When installing, use the wire harness to connect the two headlights to the positive terminal of the battery. After the installation is completed, you need to close the engine cover and all doors, lock the car with the key and then unlock it again. Then the daytime running light will work. The daytime running lights will not turn on until the turn signal flashes twice, because the daytime running lights require a double flash signal and cannot be turned on directly with the light switch.
If you have the LCI model (2008-2010) then you don't need halo rings, you can swap out the halo bulb to a led one, I put red led for my halo ring. Then swap the hid for a 6000k hid. And the yellow eye brow bulb can be swap too. I believe it's a led strip, I think I had to swap it out or resolder the yellow diodes for white ones or it was a tiny bulb. I don't remember
Is there anything I can do for Halogen bulbs? I have a 2010 528i, ironically it has most options *except* xenon headlights. Every LED and headlight upgrade says it’s not compatible with my halogen headlights and it’s been really aggravating…
Good question, this is what I found on their website: When installing, use the wire harness to connect the two headlights to the positive terminal of the battery. After the installation is completed, you need to close the engine cover and all doors, lock the car with the key and then unlock it again. Then the daytime running light will work. The daytime running lights will not turn on until the turn signal flashes twice, because the daytime running lights require a double flash signal and cannot be turned on directly with the light switch. If the daytime running lights do not go out, it is usually because the hood/door/trunk is not closed.
😍 in love with those headlights
yeah those laser lights with blue details are on top!
the no.1 is plug and play?
When installing, use the wire harness to connect the two headlights to the positive terminal of the battery. After the installation is completed, you need to close the engine cover and all doors, lock the car with the key and then unlock it again. Then the daytime running light will work. The daytime running lights will not turn on until the turn signal flashes twice, because the daytime running lights require a double flash signal and cannot be turned on directly with the light switch.
ako si urobil svy svietili aj svetla do zatačky sucasne zo stretavacim svietenim?
coding
Are the second ones plug and play ?
if you're talking about h7 led bulbs, then yes. Make sure they are 'canbus' to avoid fault codes.
Sorry if I'm asking a stupid question. How do you know which size halo rings to buy?
Usually the product page should state for which model are the halo rings suitable for.
If you have the LCI model (2008-2010) then you don't need halo rings, you can swap out the halo bulb to a led one, I put red led for my halo ring. Then swap the hid for a 6000k hid. And the yellow eye brow bulb can be swap too. I believe it's a led strip, I think I had to swap it out or resolder the yellow diodes for white ones or it was a tiny bulb. I don't remember
My model is 2005, I ended up buying new headlights 😅
Is there anything I can do for Halogen bulbs? I have a 2010 528i, ironically it has most options *except* xenon headlights.
Every LED and headlight upgrade says it’s not compatible with my halogen headlights and it’s been really aggravating…
LED H7 should be compatible, just make sure they are canbus so you don't get any errors on the dashboard.
Thank you for the suggestion, is that what I should search? LED H7’s?
@@ryu411 Yes, I can recommend these. They should be plug and play. amzn.to/3MvQy5a
@@HarisCars I’ll check them out, thank you!
Do you have to run wire from positive terminal to headlight wiring for drl to work? For the g30 aftermarket headlight
Good question, this is what I found on their website:
When installing, use the wire harness to connect the two headlights to the positive terminal of the battery.
After the installation is completed, you need to close the engine cover and all doors, lock the car with the key and then unlock it again. Then the daytime running light will work.
The daytime running lights will not turn on until the turn signal flashes twice, because the daytime running lights require a double flash signal and cannot be turned on directly with the light switch.
If the daytime running lights do not go out, it is usually because the hood/door/trunk is not closed.
Its work on Bmw E63 ?
not the same headlights
They look nice, but unfortunately, if LEDs gonna stop working, you can throw it to trash, not worth the price.
always keep a pair of your OEM headlights, just in case!
@@HarisCars sure do, but they could make them with replaceable bulbs.
local eletrician guy can fix it for small amount of money ^^
Добра музика 😂