@@26zilence wasnt talking about records, look into nz's rota scene its crazy big over here not to mention we were the first to create the 6 rotor engine. i recommend looking up REunion to see what i mean about how big nz are on there rotas. PPRE are known all around the world for there rotary builds people like rob danm and mad mike can vouch for that...
There are two actually ! Len Bacon and Mike Jtineant. Incredible cars. Both getting some much needed rear end strengthening work right now. Mikes car has been on the fueltech usa UA-cam channel before (red FD)
I've only seen Len Bacon's car so far, and it really made me appreciate it for what it is! Just seeing it get out of the hole on a standard diff (I think!) and skate it's way to a bloody good number, just makes me happy for the bloke!
@@BecauseRacecarOfficialline Lock and two step ?? I've just built a 500 HP manual car I haven't taken it to the strip yet because I haven't got a line Lock and two step set up I assume getting out of the whole whole be near impossible without those tools In a stick car?
@@dontbreakit9021 I know they definitely use a clutch slipper and two step but line lock I’d have to ask… You’d be able to launch it with just a two step at minimum and use the handbrake to hold it (or e brake depending on where you’re from)..
legend thanks mate! There are a few more videos of the RX7 in the Day One and Two Super Street Championship Finals from a few weeks back - worth checking out, he nearly put it on the bumper in one of them haha 😉😁👌🏼
@@BecauseRacecarOfficial if 550 HP gets you on the bumper that's what I call balling on a budget haha cheap thrills thanks keep up the good work I will check it out.
@@dontbreakit9021 oh it goes hard haha.. The reason it got up is because he wasn’t engaging the clutch fully which meant it wasn’t engaging the clutch slipper so that was the result of dead hooking 550hp on slicks 😂👌🏼
Beautiful car and vd. No music, no dumb commentator, just pure rotary sound. Excellent job!
Never thought I'd see it punch in like that. Thank You!
I was rooting for you to get into 9 second territory. You're so close!
Australia and Puerto Rico, the masters of the rotary engines. 👏
new zealands by far the best for rotas mate...
@@Rotaholik we'll if we talk about record's, Puerto Rico is the top contender.
@@26zilence wasnt talking about records, look into nz's rota scene its crazy big over here not to mention we were the first to create the 6 rotor engine. i recommend looking up REunion to see what i mean about how big nz are on there rotas. PPRE are known all around the world for there rotary builds people like rob danm and mad mike can vouch for that...
@@26zilence also i am not dissing puerto rico in any way. they have some insane rotarys over there also
@@Rotaholik i got you my friend
Old mate loves the limiter in the burnout ! 🔥 🔥 🔥
That’s where Rotors are happiest aren’t they? 😉😂
I think people do not truly understand how fast a 10 second car is❤
The rear isnt squatting enough.. lossen those springs/shocks up a bit and watch that 60 foot get much better
Full body, y como camina esa bestia. Rotary power.
There is a guy in the States who runs a G- Force box in a FD that runs 7's! I love seeing cog swappers on the dragstrip! Cheers for sharing mate...
Have you seen Matty’s FD on our channel? Super super nice build that one
There are two actually ! Len Bacon and Mike Jtineant. Incredible cars. Both getting some much needed rear end strengthening work right now. Mikes car has been on the fueltech usa UA-cam channel before (red FD)
I haven't seen the car, as I'm new to your channel, but I'll check it out! Cheers mate...
Definitely check it out, I think you’ll be impressed 😉👌🏼
I've only seen Len Bacon's car so far, and it really made me appreciate it for what it is! Just seeing it get out of the hole on a standard diff (I think!) and skate it's way to a bloody good number, just makes me happy for the bloke!
man this is nice... i had the same car and made the same power but i regret i never took it down the track....i only street raced it!🤣😵💫
Ohhhh yeah!!!! Manual FTW keen to see how mine goes. How do you find the t56? Thinking of going cd009 if mine blows
T56 in this one is still going strong 💪🏼
@@BecauseRacecarOfficial how is it with the high rpm shifts?
13B rotary epitome.
brap brap 😁👌🏼😍
The car has to build boost again in every gear and still run good times
Impressive right 😁👌🏼
🔥🔥🔥🔥se mueve😍😍😍😍👍
What diff is that 💪💪
Running a 9” mate 👌🏼
@@BecauseRacecarOfficialline Lock and two step ?? I've just built a 500 HP manual car I haven't taken it to the strip yet because I haven't got a line Lock and two step set up I assume getting out of the whole whole be near impossible without those tools In a stick car?
@@dontbreakit9021 I know they definitely use a clutch slipper and two step but line lock I’d have to ask… You’d be able to launch it with just a two step at minimum and use the handbrake to hold it (or e brake depending on where you’re from)..
What was the 1/8th mile ET and MPH? Nice passes.
Not too sure mate will see if we can find out
Thing 60 fts pretty consistent two step and line Lock?
Two step and clutch slipper I’m pretty sure… don’t think it has a line lock but I’ll ask, more than likely on the handbrake to keep it on the spot
@@BecauseRacecarOfficial good driving knows his car that's for sure thanks for the upload was a good watch I subbed and hit the bell
legend thanks mate! There are a few more videos of the RX7 in the Day One and Two Super Street Championship Finals from a few weeks back - worth checking out, he nearly put it on the bumper in one of them haha 😉😁👌🏼
@@BecauseRacecarOfficial if 550 HP gets you on the bumper that's what I call balling on a budget haha cheap thrills thanks keep up the good work I will check it out.
@@dontbreakit9021 oh it goes hard haha.. The reason it got up is because he wasn’t engaging the clutch fully which meant it wasn’t engaging the clutch slipper so that was the result of dead hooking 550hp on slicks 😂👌🏼
What transmission ?
T56 mate 👌🏼
@@BecauseRacecarOfficialhope that project is still alive thats an easy 9sec without lifting the gas pedal 👌