I'm glad I waited for the new HTVRONT AUTO HEAT PRESS 2 to be introduced! It corrects all of the problems that were mentioned by content creators, which are HEAT, PRESSE, and CLEARANCE. Thank you for your honest reviews.
These guys are awesome ordered 2 100” rolls so far and definitely ordering more. Had an issue on one and Jason reached out personally their customer support is awesome great company.
This version has just come out in Australia as has the HTVRont V2 heat press BUT Vevor price is AUD$299 less than HTVRont. I can see why now. Glad I found your review. Also the tray doesn't appear to come out as far as the new V2 HTVRont, an issue they addressed from V1, not to mention a new pressure adjustment button. Love your transfers by the way. Glad I came across your channel. Thank you
Hello, I have a problem, please I need urgent help. I have the same type of machine. My wife discovered a hidden menu... she changed the parameters... If you press setup button for 6 seconds Hidden menu appears. Nobody talks about this menu in any video. I need to know what the parameters are for each factory position. Once you enter the menu, don't change anything, my wife did it and it didn't turn out well. Can you tell me the hidden menu values that appear when you press setup for several seconds? Hold setup button SC value? Press setup again short press position appears P value? you press the setup button again it appears 1 value? You press the setup button again it appears A symbol similar to the letter E without a stripe on top After pressing the setup button again, off 30 appears I need factory settings for this menu, please help! The manufacturer doesn't know how to help me Can you respond and tell me the default values of your machine please? Factory values It's a hidden menu, no one talks about it, searching, I discovered that it has these secret settings: 1, adjust the pressure.
When you press the mode button for several seconds, another hidden menu appears It has 2 positions, it could only be that my wife also changed this setting, no one talks about it on the internet. There are 2 service menus with service parameters pressures times calibration of temperature sensors I suppose that iron heights in general can be adjusted from these menus but I do not recommend modifying parameters I need factory parameters for these menus and it is impossible to find information and I do not have another machine to see it in person
Very helpful. Had ordered one, yet to receive shipment. I've been seeing reviews of this unit and it's a big fail. Won't even open it out of the box and will be returning it! 🤷
To access the secret menu of the machine, press setup for 6 seconds, the menu will appear, changing one of the parameters, change the pressure until it crushes cardboard from 6mm to 1mm, leaving it smooth, very smooth. I need factory parameters for the secret menu, please help me. is to press the setup button for 6 seconds and reply to my comment please
Thank you for the informative video on this Press, saved me from wasting money on this one lol Ive been looking for a decent quality heat press now that I'm basically done planning and designing a ton of different designs, but I wanted to ask if I were to buy gang sheets could you guys do any last edits or adjustments to fix designs/files i turn in to ensure quality printing? Like say I forgot to make an image transparent or forgot to remove background could you guys fix that? I dont have computer to use for my designs so im using my phone.
Yes we can do touch ups to images if needed but if your artwork needs work, I would recommend sending the individual image instead of the gangsheet. This way it will be easier to work on the particular artwork. Give us a call once you place your order and we can walk you through the project.
Sounds good I'm still going to revise my edits before I turn anything in, just in case. I'll be placing orders hopefully by the end of the month so I'll definitely reach out to you guys once I place the orders. I appreciate the response and everything you guys do for the community and your fans 🙏🏽
Hola gracias por el video, una pregunta tu plancha sigue calentado una vez encendida? La mía sigue calentado y no para hasta llegar al máximo de su temperatura, me podrias ayudar? Para saber como hago para parar la temperatura. Gracias
Each printer has different settings but with "our" produced transfers, it only takes 7s to heatpress onto fabric. Some take longer so you have to constantly test test test.
I'm glad I waited for the new HTVRONT AUTO HEAT PRESS 2 to be introduced! It corrects all of the problems that were mentioned by content creators, which are HEAT, PRESSE, and CLEARANCE.
Thank you for your honest reviews.
Appreciate that, glad you found our review helpful!
Very helpful review! I'm glad I watched this.
Glad it was helpful!
@@transfersuperstarsentonces no recomendable, está bonita pero no funcional 😢
These guys are awesome ordered 2 100” rolls so far and definitely ordering more. Had an issue on one and Jason reached out personally their customer support is awesome great company.
Thank you so much! Appreciate ya
This version has just come out in Australia as has the HTVRont V2 heat press BUT Vevor price is AUD$299 less than HTVRont. I can see why now. Glad I found your review. Also the tray doesn't appear to come out as far as the new V2 HTVRont, an issue they addressed from V1, not to mention a new pressure adjustment button. Love your transfers by the way. Glad I came across your channel. Thank you
thank you so much! i’m glad this helped!
Hello, I have a problem, please I need urgent help. I have the same type of machine. My wife discovered a hidden menu... she changed the parameters... If you press setup button for 6 seconds Hidden menu appears. Nobody talks about this menu in any video. I need to know what the parameters are for each factory position. Once you enter the menu, don't change anything, my wife did it and it didn't turn out well. Can you tell me the hidden menu values that appear when you press setup for several seconds? Hold setup button SC value? Press setup again short press position appears P value? you press the setup button again it appears 1 value? You press the setup button again it appears A symbol similar to the letter E without a stripe on top After pressing the setup button again, off 30 appears I need factory settings for this menu, please help! The manufacturer doesn't know how to help me Can you respond and tell me the default values of your machine please? Factory values It's a hidden menu, no one talks about it, searching, I discovered that it has these secret settings: 1, adjust the pressure.
When you press the mode button for several seconds, another hidden menu appears It has 2 positions, it could only be that my wife also changed this setting, no one talks about it on the internet. There are 2 service menus with service parameters pressures times calibration of temperature sensors I suppose that iron heights in general can be adjusted from these menus but I do not recommend modifying parameters I need factory parameters for these menus and it is impossible to find information and I do not have another machine to see it in person
Very helpful. Had ordered one, yet to receive shipment. I've been seeing reviews of this unit and it's a big fail. Won't even open it out of the box and will be returning it! 🤷
Glad I could help
To access the secret menu of the machine, press setup for 6 seconds, the menu will appear, changing one of the parameters, change the pressure until it crushes cardboard from 6mm to 1mm, leaving it smooth, very smooth. I need factory parameters for the secret menu, please help me. is to press the setup button for 6 seconds and reply to my comment please
I have the Htvront press. I use a similar mat like this Vevor mat on mine, and I press dtf just fine. The original mat is too thin.
Thanks for the feedback, we haven't been able to get a good press using a automatic press like this.
I used htvront I did a review on it it’s not terrible it presses dtf and other transfers
I hated it! I’m returning tomorrow. I’m so sad I didn’t see your video before but I’m ordering one you reviewed before.
Oh no! Sorry you went through it. What was the deal breaker for you?
Thank you for the informative video on this Press, saved me from wasting money on this one lol Ive been looking for a decent quality heat press now that I'm basically done planning and designing a ton of different designs, but I wanted to ask if I were to buy gang sheets could you guys do any last edits or adjustments to fix designs/files i turn in to ensure quality printing? Like say I forgot to make an image transparent or forgot to remove background could you guys fix that? I dont have computer to use for my designs so im using my phone.
I'm also curious about this, I'm in the same situation
Yes we can do touch ups to images if needed but if your artwork needs work, I would recommend sending the individual image instead of the gangsheet. This way it will be easier to work on the particular artwork. Give us a call once you place your order and we can walk you through the project.
Sounds good I'm still going to revise my edits before I turn anything in, just in case. I'll be placing orders hopefully by the end of the month so I'll definitely reach out to you guys once I place the orders. I appreciate the response and everything you guys do for the community and your fans 🙏🏽
No problem that's what we're here for. Thanks Fam!
Hola gracias por el video, una pregunta tu plancha sigue calentado una vez encendida? La mía sigue calentado y no para hasta llegar al máximo de su temperatura, me podrias ayudar? Para saber como hago para parar la temperatura. Gracias
Preise bitte?
Mine won’t heat up pass 200 😭
oh no thats not good. Sounds defective to me. Most presses can go up to 400f
Sehr hilfreich, danke Dir
I feel 7 seconds is way too short. But you know more than me.
Each printer has different settings but with "our" produced transfers, it only takes 7s to heatpress onto fabric. Some take longer so you have to constantly test test test.
it's because your DTF 60 bro?@@transfersuperstars
I have the Htvront press. I use a similar mat like this Vevor mat on mine, and I press dtf just fine. The original mat is too thin.
It usually presses fine but how has the wash test been? I have almost always seen results showing premature wrinkling due to not enough pressure.
@@transfersuperstars i’ve seen some hacks where people use 2 mats on top of each other so the space is less when it closes for more pressure