@@hewantsmoke83 You are welcome. I would say, make tires your next mod. PS4S 100Y rear and 96Y front. I have these and they are amazing tires. Super grippy and great shoulder reinforcement to really keep the car flat under high G-load turns, which is important to have nimbleness and responsiveness in a heavy car. Cheers!
@@hewantsmoke83 You might want to consider downsizing to 19 inches. I know you hate it, but having meaty tires on smaller rims actually helps performance. Bigger wheel with thinner tires raises roll center and also reduces grip due to less bite available on thinner sidewalls. Also, you have all of that extra rolling mass. Imagine your car will be even more insane with smaller and lighter wheels with more meaty, higher profile tires. The car will also sit a little lower. Cheers!
Hey brother great video, subscribed! what would u rate the crank pulley from 1 to 10 in terms of a boost in performance? Any issues with it? Like reliability wise?
@@ap50 it made a huge difference on the low end. I would give it an 8 out of 10 for sure. I haven’t had any issues so it’s been reliable so far. Thanks for the sub.
@@hewantsmoke83 thank you! Last question, is just crank pulley enough or do you recommend getting the other pulleys like the water pump pulley to avoid overheating issues etc
which one did you think made the most difference the tune or pulleys? I just got the wing Extenders cant wait I'm out by you we spoke before Keep up the great content! 👍
If I’m being honest I really can’t say. I was in a rush and couldn’t really test it out with just the tune. As soon as I hooked up the ECU up I RUSHED to my appointment to have the pulley’s installed. If I had to guess I would say the crank pulley due to the fact you get the 1-3 gear boost in power and acceleration. Which the RCF really needs due to the weight of the car. Hope that helps. I would definitely call into RR Racing and they could tell you for sure. I tried before replying but they are currently closed. Here’s the number. Give them a call and ask to speak to Justin is the tech guy for questions like that. Tell him Cedric told sent ya. +1 (484) 223-3263
Yes I have the RR Racing cold air intake, filter, and heat shield. The A/O separator feeds into the engine bay perfectly. I haven’t had any issues with it. I just posted a video yesterday on all my mods. You should Check it out.
I wish I could tell you. I couldn’t really get any pulls on just the tune alone. I had to rush to drop the car off to get the pulleys installed so I could Uber back home so I could pick my kids up from school on time. All I can say is that the combination of the 2 is insane on throttle response and acceleration in gears 1-3. Especially in manual mode. It’s a completely different car now. RR Racing definitely knows what their doing. That’s why I only buy their stuff. They got the Lexus down packed for sure. I wish I had the time to get the pulls in but It was just way too many cops out during the time I went to drop the car off. 😞
@@hewantsmoke83 i get it. cali is tough. i'm across the country in RI. we are not as bad as cali with mods but still pretty tough. forget about tints here too.
@@motaz1975 yea it sucks. I can’t wait for the housing market to drop. I’m definitely getting a few other houses outside of Cali and moving into one of them. Cali is getting out of control. 🤦🏾♂️
Thanks for the feed back appreciate you. Hope to catch up with you on the street I stay on canyon lake side. Talk soon! 👍
Anytime brotha. Looking forward to it
Saw a big single isf with a rr racing crank pulley n yo it spun n pulled hard 😂😂
Most definitely 💪🏾💪🏾
Nice video. Told you. Definitely, need sticky proper performance tires.
Facts
💯💯thanks bro
@@hewantsmoke83 You are welcome. I would say, make tires your next mod. PS4S 100Y rear and 96Y front. I have these and they are amazing tires. Super grippy and great shoulder reinforcement to really keep the car flat under high G-load turns, which is important to have nimbleness and responsiveness in a heavy car. Cheers!
@@2ZZGE100 sweet!! Thanks for the tip. Definitely gonna have to try them out
@@hewantsmoke83 You might want to consider downsizing to 19 inches. I know you hate it, but having meaty tires on smaller rims actually helps performance. Bigger wheel with thinner tires raises roll center and also reduces grip due to less bite available on thinner sidewalls. Also, you have all of that extra rolling mass. Imagine your car will be even more insane with smaller and lighter wheels with more meaty, higher profile tires. The car will also sit a little lower. Cheers!
Like his video everyone 🙏 may his journey continue and reach his full glory 💯
💙💙🙏🏾🙏🏾
Hey brother great video, subscribed! what would u rate the crank pulley from 1 to 10 in terms of a boost in performance? Any issues with it? Like reliability wise?
@@ap50 it made a huge difference on the low end. I would give it an 8 out of 10 for sure. I haven’t had any issues so it’s been reliable so far. Thanks for the sub.
@@hewantsmoke83 thank you! Last question, is just crank pulley enough or do you recommend getting the other pulleys like the water pump pulley to avoid overheating issues etc
@@ap50 you’ll be good with just the crank pulley.
which one did you think made the most difference the tune or pulleys? I just got the wing Extenders cant wait I'm out by you we spoke before Keep up the great content! 👍
If I’m being honest I really can’t say. I was in a rush and couldn’t really test it out with just the tune. As soon as I hooked up the ECU up I RUSHED to my appointment to have the pulley’s installed. If I had to guess I would say the crank pulley due to the fact you get the 1-3 gear boost in power and acceleration. Which the RCF really needs due to the weight of the car. Hope that helps. I would definitely call into RR Racing and they could tell you for sure. I tried before replying but they are currently closed. Here’s the number. Give them a call and ask to speak to Justin is the tech guy for questions like that. Tell him Cedric told sent ya. +1 (484) 223-3263
Great video
💙💙💙💙
Thanks for posting . Quick ?- how’s the A/O separator fit in engine bay ?Just RR tune no intake ? Have an ISF and thinking of similar u mods - thanks
Yes I have the RR Racing cold air intake, filter, and heat shield. The A/O separator feeds into the engine bay perfectly. I haven’t had any issues with it. I just posted a video yesterday on all my mods. You should Check it out.
Which one you think make a bigger difference, the tune or the pulleys?
I wish I could tell you. I couldn’t really get any pulls on just the tune alone. I had to rush to drop the car off to get the pulleys installed so I could Uber back home so I could pick my kids up from school on time. All I can say is that the combination of the 2 is insane on throttle response and acceleration in gears 1-3. Especially in manual mode. It’s a completely different car now. RR Racing definitely knows what their doing. That’s why I only buy their stuff. They got the Lexus down packed for sure. I wish I had the time to get the pulls in but It was just way too many cops out during the time I went to drop the car off. 😞
when the headers coming?
Living here in Cali. No one wants to do my headers. So sadly they probably won’t be coming. That’s the only thing I don’t have done. 🤦🏾♂️
@@hewantsmoke83 i get it. cali is tough. i'm across the country in RI. we are not as bad as cali with mods but still pretty tough. forget about tints here too.
@@motaz1975 yea it sucks. I can’t wait for the housing market to drop. I’m definitely getting a few other houses outside of Cali and moving into one of them. Cali is getting out of control. 🤦🏾♂️
🔥🔥
🙏🏾🙏🏾🙏🏾🙏🏾
Nice!!!!!
😘😘
Lets races 😂😂
Oh you want dat smoke?? Let’s get it!! Lol
Great video
🙏🏾🙏🏾🙏🏾