Hey bro thanks for the video, I’m a little confused though. What’s the point of making the fancy plug and play connector that goes in between? You said I can just take the red wire from the cdi and just splice it directly to the black white wire from the right hand control? Do I just take the red wire from the cdi and T into the black white wire on the oem harness and everything will again work like before the cdi? I’m assuming you just made your connector to not add any more splices onto the actual harnesss? Thanks again
Thanks bro I appreciate the help, very informative. Surprising none of the overall tutorials cover this, I don’t see hope anyone could be fine just losing their kill switch like that but that’s just me and my ocd lol
do you have a diagram for it I am new to the ruckus life and i got a used one but i think he already moded it and the kill switch does not work so I am thinking he did not do this. My ruckus I have where you connected that red wire in where it also had a green wire and a loose red wire connector not attached to anything already has one red wire going into some type of fuse, so my question is can't I just connect it to that loose red connector that's on the same wire since it's already making connection to that wire both are in?. Last question can you leave a link to the connector kit I see two similar ones but both have different size, one says 2.8mm the other says 6.3mm terminal with which one is it?
hi there, thx for the video. Would you know by chance which wire or fuse is used for the ignition on? i gotta plug my dual cam to it :) thx for your help
@@axlemuzkeys988 That’s great to hear! I think I’m going to give this a shot once my cdi arrives, I don’t like the idea of losing the use of my engine stop switch.
I know this was posted awhile ago man. Hoping you can help though. I tapped into the white black from the switch and tapped that into the red from my CDI but the kill switch still doesn’t work. What am I missing? It will allow it to not turn on when kill switch is off but if the bikes on, the kill switch can’t shut the bike off. I appreciate your time!
Just the standard kill switch on the right handle bar. I think after a lot of research I may have figure it out. I ran the red wire from the CDI to the wife plug of the computer of the ruckus. Should I have not done that and just ran the red to the control? Sorry if that’s confusing. I’ve had the CDI installed for months. Just trying to get my kill switch back
Hey what is that connector called? Also if I put a switch where the the red wire comes of that connector would it re enable the rev limiter? Asking because that would be nice to reenable sometimes when others are riding. Also what gauge wire is that?
If you put a switch on it it will shut off the power to the cdi and the ruck won’t run. Look up 4 pin automotive connectors. I don’t remember the gauge but it doesn’t have to be very big.
Thanks man!
Hey bro thanks for the video, I’m a little confused though. What’s the point of making the fancy plug and play connector that goes in between? You said I can just take the red wire from the cdi and just splice it directly to the black white wire from the right hand control? Do I just take the red wire from the cdi and T into the black white wire on the oem harness and everything will again work like before the cdi? I’m assuming you just made your connector to not add any more splices onto the actual harnesss? Thanks again
Correct, that plug is for people who don’t want to splice into the stock wires.
Thanks bro I appreciate the help, very informative. Surprising none of the overall tutorials cover this, I don’t see hope anyone could be fine just losing their kill switch like that but that’s just me and my ocd lol
do you have a diagram for it I am new to the ruckus life and i got a used one but i think he already moded it and the kill switch does not work so I am thinking he did not do this. My ruckus I have where you connected that red wire in where it also had a green wire and a loose red wire connector not attached to anything already has one red wire going into some type of fuse, so my question is can't I just connect it to that loose red connector that's on the same wire since it's already making connection to that wire both are in?. Last question can you leave a link to the connector kit I see two similar ones but both have different size, one says 2.8mm the other says 6.3mm terminal with which one is it?
What part do you need a diagram for
hi there, thx for the video. Would you know by chance which wire or fuse is used for the ignition on? i gotta plug my dual cam to it :) thx for your help
How many have you done this too? And have you ever had any issues because of it, burning up the right controls, cdi, burning wires, etc.?
Done it to all four of mine at one point. I’ve never had any issues
@@axlemuzkeys988 That’s great to hear! I think I’m going to give this a shot once my cdi arrives, I don’t like the idea of losing the use of my engine stop switch.
I know this was posted awhile ago man. Hoping you can help though. I tapped into the white black from the switch and tapped that into the red from my CDI but the kill switch still doesn’t work. What am I missing? It will allow it to not turn on when kill switch is off but if the bikes on, the kill switch can’t shut the bike off. I appreciate your time!
@@diegobarajas7952 what controls are you using
@@axlemuzkeys988 sorry, what do you mean controls? Im using an NCY CDI if that’s what you mean. Sorry brother. This is all new to me
@@diegobarajas7952 what kill switch are you using
Just the standard kill switch on the right handle bar. I think after a lot of research I may have figure it out. I ran the red wire from the CDI to the wife plug of the computer of the ruckus. Should I have not done that and just ran the red to the control? Sorry if that’s confusing. I’ve had the CDI installed for months. Just trying to get my kill switch back
@@diegobarajas7952 yes red wire should just go to the white black wire on the controls
Hey what is that connector called? Also if I put a switch where the the red wire comes of that connector would it re enable the rev limiter? Asking because that would be nice to reenable sometimes when others are riding. Also what gauge wire is that?
If you put a switch on it it will shut off the power to the cdi and the ruck won’t run. Look up 4 pin automotive connectors. I don’t remember the gauge but it doesn’t have to be very big.
Nice. Wanna make me one? Lol