Edd Starts Work On The Engine Of A 1963 Volvo PV544 | Wheeler Dealers
Вставка
- Опубліковано 4 вер 2024
- Edd gets to work on tuning the engine of this 1963 Volvo PV544, starting with the carburettors.
For more car clips from Wheeler Dealers just head to: / wheelerdealerstv
Subscribe to Wheeler Dealers TV: www.youtube.com...
My parents had a 68 122s wagon. Same engine. They bought it new in Sweden and had it over 40 years.
I love three things about this guy. 1) his apparent automotive knowledge; 2) his on-air personality; and 3) his hair.
It was my first car in 73 High School... it was my parent's car and was given to me when I got my license... it was the family car ... and I beat the hell out of that motor and it never quit .. it had dual factory carbs... I also installed an 8track player in the glove compartment and 2 round 2way speakers on the back deck under the window with was perfectly angled for speakers
Edd is surely missed. Seems wrong to post videos of him when he was dumped by the show's producers.
im pretty sure he willingly left but youre still right
@@michaelderkacz5526 Edd left the show due to the direction it was starting to go to.
instablaster
@@michaelderkacz5526 ら、
@@quinnman1973he’s got his own show and it’s a bit too technical. Only slightly
Had a 1972 240Z with SUs... brings back memories. The manual called for W20 but it caused them to use oil. Datsun Dealer used ATF it it worked very well. Cheers 🥂
My first car. 66 vintage, drivers door bondo sealed....sweet driver!
I can watch Edd all day! My chef wife mentioned, that he is working like a chef. Which is a praise for a mechanic :)
Edd china was great... would like to see this whole episode as am falling for this volvo😉
Wow!
Using Edd's name to try and get views smacks of desperate time's for that swindler Mike.
A down vote to you sir.
Grymus yes agreed I find this post very odd and in bad taste. They should be trying to promote their current albeit sub par mechanic choice.
Great! Without Edd: No Wheeler Dealers!!!
Get rid of Mike and bring back Ed!!! In fact show with Ed and Ant would be great!
Korican1133 so who buy the cars and parts?
some people need that info too....
Haha, and who will barely assist in “making” stuff with barely doing any work when actually just getting in the way... Like Mike does haha.
Seriously though I’m sure it would be more entertaining watching Ed and Ant go get their own parts haha.
Edd has his own show now_
ua-cam.com/channels/6ofrdxbm3RijOx6NsMU8Sg.html
skogsgud Not much of a show yet...
It is called wheeler dealers, its not all about the fixing but also getting good deals on the car and parts, and selling it as well
We want Edd back... Shame on you for posting vid's that he appears in just to boost your views... Show will never be the same again... Edd is a true master...
No never edd is a useless mechanic
I drove PV - 544 from Connecticut and back in 1967. Great trip in a great car. 7,000 miles of graded gravel roads. I should have kept that car.
was it a b16 or a b18 engine car?
@@RollingShutter B-16 IIRC
Edd is best !! ))))
Get Edd back!
we want full shows again
Being a Moosehead brought me here. Love this Wheeler Dealers episode.
So happy to see Ed. I stopped watching when Ed left but I noticed Eds back. WELCOME BACK ED. I’m probably the only person that doesn’t know. Best wishes for your success. 😀 🤩.
Volvo Amazon is my dream car, especially the 1963! 😍
People rebuild their SUs when they don't have to. They can't get the car to run right. The Carb's won't sync.
They can't control the mixture. Before you do anything eliminate all your vacuum leaks. Put in a Petronics electronic ignition. Replace the diaphragms in the carburetors- that's a cross drive not a Phillips head screwdriver. Put some 30 weight in the dampeners-3/8". Add an aluminum heat shield and insulators between the carburetors and intake manifold. Static time the vehicle. Now you're ready to sync your carburetors and adjust the mixture. Sometimes you need rebuilding, sometimes you need to brush the throttle shafts. But for the most part they run pretty good for a long time. Same with Strombergs.
Nicely done, sir. Twin matches are so good when they work.
Bet you miss edd Now
Edd was the reason I watched Wheeler Dealer. I haven't watched since his departure.
I simply do not watch anymore; Edd's contribution WAS the show. The buying and selling was mostly filler and of only passing interest. Difficult to film? What a crock.
Edd was unique in many ways. So much talent. I guess you could call him Special Edd. Maybe he’ll get a new show and they’ll call it that.
ONE OF THE BEST ACTORS AND SHOW.S...
...Is The EddMaster back?? Please let it be true!!!!
No, this is from an old episode.
ONE OF MY DREAMCARS BUT I LIKE PV544-61 TO 62
Few people know how to adjust carburetors su. Great show
Mike bring back Edd please! Because I enjoy watching Edd than other guy, thanks
What a beautiful car
Later SU carbs have a piston lifting pin so you don't have to dismantle the filters to tune them.
Nice one Edd.
I must have watched each and every episode 20+ times now.
I wish WD my fav car show ever would come back to britain.(:-(
good job
Hi, I have a question, I am looking for a dashboard for a volvo pv 544, year 1959, can you help me find where to buy?
I WISH ID HAD A PV VOLVO
good to see EDD
Still a beautiful car
Yes I miss Ed as well damn good mechanic ,
Edd, what happened to Paul?
You should get the HIF model of the SU Carburetor instead. They are a lot better and keep the set fuel mixture a lot better. I put two on my Volvo 120 when I had one.
And you don't really need anything more than a hose to tune the idle setting - use it as a stethoscope to listen to the intake on each side. Another way of tuning the mixture is also to lift the piston on a carburetor all the way up and adjust the opposite carburetor. But it's up to the person doing the adjustment.
You can also get tuning parts for the engine at klracing.se among other places. Notice that some B18 with SU carburetors had an A-cam and some had a D-cam. The former is a pretty dull and boring cam, the D-cam has more power without being senseless like the R-cam.
Nice garage.
What’s the deal?
Man I sure wish the carb removal was in slow motion so I could see how it was done
(Song) Its coming home,its coming home,its coming,wheeler dealers is coming home.
Repeat to fade.
nice
Great content, because this is the number one problem people have with the B18 and B20.
That says a lot, as most B18's and B20's came with a single carb. Definitely one of the best engines ever made as far as quality goes. As long as you have oil, gas and water in them they will run forever. Americans tend to stand by their small block V8's which are also great engines. But I've had both small blocks, B18's, B20's as well as B30's and I would choose a Volvo engine over any small block any day of the week. =)
Patrik Einarsson If you can even find a B30, but judging by your last name you probably have an easier way to find them than me unless you live in America like me.
I live five kilometers (3 miles) from the Volvoplant in Gothenburg Sweden. And because of the extreme quality they aren't very hard to find around here. Most often they outlived the body of the cars. I hope one day you'll get your hands on a nice Volvo 164. In my opinion the best car ever produced in Sweden. They are an absolute joy to work on.
I heard that later B18 and B20 engines eventually got early forms of fuel injection because of the problems found in multi carb engines. However, I have heard that mechanical fuel injection was also problematic.
@@skylinefever If I'm not misstaken the B20 and the B30 had fuel injection as an option from 1969 and up to 1975 these engines were called B20/30E and B20/30F. The F models were designed to run on low octane unleaded fuel with a catalytic converter mainly produced for the American market. Volvo tried out both electronic as well as mechanical fuel injection during these years. The electronic type was the most common.
I clicked to find out if Edd was back !?!?
Odd to make new posts of the previous show's star.
Aren't the filters then going to alter the air/fuel mixture?
Well done! But in Austria we dont use SU Carbs, they are troublemakers. We install modern Injections and increase power at low gas consumtion.
Same thing with Girling brakes; we exchange to ATE and all problems are gone...
So, you are speaking for everyone in Austria? I am sure that there are many in Austria who value originality. There is a well-known British car restorer in Austria (both interpretations are correct) who to the best of my knowledge has never fitted FI systems or ATE brakes.
I WISHD ID HAD SOME DAY 2 PV544S AND 2 P1800S
Still an awesome vid.
Nice. 👍 🔧
I give upon these teasers
This just goes to show that Wheeler dealers is nothing without Edd
Don't you need to have the air filters on to tune it properly?
Bit cheeky still using Edd as clickbait, but a fantastic example of mechanical engineering, fast disappearing knowledge that has and replaced by electronics.
This is easy, I did it several times on my Satsuma gt.
Wow yep
His the best.👍🏻
We don't need WD, we need Edd. How about a brand new show with just Edd?
They go to extreme on fitting over 1k of air conditioning amongst everything else yet Ed couldnt change a old rusty thermostat for a couple of quid
Doesn't have the shade in front of the radiator. Must be a northern thing.
"Only $200" for SU carb rebuild kits? Those kits include what $5 worth of parts? That engine shakes like it has a vac leak or something.
What you doing WD? Edd left the show! your milking him because the new shows are shite without him.
Edd i need a rear window 544 61
i kow somvone hov git a shit ton of working pv544 and 444
Number One Edd China...
when was this show aired?
BeyondWrittenWords about 2 years ago i think
Where is Paul when you need him
Sausage Carburetors 😊
Episode from 2016
Edd: carbretah
I vote Edd.
sorry its just not wheeler dealer without Edd.
Coolt med pv
Ants ok but he's no Edd We will miss you Edd
good I am turkish I love You
ı am to
So is Edd back? I hope so. He made WD. Without him watching this show would be a waste of time.
Wheeler dealer is no good without Ed
Only one 't' n carburetor.
Edd, get rid of that irritating background noices! Who neads that in an motor video ???
Dear Edd, throw away the SU carbs - they are scrap. You NEVER get them synchron, the engine runs never good with Su's. Install a modern Injection and the
Volvo will have 20 more HP and less fuel consumption... I am old, but I've never seen a Car with 2 ore more english carbs running good!
Ed is good enough to get views but not for the show
Bring back Ed boot Mike out
From this episode on the show had a more Americanized docudrama format. I remember seeing Mike's tweets denying the format had changed at all. from this episode on i stopped watching.
Wheeler dealers without edd is like fish and chips without the fish fkng useless
I think Ford had a similar device called a "Variable venturi carb." It was't for horsepower, it was a really horrible smog device from the late 70s and early 80s.
EDIT. I never knew that Volvo made exciting cars that looked boring before they created turbo bricks.
Ed rides round on a bike, reading so called messages about what he was doing. Well.... no one can see said messaging, and he name dropped himself into ALL current tv shows, if your that good why TRY Ed????
SANDOCHEESE45 sando
Have you been sniffing glue?
I thought Edd is back... what a shame way to get viewers
Mike turned up to be a sausage
totally wrong way to check a float operation. great way to get sick .
LOL ok....
Get sick?
What are all these folk doing whining about an Ed? Get on with it.
Now if only we could get full episodes of Edds workshop segments instead of all the bullshit filler that Mike does.
WTF it was never a tutorial show ? new Wheeler Dealers cut versions for ADHD viewers .
Edd china's garage channel seems to be a dud. Whats up with Edd? is he in drug rehab or something?
You guys have no shame...
F U Mike
Ed left the show because he didn't like the way it was being produced... I've watched old and new and tbh it's not changed. The tips are still the same. Mike is still the same. It's the same. Ed chucked his toys out the pram because he thought he was bigger than the show and they would grovel to get him back,,,, he's not and they didn't
What the hell is a "Car Bretar"? If you don't speak the native tongue why not just subtitle it in Russian? I know what a carburetor is.
nice