to lose power when running ac?
You may loose a little power in general when the IAC is bad. When the AC is turned on it might rob even more power.
@@HomeOwnerRepair well my car def loses power when I turn the ac on and drive..so I try not to run my ac as much as possible
I’m having the same problem with running my ac
I have the same problem on my 2011 Accent. Did you buy a new IAC from the dealer or from any auto parts store. I live in Canada and only one auto parts store has it and it costs $320 Canadian. Was it that expensive there? Thanks.
I bought it on Amazon. Here is a link to it. amzn.to/3QSlNra
@@HomeOwnerRepair Thank you very much for the prompt response and help, I appreciate very much. I shall get it from here as well.
Just go to a junk yard to get a used one I got to Pick and pull they are in canada I am in calgary and can get the part for less then 10.00
Were is the iac valve located on a 2013 kia soul 1.6
I currently do not have a video on this particular repair. I'll keep this in mind in the event that we have to do one of these in the future.
My Accent shakes at idle. Is it idling too low(750 rpms)
You may want to see if a motor mount is broke.
Nah mines is shaking violently as if it wants to run out of gas
I have the same car, 2010 Hyundai accent and I’ve changed battery, position senor, ignition coils, plugs , and fuel pump and filter and it still tries to start but won’t ! Any help would be greatly appreciated!!!!!!!!! Help in Mississippi
Is the check engine light coming on?
@@HomeOwnerRepair I fixed it! It was crankshaft sensor!
U scanned and error appear for this case?
Yes, I was getting a Code P1508
What if you change it and it still come on after you change it and you still have the same code po508
Did you try clearing the code?
I change mine but my rpm still bouncing a little bit when the engine is heated up
If you still have a check engine light pull the code and see if it is a new code and what is is pointing too.
so much cheaper on Amazon compared to a parts store I'm waiting for mine to come in the mail
I buy as much as I can off there. Hope this video helped you out.
Will it make my car to crank not to start
Usually not unless it gets really really bad for some reason. If the check engine light is on you may want to have the code pulled to see what it is pointing to.
تغير الحساس هلا في رقم معين لاو مافي اشاكل
Thanks for watching
Is it in 2013 model ؟
We currently do not have an auto repair video for that particular model year.
I can tell by the accent you live near me
Mass
New Hampshah!