Glad I seen this video before messaging you. I just noticed a couple days ago that the rear flashed at a different pace when pressing the brakes on my converted 5th gen tails with amber turn signals
If my truck is a tradesman and I want to install led (Laramie or limited) tail lights do I need the adapter? (21 Cummins tradesman) don’t want spot monitoring just the lights. TIA
I have a 21' 2500 with the halogen tail lights. I want to swap them out to these factory LEDs. I see the harness you showed for my year has NO resistors. Will the BCM need flashed or is it plug and play with just the harness adapters? Thanks
using our XP0087 (19-23) HD adapter - no resistors are needed or BCM updates. The 24+ version (not shown here, as it was just released) - will come with a resistor.
@RetroShopLights Do the red brake LEDs stay lit even when the turn signals are on sitting at a red light with your turn signal on? Just curious if somehow you figured out how to make the brake light drop out, without the BCM reprogrammed.
Hello, I would like to ask you if is any easy way to have my tail lamps turn signal lights orange for EU use. My truck is 2019 DT laramie with LED tail lamps. Thank you for answer and best Regards from Czechia
Wonder why you can just make them like the cheaper ones where I didn’t need anything just plugged the old harness to the lights and just used alpha obd and it took care of the light out issue and nothing is needed extra hmmmm
Simple - customers want plug n play. Not every customer wants to use AlfaOBD. Its a great program, but our focus with our adapters is a plug n play experience - without needing to reprogram the BCM.
Hi @retroshop, i have a 2018 dodge ram rebel and im not exactly sure if i have a incandescent or led equipped tail lights? Which harness should i get and which 5th gen tail light would fit my truck? Thank you!
Do you offer any type of core refund? I have a 2020 Limited and I want to switch to the night edition tails. Would there be a cost reduction if I sent the current ones back to you?
Unfortunately, no. Many many years ago we had a core program - and through the acts of a few lovely people.....we lost a lot of $$ in "cores". We had to close the program down.
We have the halogen (incadescent) 4G to 5G HD LED adapters on our website - www.retroshop.us, under the "Adapter Harness" section. If you are looking for an adapter to put the incandescent 5G HD tails on the truck, I am not aware of anyone that makes that adapter at this time.
@@rosales75904 our adapter does not have provisions for the blind spot - so getting the tails without blind spot is just fine. OEM is what they are made to work with as well.
Daytime running lights are typically lights on the front of a vehicle to allow other vehicles to see them. Tails do not have a DRL function, but they do have a "parking light" function - which is the larger "C" on each of these tails. They come on with the first click of the headlight switch dial (from off), or they come on with headlights. They are also on when in auto mode when the headlights are on.
@@RetroShopLights Nice I currently have recon taillights and morimotos in the front was looking for a spicier look in the rear and I think these are it.
@@MrMarcviesca yes, we do have them in stock and available to sell to you. retroshop.us/search?type=product&q=conversion See there for more info or to purchase.
Glad I seen this video before messaging you. I just noticed a couple days ago that the rear flashed at a different pace when pressing the brakes on my converted 5th gen tails with amber turn signals
OCD??? The RED I need the RED.😎⛔️🤣
I want those black ones big time though
bring it on! we always have those in stock here.
Will any of these work on a 2022 1500 classic? I’ve got a white tradesman that I think would look awesome with that painted one!
If my truck is a tradesman and I want to install led (Laramie or limited) tail lights do I need the adapter? (21 Cummins tradesman) don’t want spot monitoring just the lights. TIA
yes, you will need the adapters for your tradesman, if it came with incandescent tails.
I have a 21' 2500 with the halogen tail lights. I want to swap them out to these factory LEDs. I see the harness you showed for my year has NO resistors. Will the BCM need flashed or is it plug and play with just the harness adapters? Thanks
using our XP0087 (19-23) HD adapter - no resistors are needed or BCM updates. The 24+ version (not shown here, as it was just released) - will come with a resistor.
@RetroShopLights
Do the red brake LEDs stay lit even when the turn signals are on sitting at a red light with your turn signal on? Just curious if somehow you figured out how to make the brake light drop out, without the BCM reprogrammed.
@@jeremys3987 brake light does stay on, and no way around that without BCM programming.
I have 2015 Dodge Ram 1500 5.7 4x4 I want the full set up with harness on the first tail light ??
What is the OEM part number on the night edition headlights? Will those always include the spot for the BSM? Thanks!
Where can I get the white ones
Hello,
I would like to ask you if is any easy way to have my tail lamps turn signal lights orange for EU use. My truck is 2019 DT laramie with LED tail lamps.
Thank you for answer and best Regards from Czechia
It would be best to email or call me please on this one - thank you!
I want the 5th gen night edition for my 4th gen sport.
We've got 'em in stock! Snag 'em at www.retroshop.us
Wonder why you can just make them like the cheaper ones where I didn’t need anything just plugged the old harness to the lights and just used alpha obd and it took care of the light out issue and nothing is needed extra hmmmm
Simple - customers want plug n play. Not every customer wants to use AlfaOBD. Its a great program, but our focus with our adapters is a plug n play experience - without needing to reprogram the BCM.
@@RetroShopLights so would I have to convert my BSM back to the halogen lights since changing the lights over to the leds with the obd
Thanks
@@RetroShopLights also are the black lights on this video the night addition ones with the the blind spot.
Thanks
@@mikeyncali not sure I 100% follow you......might be best to email us
@@mikeyncali not sure on the ones in the video. We carry the non blind spot ones in stock, but we can get the blind spot ones as well.
🤩🤩😎😎
Hi @retroshop, i have a 2018 dodge ram rebel and im not exactly sure if i have a incandescent or led equipped tail lights? Which harness should i get and which 5th gen tail light would fit my truck? Thank you!
you can email me a picture of your tails, I can tell you which ones you have.
I just bought 5th gen 2500 non led tails and I have a 4th gen 2500 with non led do you have an adaptor for that ?
Sorry, we do not. We only have them available for OEM LED tails.
Do you offer any type of core refund? I have a 2020 Limited and I want to switch to the night edition tails. Would there be a cost reduction if I sent the current ones back to you?
Unfortunately, no.
Many many years ago we had a core program - and through the acts of a few lovely people.....we lost a lot of $$ in "cores". We had to close the program down.
@@RetroShopLights Understood. Thanks for the quick reply.
Hello. I have a 2019 ram 1500 lonestar I would like to know what is the part number for the led night edition to replace the factory one. Thank you
We have those here - retroshop.us/collections/5th-gen-ram/products/5g-led-tails-1500 TY!
I have a 4th Gen Ram with Morimoto taillights which harness will fix my flickering and light turning off
I'm sorry, we do not make a wiring harness for the Morimoto lights.
@@RetroShopLights would either of these work for LED down to halogen?
@@ARoss83 no, these will not work with 5G halogen tails. These are designed to go from any 4th Gen to LED 5th Gen tails.
@@RetroShopLights do you make a harness for 4th Gen led truck to go to 4th Gen halogen?
@@ARoss83 no, we do not. Alpharex does though.
I have a 2012 ram 3500 Laramie I want to do the tail light swap no amber donyiu have the harness in stock ?
Yes, red turn adapters are in stock as of this posting.
I bought some but people say you can only do the swap on 2013 and up that you can not put 5thgen tails on 2010-12
Not seeing your order from us here, I see a few emails on this from 2 years ago - but.....no order just yet.
Got it on eBay but can you Send me a link to the ones I’ll need the truck I have is a 2012 ram 3500 mega cab Laramie long horn thanks
Where can I get the halogen harness only to make these kind of tails work on 4th Gen?
We have the halogen (incadescent) 4G to 5G HD LED adapters on our website - www.retroshop.us, under the "Adapter Harness" section.
If you are looking for an adapter to put the incandescent 5G HD tails on the truck, I am not aware of anyone that makes that adapter at this time.
@@RetroShopLights do I need the blind spot module for them oem tails to work with your harness?
@@rosales75904 our adapter does not have provisions for the blind spot - so getting the tails without blind spot is just fine. OEM is what they are made to work with as well.
The harness fit with the Ram Classic Warlock 2020?? I have the led tail light from factory and I want to change it to 5th gen tail light. That works??
yes, sure will. The 2020 Classic is still considered a "4th Gen", and these will work great with that.
Hello I have a 2019 ram 1500 ( new bodystyle) with halogen tails, can I just buy led tails and plug them in or do they require an adapter harness?
19+ DT - the OEM LED tails just plug right in. No biggy from there!
@@RetroShopLights no harness or programming required, they just plug and work? Thank you in advance
@@johnnybravo2985 correct. I did it on my 19 Ram 1500 waaaaaay back in October 2018. EASY.
@@RetroShopLights you sir are the man! Thank you and I look forward to doing business with you in the future
Does it plug and play on 2010 ram 4 gen work truck . Incandescent taillights ??
Yes, sure will.
Do this come with day time running lights?
Daytime running lights are typically lights on the front of a vehicle to allow other vehicles to see them.
Tails do not have a DRL function, but they do have a "parking light" function - which is the larger "C" on each of these tails. They come on with the first click of the headlight switch dial (from off), or they come on with headlights. They are also on when in auto mode when the headlights are on.
@@RetroShopLights Nice I currently have recon taillights and morimotos in the front was looking for a spicier look in the rear and I think these are it.
Will the night edition fit my 4th gen 2017 sport?
Will 5th Gen Tails fit a 4th Gen truck? YES - with our adapter! We review the 4 adapters that will work for the 4th Gen trucks.
@@RetroShopLights do you have any for sale?
@@MrMarcviesca yes, we do have them in stock and available to sell to you.
retroshop.us/search?type=product&q=conversion
See there for more info or to purchase.
@@RetroShopLights and they will fit my 1500 ?
@@MrMarcviesca Yes...you have a 4th Gen Ram, these will fit.
If someone couple help me that would be great
$800 for the tail lights 🤣
They look awesome though
@@mikeyncali $800? I'll take a set