CYC X1 STEALTH 1500Watt Rated Mid Drive Kit Installation (PART 2/2)
Вставка
- Опубліковано 27 сер 2022
- 3D Printer - Creality CR10 Max Link - www.shareasale.com/m-pr.cfm?m...
Patreon - / evcustoms
Channel Support - www.paypal.com/paypalme/evcus...
EV-Customs Website - ev-customs.com
Instagram - / ev_customs
Facebook - goo.gl/tu3Qdk
Music - Artlist - Наука та технологія
Dump the music, do voice over instead, you will 4x your views.
Battery placement always the hardest part to me. Good job, amazing work
This is my bicycle, it is just AMAZING and also really appreciate the ongoing support by the guys. 5 stars!
Thank you Konstantinos.. kalotaksido! 😀
They made a mistake you need to correct, the rubber padding that is between the motor holder and frame is double. You need to remove one and place between the motor and frame as well.
The lights are also upside down, making the low and high beams reversed.
What size chainring did you go with? What's the top speed you experienced? What is the maximum wattage you witnessed being used?
I've been wanting to convert my bike for awhile now but every video I've seen has been on bikes with 1by drivetrains so I was pleasantly surprised to see your video featuring the Sport version of my bike, I have the Expert trim.
Nice work. I appreciate your efforts. Looking forward to the next video... Cheers... 🥂
Very clean build. 😊
Thank you mate! 👍😁
This is very helpful thank you so much
Thank you mate...!
kalimera, very nice work 😉
So glad the gen 3's finally did away with square taper cranks.
quieter than I thought
the wiring is not covered by anything and are pointed at the area where most splashes are coming from the rear wheel. what's the IPX rating for the motor?
I know that connectors are waterproof but reality is, that those really are not waterproof.
Great video, well edited. What battery did you use? I enjoy your videos keep them coming
Thank you a lot my friend..!!
hi. My bike is equipped with a 500w motor and a 13a controller. I am going to change to a 20a controller. I know that bldc motors can withstand 2-3 times the power, but I wonder if this is true.
Hello friend it's going faster then the athletic them bro 😅😊
How much would cost this ? Professionally installed ? And price of equipment?
Very tidy installation.
אם המורה שלי היה טוב כמוך הייתי מהנדס ,🙏🙏🙏😃❤️👍
I would think the chain and that slotted box would be susceptible to mud.
Does anyone know how many miles these batteries or these converters give?
Need some EUC content my dude.
Great video,How many miles do you get on this bike, while averaging 30 miles (48Km), does this motor overheat if you using throttle while you doing 30 miles (48Km), no one mansion estimated mileage range, can you also mention top speed and what size chainring you use 32,38,or 42, reply is well preciate it, you also get new subscriber to channel.
About range i will ask the client for feedback my friend.. 42 size
Hi I'm from Melbourne Australia could you tell me the tool I need to take out the bottom bracket the socket and can you use the same socket when installing the cyc kit I have a crank removal tool I have a Norco storm 3 I no you have links but they aren't for Australia if you tell me the tools I need for this kit I will buy them at 99 bikes I love watching you fit kits I have fit a hub motor kit on my gt now I want to get a cyc I think they are amazing and they have torque sensor which I don't have on .y other bike it's pas ans I don't like it.
Hello man, how are you? i am trying to understand which tool you mean.. the black one at the end where i'm tightening the bracket of CYC kit?
Seems like a really expensive motor on a really cheap new bike frame with really low end components. Odd value proposition. I would think that most of us are looking to add a motor to a “old” but high spec MTB in the basement.
Hi..
I understand you.. but this conversion is for client.. ;), now i have on stand 3700 euros MTB bike with a X1 Pro gen3 kit for installation
Cuál batería usaste?
Brilliant like the 3d printed mount, where can I fing one of those
Have you 3D printer.. i will send you stl files
@@EVCustoms didn't look like it fit very well...
That chain solution seems so overkill compared to Bafang.
I'm confused. Why the extra chain? Why not drive the chain ring directly like the Bafang BBS mid drives do?
I built a similar setup a few years ago using a car alternator as a motor but it was terrible. Maybe partly my fault for poor build quality and maybe the alty motor was not up to the job but the design was poor from the start.
Well made video though. 🙂
The Bafang motor uses an internal gear instead of the external chain.
@@chucknoob7041 And is so much better because of it.
@@alibro7512
Well there are pros and cons. The Bafang is quiet whereas the CYC has a whine due to the gearbox reduction. But because of the external chain drive the CYC can be mounted much closer to the frame or even (like I did) moved into the frame triangle. The Bafang would hang way too low for my needs.
@@chucknoob7041 horses for courses, if this is better for you then that is what matters.
I have a Bafang BBS02 which has been great for me. 🙂
@@chucknoob7041 There comes a point were you realize you should have just gone with a DENGFU ebike
which gen? 2?
I would like a primary belt drive to make it quieter
Thats great except you would loose all the mechanical advantage the derailer offers. Of course you could add an internally geared rear hub but that would really increase the cost of the conversion.
Also I'm not sure there is a way to use belt drive with this motor system in the first place.
@@ActivityPhoto primary drive belt would replace the chain from motor to crank gear ⚙️
that motor is powerful I broke my Chain and my derailer I dunno how to setup the power in computer stuff
😮why not ride it with protection
Where did you get that battery mount at
3D printed design..
Relying on solder connections alone without physical connection between wire and terminal is a bad idea.
Can this work on single gear bikes?
Of course....
Stealth ??
Bafang BBSHD (LUNA Cycle) is less expensive, easier to install, and more powerful. I've installed dozens of them.
I didn’t use Bafang because they hang down too low. I mounted my motor inside the frame triangle which you can’t do with the Bafang.
Imagine trying without the tool. Never get there.
Upside down is just wrong !!
Horrible
Compared to what?
@@chucknoob7041 riding his mom
@@chucknoob7041 using self tapping screws into the aluminium bike frame to attach a heavy battery is Horrible
With magnets is better? this kit have battery which mounted on frame via magnets, here you can see why i made the 3D printed bracket to make better surface connection with the frame..
@@EVCustoms Yes very good Idea the 3d printed mounting bracket but not using self tapping screws into frame
¡Que horrible!. Cadenas y bandas en vehículos eléctricos🤮.