Installed these and they look perfect! Easy to install as well! The only issue I ran into is that one of the LED lights does not work, but everything else 100%
That's AWESOME! The Euro tail lights were one the biggest things I wanted to do when I still had my Abarth. I'll definitely get a pair the next time I have one.
Hello.... Thanks for the video...... i had already install original led lights in my 500X 2016, and i have light on in my cluster and the led lights remains on, not possible i guess from proxy alignment i guess, so i must put a resistor...... 21W 12v(8ohm 50watt) it should be ok??? Thank you....
Guys! It's really not complicated for the LED. It's shown on the video and explained. The kit comes with the two splice connectors, simply one end to black and the other to green/white. Viola. Dont over think it.
Seriously! He explains and shows exactly what to do at the 5:32 point. If clamping 2 wires is a struggle, you shouldn't be doing mods on your car . Lol
FYI, if you have a convertible, you no longer need to modify the tail light housing for it to fit. They have included the option during checkout to indicate if you have a convertible and the housing is already cut out. Not sure why he says the harness has to match the correct lamp (RH to RH, LH to LH) or else it won't work because I put both harnesses side by side and they have the same wires going to the same spots, no difference at all between them.
I know there would be very little demand for the Euro 500L rear light assembly. Do you know if the Euro version would fit on the US model? I want it to have the amber turn signals. You guys do such great work!
At 5:32, he clearly says that to install the LED, you tap into the green/white wire and the black wire of the factory harness and then shows exactly how it's done. What is confusing you?
They did not explain the resistance part well and in the video it is not clear which cables 2 and 3 but in my 2013 Abarth 500 there is 4 which is the same as cable 3 whatever, your video is not clear in that part
At 5:32, he clearly says that you are tapping into the green/white wire and the black wire of the factory harness and then shows exactly how it's done. It doesn't matter how many wires you have, you just worry about the green/white and the black.
Awesome guys! Thank you for finally bringing us a simple set up for the Euro lights. You guys rock!
Installed these and they look perfect! Easy to install as well! The only issue I ran into is that one of the LED lights does not work, but everything else 100%
That's AWESOME! The Euro tail lights were one the biggest things I wanted to do when I still had my Abarth. I'll definitely get a pair the next time I have one.
So, from what I understand, the reversing light is in the bottom with the tuen signals but i didnt see it demo'd how does it work?
You guys are my go to, thank you for bringing this
Ho nice demonstration! What kind of resistor do you use or Where I can get one please?
Hello.... Thanks for the video...... i had already install original led lights in my 500X 2016, and i have light on in my cluster and the led lights remains on, not possible i guess from proxy alignment i guess, so i must put a resistor...... 21W 12v(8ohm 50watt) it should be ok??? Thank you....
Guys! It's really not complicated for the LED. It's shown on the video and explained. The kit comes with the two splice connectors, simply one end to black and the other to green/white. Viola. Dont over think it.
Seriously! He explains and shows exactly what to do at the 5:32 point. If clamping 2 wires is a struggle, you shouldn't be doing mods on your car . Lol
Does the assembly include Rear Fog Light? Moved to Spain and they are requiring rear fog light.
FYI, if you have a convertible, you no longer need to modify the tail light housing for it to fit. They have included the option during checkout to indicate if you have a convertible and the housing is already cut out. Not sure why he says the harness has to match the correct lamp (RH to RH, LH to LH) or else it won't work because I put both harnesses side by side and they have the same wires going to the same spots, no difference at all between them.
My night time tail lights arnt working but my brake light are will this fix the issue?
Sweet! Going to order the LED
I know there would be very little demand for the Euro 500L rear light assembly. Do you know if the Euro version would fit on the US model? I want it to have the amber turn signals. You guys do such great work!
Hi Great video, do you sale the harnests on their own? Thank you
Hello. Did you put that resistor on the signal wire from the position or Brake?
Will this be the same on a regular 500. Would assume so
Installing the reverse led is very confusing please make a video
At 5:32, he clearly says that to install the LED, you tap into the green/white wire and the black wire of the factory harness and then shows exactly how it's done. What is confusing you?
No fog tail light?
These are for US Spec cars, we don't have a fog tail light.
@@DeanMcGinnis fu cking EU...
Do they send them to Poland?
Yes they can post it to Poland.
@@e.demirovic ❤️❤️
They did not explain the resistance part well and in the video it is not clear which cables 2 and 3 but in my 2013 Abarth 500 there is 4 which is the same as cable 3 whatever, your video is not clear in that part
ik i just got to that part n now im stuck 🥲 im no electrician
At 5:32, he clearly says that you are tapping into the green/white wire and the black wire of the factory harness and then shows exactly how it's done. It doesn't matter how many wires you have, you just worry about the green/white and the black.