How To Make Your Own RAM LED Tail Light Adapter Harness
Вставка
- Опубліковано 16 бер 2022
- How To Make Your Own RAM LED Tail Light Adapter Harness - How Make Your Own LED Taillight Conversion Harness for RAM Trucks in this video we show how we made a adapter harness to convert your halogen incandescent taillight harness to the factory LED tail lights on ram1500 ram2500 ram3500 trucks
Click HERE for harness to plug into your reverse bulb harness
amzn.to/3weOo2O
Click HERE for the harness for the reverse bulb
amzn.to/3wd0AB9
Click HERE for the harness to plug into you tail and turn signal light bulb
amzn.to/367LJgS
Click HERE for a good connector kit and way better crimper
amzn.to/3N0bQa8
*Checkout other cool products Boosted Motorsports has tested and recommends HERE* 👇
www.amazon.com/shop/boostedmo...
Support BoostedMotorsports by JOINING Today! / @boostedmotorsports
Disclaimer:
Due to factors beyond the control of BoostedMotorsports, I cannot guarantee against improper use or unauthorized modifications of this information. BoostedMotorsports assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BoostedMotorsports recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BoostedMotorsports, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BoostedMotorsports.
As an Amazon Associate I earn from qualifying purchases. Products in the provided Amazon links are my recommendations based on honest use and experience with them.
#Ramtrucks #ram1500 #ram2500 #ram3500 #ram - Авто та транспорт
Click HERE for harness to plug into your reverse bulb harness
amzn.to/3weOo2O
Click HERE for the harness for the reverse bulb
amzn.to/3wd0AB9
Click HERE for the harness to plug into you tail and turn signal light bulb
amzn.to/367LJgS
Click HERE for a good connector kit and way better crimper
amzn.to/3N0bQa8
**Checkout other cool products Boosted Motorsports has tested and recommends HERE** 👇
www.amazon.com/shop/boostedmotorsports
Not too jazzed by the boarder on these tail lights but a cool mod! Should look much better smoked if you decide to do that.
I have a smoked pair I haven’t be able to install for the past 2 years I been looking for a affordable harness and no luck for you to just make a diy that simple keep ‘em videos coming
WoW That's very creative....Nice.
Thumbs UP
Thanks! Not the cleanest on the pin side but it gets the job done
worked. thx, bro👊🏾
Np 💪
Hello how would 1 go about if they wanted to add capacitors instead of the alpha obd programming
Just make sure they work good and fill the hole with hot glue. It should hold everything together and keep moisture out and the spades connected on the pins forever.
I know it’s a bit ghetto but I mean look at what we’re doing😂 great job though
I upgraded my 2010 headlights from dual halogen to dual projector with DRL running lights. Is there a way to use AlfaOBD to have them on every time I turn on the truck without using the running lights knob?
They sell female spade connectors for the small male spade terminals on speakers at local auto stores. Looks like they would work on those small male terminals.
I tried those they were too big
How would you run capacitors on the wiring harness?
Which programmer do you use,looks like it on your cellphone?
You should be able to find a 4 pin connector that will actually plug into and work with the housing
What about the can-bus problem? Retro
Just did this to my 16 Ram 2500 this weekend. I used oem led taillight and alpha obd. I still get an error message on my dash. Any ideas?
i would try and solder the wire to the contact and then shrink tube over that connection. THen maybe fill in with non-conductive epoxy/filler for a water tight seal
Yeah that could work too! Like I was mentioning I mainly just wanted to show what you could do but will try to recoup money and resell these tail lights so didn’t want to do a permanent connection there 😁
THANKS FOR YOUR CONTENT MAN YOU HELPED CLEAR UP SOME STUFF FOR ME LOL BUT IS THERE ANYWAY TO CONVERT “FACTORY LED” (TAIL LIGHTS) BACK TO A STANDARD PLUG AND PLAY SO I CAN GET SOME BETTER STYLE LED HEADLIGHTS?
AHHHHHHHHHH!!!!!
YAY, I am F I N A L L Y the 1st viewer!!!!!!
Heck yeah 🤘🤘🤘
I’ll just leave the led tail lamps present bc if u ever decide to get aftermarket tail lights the truck will have the code enabled for it I had to do that with my alpharex for my headlights until I said the truck never brought quad lamps the passenger head light will always go out so if I ever decide to get their tail lights I’ll just leave that on
Would this work the opposite way around? I have a factory led truck and I’m trying to get a specific set of tails but they are for a halogen truck
Yes im curious as well
Why do anything to the reverse light (other than switch bulbs)? Is the twist-lock different? Looks like both of them use a separate, modular bulb - not like the halogen vs LED where one is a modular bulb and the other is a built-in panel.
Their different sizes
The ram oem halogen tail lights are stupid expensive also. Recommend lots of dielectric grease on all connections
People sell them for like $50 a set here in Texas on facebook
What happened to getting some 5th gen tails?
Still in the plans just waiting for a set to come up for a good price 👍
@@BoostedMotorsports makes sense. Thought maybe you changed your mind
So You don't need a load resistor?
Yes
You do otherwise says bulb out unless you have the program
👍👍💯🙌🙌🇺🇸🇺🇸👌👌
no check engine?
If you use alpha obd you can select led. Or you can run capacitors
Just an fyi, the reverse lights are the same for both the led's and the halogen. you didn't need to make a new harness for the reverse lights.
They aren’t the same unfortunately. Just did mine.
Do you have to reprogram anything after doing this?
He did it near the end
@ghost thank you
😄👌🏽 the main thing it works great i would've did it No one gonna see it #BSTEDMTRSPRTS #100kyoutubeplaybutton soon