Yonaka Motorsports 92-00 Civic w/ 3" Catback - Sound Clip and Install

This is a sound clip and install video of our 3 inch 92-00 Civic catback exhaust, including live dB reading. We are taking pre-orders at the following link:
www.yonaka.com...
This Yonaka Motorsports catback exhaust system is made of fully polished stainless steel, with 3" OD mandrel bent pipe and a 4" tip. A 2.5" to 3" flange is included. Designed for big boost applications. This exhaust does not come with a resonator.

[@goldfishninja8086]

Have mine ordered and will be here Friday. I’m excited

[@BmwMe-uh9sy]

that paint is like A1, whoever did it did a great job

[@MarkMeadows90]

Would this 3 inch exhaust sound more raspy if full length headers and test pipe were installed?

[@marcoespinoza8330]

Just got the del sol cat back and resonator only has one hook, my del sol has two rubber hangers and two hooka in that area like the one in the video damn

[@anonymousgrowmedia9286]

No permatex?

[@josecasiano7482]

Oem manifold & down pipe???

[@OilLeak]

This exhaust is much louder compared to the one with a resonater

[@vichailee5229]

Y’all don’t sell 2.5in to 3in flanges separate?

[@popclutch_100]

This would so be my daily...

[@cyledavis4982]

What is the first part you installed called. My stock pipe is 2.5 and I have a 3-inch Cat-Back exhaust that I need to install. The only thing I need is that part that increases the 2.5 to 3. The adapter. Does it have a specific name?

[@anonymousgrowmedia9286]

Exhaust shop

[@andrewreilly2311]

Wish you guys posted to the uk 😭

[@SedatedClips]

Does anyone have a link to whos civic this is.. Like insta or something. very clean build.

[@popclutch_100]

Is this exhaust louder than buddyclub spec 2?

[@jaymanansala7680]

when is the restock looking to purchase for my 99 em1

[@YonakaMotorsports]

In stock now!

[@theetridonz]

What is the first part called? The 2.5” to 3.0” adapter hub?

[@toolowsi]

Fanboy donut gasket i think not sure

[@aarongreen7249]

Have you guys ever considered making a Catback system for the 3rd generation Acura TL ?

[@alanhong4694]

would this fit my EM1?

[@riskyavb9919]

@ Yonaka Motorsports. It wouldn’t take much modification to make it work on a eg hatchback right? Just shorten the rear muffler length

[@jonathancook7624]

they have one specifically made for the eg.... check there website

[@ej1-jay393]

Can yah make more , I want to buy one for my coupe

[@YonakaMotorsports]

More are in production. You can add your email to the contact list on the product page here:
www.yonaka.com/92_00_Civic_2DR_4DR_Catback_Exhaust_EX_GX_Si_p/ymcb001-3.htm

[@josuer2208]

IG- Lsvjay preorders are up

[@ej1-jay393]

Josue R on the website? Above

[@Blu3z01]

will this fit a 97 sedan? if not what modifications would it need? or if you make one could it be linked?

[@vikings514]

Yonaka.com they make them for all models

[@orlanmedina3693]

Was that a D series? And also do u have for del sol?

[@YonakaMotorsports]

Yes sir, all stock. We're working on a Del Sol now, should be out next year. Follow us on social media for updates!

[@Unaveragebean14]

Is the 3” alot louder then the 2.5”?

[@YonakaMotorsports]

Yes, it has a larger diameter pipe and no resonator.

[@toxicboost6282]

Will this fit a 1994 civic hatchback si?

[@YonakaMotorsports]

No, it won't. Hatchbacks (EG and EK) use a different length rear muffler so this system would not fit a hatch. Sedan and coupe only at this time, but we are planning a Hatch specific version in the near future.

[@toxicboost6282]

Thats unfortunate, but hopeful I can buy one for my car. Because I have been looking for a new exhaust system. Found a DNA one that was ok, but too ricey for my liking. Just want a nice sounding exhaust, but for now im sticking to stock.

[@riskyavb9919]

@ Yonaka Motorsports. It wouldn’t take much modification to make it work on a eg hatchback right? Just shorten the rear muffler length

[@samuelspence8212]

Would this fit a Civic 95 hatch dx

[@raiderz4lyfe707]

No resonator??

[@itr_cloud]

what is the grade of the stainless steel used on your catbacks?

[@YonakaMotorsports]

Typically we use 304ss for the mufflers and resonators and the piping/hangers/flanges are 201ss. I hope that helps!

[@jsstrawder]

Assuming this car had not catylitic converter either correct?

[@alvinbaez2006]

This one had it. It would be alot louder if it didn't. Getting a Vibrant ultra quiet resonator fitted in place of the catalytic converter would make it quieter if not identical to this sound. Maybe a little less.

[@jsstrawder]

Thx for the info.

[@jsstrawder]

It shows it in the video now that I go back and watch... stupid question I guess. Apologies.

[@lukeskywalker1840]

Looks great. Just way too loud for me and I only drive 100 miles a year in my EM1.

[@finaldescent138]

When is the matte black 2.5" for eg hatch coming back in stock? Or discontinued?

[@YonakaMotorsports]

Please email customer service at [e-mail] for further info

[@bhadz100]

When are you coming up one for the rsx?

[@YonakaMotorsports]

Yes it's on our list however no time frame at the moment. Follow us on Instagram for the latest product releases!

[@AllBeefWeinerThief]

My civic has a 3 inch straight pipe all the way back. It's an lsvtec, it wouldnt sound ricey with this would it? Granted your biased, I still want an opinion lol

[@vikings514]

3 inch straight pipes sounds ricey. 3 inch Yonaka sounds like a dream.

[@ecutc3]

Please help!!!! I want to buy your exhaust. I have a 1997 civic hatchback. The cx model. It’s a single cam NON VTEC motor. I want to get your exhaust but it shows a 3 bolt flange. This car does not have a 3 bolt flange. Do you self a direct bolt on replacement for my year/model ?????

[@YonakaMotorsports]

www.yonaka.com/96_00_Honda_Civic_3DR_Hatch_CX_DX_Catback_Exhaust_p/ymcb005.htm

[@ecutc3]

Yonaka Motorsports it’s sold out 🥵

[@rootsmanuva82]

Everybody knows the blue smoke means it's a legit tuner car and you best not step 'wit it...
cause you'll get smoked 😂 😑