Turn on and use pwm solar charge controller without battery || Use Charge controller without battery
Вставка
- Опубліковано 17 сер 2021
- Turn on and use pwm solar charge controller without battery || Use Charge controller without battery
Turn on and use solar charge controller without battery || Use Charge controller without battery - Наука та технологія
First Video about this procedure on UA-cam
Not a bad idea. I have been wanting to dump the heavy battery because my panels "over kill" what I am using them for and I'm only in good sunlight doing my project anyway. I don't know why it never crossed my mind to use a capacitor. Nice little hack for the panels! I will order one and give it a try.
Thanks for this. I will try this one as batteries are very expensive
You are magician dude 😎😂it's great idea for those people who can't afford battery but have solar panel for dc fan , my question is, which capecitor would be best for 10amps like this
Hi thanks bro.. All the way from south africa. Please me what to buy to power a laptop and 24" monitor and a router.
Thanks in advance
Kindly recommend the capacitor for 12v panel, 180watts..
48 v pannel k liye knsa capacitor lgay supply 12 volt de agy
Konsa capistor lagana ha 450 w solar panel ky sath
Big thanks from Quebec! I was afraid this was another fake trick, but all is working!😊
So far it only goes up to 14.4V, and not really stable, but it's quite cloudy outside. Will keep on tryin'
mn 180 watt solar plate par 2 ac dc fan without battery chalana chahta hun solar controler mn kon sa capasitor laga ga.plz tell me
Capacitor is 220v.. if we put 440v something bad happened or it will be ok
Does this setup enable using the controller's usb ports as a power source, e.g. for charging a smartphone?
yes
Ghr ka load chalega?
Ye to thk ha. Ab agay inverter ko supply kaisay dain gay jnb. Charge controller k out put ma itni power to ni hoti k wo inverter ma connect kr k load utha sakay
Which capacitor bro ... I can see 2200uf50v ... And it would be great if you add subtitle or audio description ... Viewers will understand what's happening and like your video more ... Also you can add links to the charge controller and battery if they exists where viewers could visit and buy it ... Just a couple of suggestions 😬
Thanks for suggestions. It is a dc capacitor not battery. its value 2200uf and 50v
I have just tried to a pwm solar charge controller (pwm is a type of charge controller not a company). This could not be on without battery. I have just experiment to turn it on without a battery using a capacitor that is quit cheaper than a battery
How's you experience ?
Min try kia ni hota on
me ny 4700uf 50v capacitor lagya kuch b ni hua. Controller on ni hua.
Is it possible to, lets say, charge a mobile phone using the output USB on the front using your method?
yes brother of course
What type of capacitor is compatible to 12v 35 watts panel and 10A SCC?
any 20 volt of above capacitor and about 1000 or above capacity
Is it capacitor good for use 100watt solar panel
yes. you can use this capacitor
O g sr g
Ktty uf ka h ktty volts ka h g
Ye to samasea c h g
I want the 2 front USB ports work without using any battery, as you show on the video, but I'm completely noob as far as what type of capacitor should I ask for at the electrical store.. Could you provide me the type of capacitor should I ask for ?
For instance, how do I know what type of capacitor I need to buy based on panel Volts and Watts ? Is there any mathematical formula to do the calculation ?
Thanks in advance
yes capacitor must be above 100 uf and its voltage must be more than solar panel open circuit voltage. the more capacity of capacitor is good
@@solarenergytechnical4175 So, for a solar panel of 12 Volt / 10 W, a capacitor of 220μF , 35 V will do, is this correct ?
Is there any chance that solar charger will be damaged by this kind of wiring?
@@windkl no chance to damage. it will work
@@solarenergytechnical4175 thank you very much for your help!
Salam bahi jan kengwe 20 amfer wala seteng batay j
ok we will make video for kinkway 20A settings
Fireworks
Will USB ports charge without battery or capacitor, only panel connected to pwm
it can not be turned on without capacitor or battery. so the ports will not work
@@solarenergytechnical4175 brother capacitor konsa use kren gy
When we put load on output it gone off.. what is the reason
load is more than solar panel current (input). solar panel is not giving enough current to drive load
I bought a solar panel 10W (18V), capacitor 2200μF / 50V, I did what the video denoted but *it didn't work* .. to be more specific, it didn't even power on my 30 A solar controler ...unfortunate !
try using same model pwm controller showed in video
I have the blue "Solar Charger Controller". Unfortunatly it wont work.
Totally fake video coz 1st pv voltage is 12.2 not possible pv is 18/19
Also I tried with capacitor resaut is zeero
Jhoot mein ny try ki hai ni hota
Totally useless it can't bear any load
Fack vedio