MPPT or PWM? Perfect Suitor Solar Charge Controller
Вставка
- Опубліковано 2 сер 2024
- How can you check if the charge controller you've got your eye on is really MPPT? I look at an auction, the packaging, the hardware and eventually I plug it in.
Items used in this video:
❗️These links are affiliated and I may earn a small commission if you purchase❗️
Perfect Suitor Solar Charge Controller: ebay.us/sChLv1
PortaPow Premium USB Power Monitor: amzn.to/2z85vVG
Thanks. You saved me quite a bit. I was thinking about buying this from ebay.
Thank you for checking this out. I just recently got one for my camper, and wondered about the inductor as well. this gadget really is a small, light package. I tested another one which came with a panel I bought, and got results similar to yours. The display on the other one was very hard to read as well, at least this one looks good and is easy to read. One of the parts on the board where the USB plugs are does look like a small inductor, but it would not be enough to do the power conversion job for battery charging, although it probably is enough for the 12 to 5 volt USB conversion. My guess on that huge drop is that it's a waste of money to put panels in series unless you are setting up a 24 volt system. I confess that I did buy it because of the MPPT claim, and did not think I would lose too much if it isn't because of the low price. It works, and looks nice, but they probably should not be calling it MPPT. I installed a different type which actually can boost current, because of the limited space on the roof of my pickup camper. I can't just add another panel to make up for the lack of boost. I am keeping my "perfect suitor" as a spare in case the one I am using now quits. Thumbs up for your time, thanks.
Nice Review Adam! Thanks
It is always a pleasure to watch your videos. Very professionally created and so very informative. Thanks!
thanks mate, glad i checked out ur video. running a pwm at the mo but wanted to buy and mppt. thanks for the info as i nearl bought one of these by mistake
I don't know if MPPT or Pwm , but its works very good for small system. I brought one. Nice Review.
I was about to buy a "mppt" but this video pulled me out of that trouble.Thank you sir.
Thanks for making these videos. I enjoy them very much. ❤☺️
Adam i've got the 70A version and is a simple pwm charge controler.
I've made some test with 750w solar array and it works pretty good for a 50$ pwm charge controler
Great video! I just love the clarity of your explanations. Thanks for the review!
Watched this too late, but good for a small set up. Worth the $20 i paid. Great video and very informative.
You saved me 70$ that definitely deserves a sub! Thanks!
Another great video Adam..thank you and keep on going with the good stuff! Even our chinese friends managed to overdraw the written PWM on the box they clearly forgot the PWM-Symbol on top of the box (see the video at 3:05) :D greets from germany
Yes there is a wave form on there isn’t there - noticed in the edit. Cheers
Thanks for the review. Was going to buy one.
i was just about to purchase this unit thanks for the heads up. i bought another one from wish and it had no inductions coils and i got my $48.00 back. thank again
Excellent exposition. Thanks a lot.
Good info, thanks!
Good tutorial & review. I know next to nothing about solar controllers, but boning-up as I intend to setup a kit on a new shed build. I've heard MPPT works better in cloudy conditions, but trying to weigh-up costs v benefits before buying. This really helped me. Cheers!
In all honesty I’d suggest putting more money into panels rather than controllers - unless you’re very short on roof space. MPPT is great at maximising what you have in good conditions. But if you’re not using it when it’s being generated I think the better investment is in panels.
@@AdamWelchUK Thanks. Good advice. I think a couple of 50W panels should suffice for my needs.
Not planning on using an inverter, as I can use an extension cable from the house for large power draw needs. Just looking to hook up a security camera, some LEDs and a radio for occasional use, and power everything from an old 70Ah SLA car battery that's still in good condition. Might invest in a decent leisure battery down the line.
Plenty of shed roof space for panels (approx 10ft x 4ft, south facing). The shed is around 35m from the mains board under the house, a patio, and garden, so digging and installing SWA cable was going to be too time consuming and uneconomical for my needs.
It is sold as a Pwm in Australia . Good unit for the price though ! By the way very good review . Many thanks.
Thank you for this! You definitely saved me some time and headaches. 😂😂 I was about to try one of these out, but right before confirming my payment, I noticed the heat sync looked like a decoy. I realized I should see if anyone did a teardown! What’s also funny is some of the genuine MPPT controller manufacturers show pictures of this inductor inside (and the PVMs I’ve looked at never bother showing the inside). This product’s video has a thumbnail of the back panel opened, yet all you see are those little pieces of conductive tape and not the inductor! Then you play the video, they don’t even show the inside (including the heat sync taped portion from the thumbnail ). They really went the extra mile to try to deceive. 😂
Have you found a good, genuine MPPT controller that’s cheap yet?
Glad to find your great video, sad that this unit came with my latest camper. I have much to learn. 😊
Thank for the information it was very helpful.
Great vid mate I just received mine today lol
I knew it wouldn’t be MPPT when ordered $33Australian but I’ll claim through eBay
I liked the dc output and USB ports. I think it would be ok for a small setup for lighting charge phone
Love your vids mate I’d like to compare our solar controller collection
No you knwe IT was not a MPPT
Becaus any MPPT would hawe max PV watt stampt on IT
Informative. Thank you.
Hi every one,
I have two and they are pwm!
But for the price and my setup i have the are working nice.
I have even exceeded the rated amp and it still works ok.
hey Adam I have a five-star solar charge controller it shows an exclamation mar on the left hand side... how can I remove it? it only have two buttons
I purchased a 70 amp version of this then found discrepancies online so I contacted the seller and then refused delivery so it went back to the supplier for a refund. I then purchased a EPEVER Tracer BN 40 amp SCC. Yes it was 5 times the price but it works better than any previously owned SCC which were all PWM advertised as MPPT.
You get what you pay for.
Thanks for this informative video.
"Full protect" it says, but I saw no fuse of any kind inside the controller. The Wincong SL-03 30A that I have at least sports an actual blade-style 30A fuse inside, easily replaceable should it blow.
Best Robin Leech impression on youtube, Perfect Suitor is the worst impression of an MPPT on youtube :) Cheers
Hi.
I don't find informations about the power capabilities of the Load out of m'y 'perfect suitor' ( ......) .
Can you hello me?
Thanks
Thank you for the review and the ''unboxing'' of the fake MPPT inside circuit.
Very informative video. Thank you. Also, what is the output wave form of MPPT charger?
Great Review ! I was just about to order one of these because theyre cheap . And now i wont ! Thank you for this it Really Helped . Regards Paul Roger
Hi i bought 1 same like this but i dont know if it is automatic switch on/off when its day and night and dont know to put timer either.
Thanks
Adam, I have a 12v Application, to run some FANS in my Greenhouse. The 240W Solar Panels I have, are OCV 37.48V and MPV of 29.48. mMy questions is can I use a 48/36volt Step Down Module, which is rated at 12V 20A @ 240 an produce Direct Power to the FANS, or should ......tie in a 20 PWM off of the 12volt side of the Step Down Module? What would be your recommendation?
What is the Cheapest 20A MPPT that could work in this application. As ALWAYS your videos are AWESOME ! Any Advise will be appreciated. THANKS
Thanks for a clear explanation, once again our little eastern friend's are attempting to pull the wool over our eyes. Buyer beware would be a good name for this auction site.
Yup. But when I upgraded to I could have saved $150 if I’d had one of them there mppt stickers.
Thaks for the video.
Do you think this controller is able to charge and manage a small system with a lithium 3S battery?
Regards.
hi what diameter should the cables from the battery to the regulator have?
I have mppt 40A charge controller, in very good day 600w panels in series 24v system it gives 35v just 20 to 35w and 1amp to maximum 2 amp.
What could be the reason
Hi, there is reset botton on this Solar Charge Controller?
Thanks I am looking for an mppt this one keeps popping up but as you say to good to be true. Also all the sites have only been on ebay for one to two years.
Would you recommend it for off grid hydroponics?
Glad I watched your video I just about bought one on Amazon.
Hi, regarding your video, I ask what append if I install it on RV with following config.
AC/DC converter on load connector and battery deep cycle on battery connector. When RV is connected to AC, will current pass from load to battery to charge it?
very good explanation.
Would it be difficult to add inductors and diodes?
GREAT VIDEO, there is a lot of deception out there when it comes to cheap charge controllers that say Mppt. Thanks William Orange county, ca.
Good video 📹, I might get one of those as a PWM
Does it work that the USB port of solar controller with out the battery
For stationary gel battery is 0.1.2? configuration
Hi, may i know what is the specs of the blue ceramic capacitor?
how is ut0,ut1 and ut2 in menu ?
Thanks for sharing .
With all those parts inside there I'm wondering if you couldn't add a diode and the coil on the panel side and it would work like a buck converter. Somebody took what could have been done with a few transistor and a zener diode used a microprocessor to do the job.
Can this be used to charged LiFePo4 batteries? I've got 4x 100Ah LiFePo4 batteries in series to form 12.8V (3.2V each) and I was wondering if this controller would be good.
LM2596 is a PWM voltage regulator IC
thank you for the information I got one of them and it's not doing what it's supposed to do so now I know why
Thank you sir
I just bought the 30a version and despite what the manual states, the 30a version is a cut down version with no current display or anything relating to power as it needs amps. I have just posted a quick and very basic review of it on my chanel. Go for higher rating unit.
Thank you.
can i use 2 adventurer controllers on 2 sets of panels to charge a single bank of batteries
I have this perfectsuiter charge controller . But facing a problem. I has 4s battery bank and can be charged to 16.8. But this charge controller can be set to a maximum of 15v only. So I am loosing 1.8v charge from my battery bank. Any idea to improve? Thanks Adam!
What does the initials stand for,for both types?
Thanks you saved my money.. I was to order one from ebay.
Anything new on the bms front, that I want to emulate
which mppt solar charge controller do you suggest?
Good info Excellent
Thanks you for review.
Masalahnya adalah kami tidak tahu bagaimana membedakan scc mppt yang original atau yang imitation.
I bought 1 this before I saw this video..Damn!
However, the timers might make it worth it. See if you can hook it up to the shed and use it to turn xmas lights on at night and off. No need to even put a solar panel. However if you had a 60 cell panel, it would be operating near mppt voltage anyways. I wish they would not put pulses on an off, just hit the voltage and off. But I guess that is for lead-acid. Even if each panel had their own controller you might get more power if a bird poos on your array and breaks the circuit.
Great review
Of pwm
thank god i just got my hands on a used MPP Solar Pip 2424MS, big chunky MPPT controler w/ built in inverter (2400w) and AC passtrough from the grid (can also charge the batteries from the grid if needed)
that's the model with auto self distruct. Nice one.
I have this perfectsuiter charge controller . But facing a problem. I has 4s battery bank and can be charged to 16.8. But this charge controller can be set to a maximum of 15v only. So I am loosing 1.8v charge from my battery bank. Any idea to improve? Thanks Adam
Thanks Sir.
If the sun was max, and the charge controller was truly mppt, would the output current be more than the PortaPOW’s limit? Did you know from general experience or previous measurement that the current would be much lower than the PortaPOW’s limit?
Just got mine in today. I decided to watch a review after I purchased it, but before I swapped it out with my old controller. I am so mad it’s not a mppt. The whole reason I bought it. I guess I need to do research BEFORE making a purchase.
Hi Adam, thanks for another informative video.
I have found that there are many charge controllers which are essentially a buck converter which (maybe that why they are called "PWM"?). Since buck converters should have an energy storage device there should be PWM controllers with an inductor. Hence, the presence on an induction should not be a factor for categorization in my opinion.
weird
You're mistaken. PWM chargers don't need power conversion to work. These type of chargers basically connect the solar panel directly to the battery at a certain interval and varying duty cycle. That's about it. If a charger doesn't have a reasonable inductor it can't be a mppt charger as this type of chargers definitely need power conversion.
@@egbertegberts5384 I had asked the question a long time back when I knew little about these things wanted to clarify. I know better now. Incase you still want to answer the question (for someone else who might be reading it), the question was: If there was a charge controlled with a buck converter without MPPT ability would you be able to tell them apart just by looking for the inductor.
2020.BIG Thank.
Thanks Adam, sadly I did buy one and thinking it was an MPPT, great review at least now I know not to so impulsive and buy on raw sellers description,
could you recommend an affordable 30A/40A MPPT charge controller,
Thanks again Adam, I am now subscribed,
Cheers buddy
Thanks David. I’m a fan of the EPEver range of mppt charge controllers, but also the renogy rover I tested last year was pretty good too. Thanks again
When the voltage is pulled down to the lower battery voltage, does the current change and move along the panel’s power curve?
You dont know ohm's law .. do you
hi, the LEDs don't light or the usb won't turn on, where is the problem?
Dobra robota. Dziękuję. Pozdrawiam z Polski.
Czyli to jest PWM ? Znalazłem na alledrogo taki sam i nie wiem czy odsyłać czy zostać przy Chińczyku z pwm.
my 20/20 dingo 12 24 48 volt charge controller it won't work with my single house solar panel 180 watts why???
helpful thanks
It looks similar to the tracer A & AN controllers. Have you checked the tracer 60, 80, & 100amp AN controllers?? Only thing is if I'm spending over $400 for a controller I'd probably spend a bit more and get the midnite classic150! For about $575, I try staying about 10amps under the rating on the tracers. I could use a single high current controller. Great video.
It has a similar lcd and button arrangement doesn’t it? Although I’ve only put my hands on the 20amp tracer models I’ve seen plenty of other videos and images to be confident that EPEver MPPT products do all have decent inductors in them for buck converting.
Looks a little like the Harber Freight charger you get with their DIY solar panel kit.
Hello Sir, have you ever check out the, Make sky-blue charge controller, if so can you say what do you think of them
IT is a fair Produckt
All in metal casting .. not ip water rated like EPever MPPT
IT keep What IT promis .. you can't get a farrai for a lada's prize unless IT is stolen .. and you liv in Romania or Poland
If you connected them in parallel, would the MPPT point of 17V be closer to 12V and you would get higher current ?
Good video. Thanks. I use this perfect suitor for my two 12v (18v) solar panels in parallel supplying to 12v battery. Is it better if I use those two solar panels in serial to make 24v (38v) to my same 12v battery? Will it charge more current? Thanks for your quick reply.
No. Keep them in parallel, this unit cant DC to DC current pump so will waste the extra voltage.
Rob Mc Thanks for your advise. I have connected my 3S battery pack to this controller. But facing a problem. 3X4.2V =12.6V. But this controller has a minimum overcharge setting is 12.9V. Will this 0.3v over setting create a problem?
some says... 50amps or higher perfect suitor are MPPT.. pls confirm this..thank u sir
Did you just connect 2 12v panels in series to the controller to charge a 12v batterie?
Yup. Solar panels will pull down quite happily to a lower voltage - the biggest trouble is your significantly reduce their power output as we saw. It could over charge the battery if it was left connected for a while but only if you’ve not got a charge controller connected.
Colega ele regular a voltagem da bateria bom dia.
So, have you contacted the seller to clarify this?
What’s their comment?
This may be a Random comment. I need help. I have a hoselect mppt charge controller. The input voltage of the battery and pv is inaccurate causing the mppt to sense that my battery is full. Is there any way to calibrate the voltage?
Is there one of these units than can take the 40volts from the panels and charge a 24volt battery bank? Thanks.
This will, but it’s not doing mppt. You’ve commented on a few of my videos, I’d recommend the EPEver mppt solar charge controllers over this one.
Where does the dc inputs pull there power from the panel or the battery?
The charge controller is powered from the battery.
Overall, thanks for covering this.
What's a book converter though?
Maynard Johnson its buck converter. It is variable voltage rectifying module for to turn higher or lower the voltage you want to match your battery charge requirements
I ordered two of the 200W solar panel kits that came with the blue controller, and both of the blue controllers were defective!
I have a brand new 50 amo version of this and when I switch on a 12volt kettle, the charger switches off. Does anyone know why this happens
Battery no good?