I'm really liking your videos. You're putting out a lot of good and useful information. Merry Christmas to you and your family and I hope Santa is good to you!
@@goodmanfishing I can't get a tape to the other side of the boat underneath the deck. I've opened up at the console dash and put a transom transducer in but not much luck from the tray.
I have a slot in the top inboard corner of my starboard rod box that a lot of my stuff runs through. My livescope, router, and all transducer cables run through the right rod box. It's pretty reasonable to get to the trolling motor pedal tray from there. Hope that helps.
I have a LiTime 100ah Mini that I use with two 10 inch Helix, one 12 inch Helix, Mega 360, Humminbird network hub, Garmin 126 graph and live scope box, plus two 12 foot Talons. I have fished 8 hour tournaments no problem with that 100ah Mini. I just bought 3 of the LiTime 50ah batteries for my Ghost TM and am confident they will be a great addition and weight reduction.
Can I use my on board three back charger on either lithium or lead acid I have a pro sport HD or do I have to change out all three batteries at the same time to lithium thanks great videos
Hi Mike - I took a look at the ProSport website and could not find an HD model that supported a Lithium charge profile. Most multi-bank chargers I have seen offer individual battery chemistry settings for each bank. That allows you to mix chemistries. If you have a single "lithium" or "lead-acid/agm" setting for all three banks, then I have to assume all batteries hooked up to that charger must be that chemsitry.
What do you think about this battery?? 👀
Thanks that’s exactly what I have with sea clear harness no go pro
I'm really liking your videos. You're putting out a lot of good and useful information. Merry Christmas to you and your family and I hope Santa is good to you!
Thank you! Merry Christmas to you as well 👍🎅
Great video. I'm hoping you share how you fished that electronics circuit over to the units. I ain't having much luck with the same hull. Thanks
What challenges are you having with running the wiring? I don't particularly have a video on that ready.
@@goodmanfishing I can't get a tape to the other side of the boat underneath the deck. I've opened up at the console dash and put a transom transducer in but not much luck from the tray.
I have a slot in the top inboard corner of my starboard rod box that a lot of my stuff runs through. My livescope, router, and all transducer cables run through the right rod box. It's pretty reasonable to get to the trolling motor pedal tray from there. Hope that helps.
Would you also post the stl file for your 3d printed holder?
how much use do you think you would get with 4 12 inch graphs and a live scope box
Less than four hours. I have another video that has a battery sizing calculator with it 👍
I have a LiTime 100ah Mini that I use with two 10 inch Helix, one 12 inch Helix, Mega 360, Humminbird network hub, Garmin 126 graph and live scope box, plus two 12 foot Talons. I have fished 8 hour tournaments no problem with that 100ah Mini. I just bought 3 of the LiTime 50ah batteries for my Ghost TM and am confident they will be a great addition and weight reduction.
Can I use my on board three back charger on either lithium or lead acid I have a pro sport HD or do I have to change out all three batteries at the same time to lithium thanks great videos
Hi Mike - I took a look at the ProSport website and could not find an HD model that supported a Lithium charge profile.
Most multi-bank chargers I have seen offer individual battery chemistry settings for each bank. That allows you to mix chemistries.
If you have a single "lithium" or "lead-acid/agm" setting for all three banks, then I have to assume all batteries hooked up to that charger must be that chemsitry.
What all electronics are you running ? Three garmin 9 and livescope ?
On that battery I run three 93sv Garmins, livescope and a GoPro. I usually sleep one of the console units when I fish up front.
What batteries are you using in the boat your sitting in
I have this LiTime currently running my electronics
@@goodmanfishing how about trolling motor
How did u mount your graph on the console
Some 3D printed mounts for the console. And a ram mount for the one on the side.
@@goodmanfishing have any interest selling the mounts
@@davidroyds91 maybe after I run it for a while and see how it holds up. It's a fresh install.
Would hate to sell something that isn't robust. 👍
I here yah