Це відео не доступне.
Перепрошуємо.
How To Disable A Subaru Seat Belt Alarm/ Chime
Вставка
- Опубліковано 14 сер 2024
- For more information or a written out step by step you can stop by www.thediyguy.n... . A video on how to disable a Subaru seat belt alarm/ chime.
I've been living with this since 2005. And that's all it took. Now to go find every single person who thumbs downed this video. I'm crying tears of happiness and relief
ding ding ding ding ding ding ding ding...........
literally cuz my subaru screams at me as soon as i start the car, whilst i’m driving 5mph, and when i’m not even moving. Also the intervals are like 8 seconds apart who tf made these cars like this
OH MY GOD I COULD HUG YOU. In our Outback 2012 I had to do the process twice for it to stick and be permanent, but I cannot tell you the amount of yelling and screaming this change will prevent. This infernal beeping even if you are just moving the car around the yard is a neverending source of frustration for my wife and I. Thank you for this.
Seriously, like it’s very sweet that the car is so concerned for my well being….but it can really piss off with the nonstop forklift alarm 🚨 lol
Reminds me of my wedding night, 20 times in 30 seconds.
☠️
Damn 😂
That’s what she said
No
WAM BAM THANK YOU MAAM
You can hold down the release button with one hand, and just push the buckle in 20 times. As long as the buckle goes all the way down. The red button is not where the electric switch is. The switch is pushed open by the buckle tongue.
After viewing your video, three times I tried disarming the alarm by starting the car and engaging/disengaging the seat belt 20 times with 30 seconds. It didn't work! Then I decided to read some comments from others who did the same thing. That's when I read to turn the key to the ON position rather than starting the engine. It finally worked with my 2005 Subaru Outback.
weird ernie i had the exact opposite problem with my 07 forester. i had the key in aux mode and it never worked. not till i started the car, did the 20 clicks, turned it off and pulled the key.
~ CUTOFF FUNCTION ~
The warning given after 6 seconds since the ignition switch is turned ON, and the warning function that activates when the seat belt is unfastened while driving can be optionally cut off. The cutoff function is common for both the driver’s seat and passenger’s seat, and can be set with the driver’s seat buckle switch.
Temporary (TEMP) cutoff
1) How to cut: Repeat fastening and unfastening the driver’s seat belt for 3 times within 6 seconds after turning the ignition switch ON. (The setting is changed for both the driver’s seat and passenger’s seat.)
2) Setting lasts: While the ignition switch is turned ON until it is turned OFF. (The cutoff function is canceled when the ignition switch is once turned OFF.)
~ Permanent cutoff ~
1) How to cut: Repeat fastening and unfastening the driver’s seat belt for 20 times within 30 seconds after turning the ignition switch ON. Enabling and disabling cutting is done with the same operation.
(The setting is changed for both the driver’s seat and passenger’s seat.)
2) Setting lasts: Until the microprocessor is reset*.
The cutoff function is reset when the battery is removed (battery positive terminal disconnected) or when the body integrated unit is removed. The cutting function may also be reset when the engine is cranked with low battery voltage. Your dealer can also reengage it.
TheDIYGuyDOTnet does this mess with the airbag deploy systems or any other safety features??
TheDIYGuyDOTnet how do i disable the GPS/DVD warning? so I can watch dvds while the car is moving???
2018 forester xt works
It just worked on my 2018 outback! Thank you so much
I do not see any 2013 kin in the comments. I have tried and tried and tried. 2013 Legacy. I don't know if it's a large variety of sub models, but it has the new transmission. Continuously variable transmission? Somebody called it a rubber band transmission? My dad, who has been rebuilding transmissions for the better part of forty years, told me to f-off transmission? I'm not sure it would make a difference but either I'm special in my brain when it comes to putting these steps to work. Or for some reason my particular year make and model ain't having it
2019 brz, even 8 years later and in newer cars this video still holds up. Thank you I hated that mf chime.
Worked on my 2007 Subaru Impreza. I could actually cry, I've never driven a car that had such an annoying warning. Thank you!! Blessings to you!!
That's absolutely wonderful! Worked perfectly the first time. No more annoying chime to have to suffer through. When I'm working on the car in the driveway this chime was driving me crazy. Thank you so much for the simple tutorial. Worked perfectly on our 2005 Tribeca B9.
Now if someone could tell me an easy fix to the nav/ audio power failure life would be grand. Power at fuse but don't seem to be getting to the console.
Worked for my 2006 Subaru Legacy. Trick was not turning car on all the way which I saw someone mentioned in another. comment. Just enough for the chime to start, then immediately start the 20 clicks. Thanks for the video!
Awesome, Glad you got it to work. Thanks for watching and taking the time to leave us a comment.
I have an 08 Legacy GT and can't seem to get this to work. Are you not supposed to start the car immediately after or something. I got it to work a few years ago, but I am forgetting something, lol.
Justin Bowers I think I did exactly as the video shows except I didn't actually start the ignition before the 20 clicks. I just turned the key enough for the chimes to start. Took me a few tries.
Thanks, Gisela. Keep up the Rasta dancing.
There are two ways to do it. 1. Start the car and click the seat belt in and out 20 times in 30 secs of turning the ignition switch, then turn key off and remove key, wait a few seconds insert key and start the car. (Same as in video) 2. Just turn the ignition switch to the "ON" position ( don't start car) and click the seat belt in and out 20 times in 30 secs of turning the ignition switch, then turn key off and remove key, wait a few seconds insert key and start the car. Maybe have someone run a timer and see if you get the clicks within the 30 seconds.
Ok I DID WORK… however the timing is crucial, you have to do & undo belt 20x in UNDER 30 seconds or start over.
THANK YOU 🙏🏼
I was going insane😵💫
Omg I can't believe all this time that's all it took. I know this video is 8 years old but I just did it on my 2006 Subaru Impreza and it worked perfectly. I didn't even shut the car off. Thank you, thank you, thank you.
Jesus Christ, a 20:30 ratio is extreme compared to other ones I've seen. Subaru doesn't play with those chimes
that's what I thought too... but at least it's possible.
Worked on my '07 Impreza wagon! Thanks a million dude
You're welcome, Glad we could help. Thanks for watching and and letting us know. Don't forget to give the video a thumbs up/ like. Thanks
Worked for my 2013 Outback, and I'm thrilled. I did have to do the whole process three times, but I notice in the comments other people did that, too. I'm so happy not to have to listen to the dinging anymore. Thanks DIYguy!
Awesome, Glad to hear you got it to work. You're welcome, Glad we could help. Thanks for letting us know and for watching. Don't forget to give the video a thumbs up. Thanks
Thank you thank you. I have been looking and trying g and screaming at new and me for a few months now because I could not dis-enable the seatbelt chime. I watched your video and within seconds my 2014 legacy outback is quiet. Bless you!!!!
Thank you!!! This was truly annoying when I was just sitting in my 2006 Subaru Forester
That's what I have!! It's the worst sound ever!
Same for my 2006 FXT. That chime was so annoying!
Thank you so much! Worked on my 2005 Outback after 4-5 tries. Trick is to pull the seatbelt completely out of the socket, not partially, decently quick within 30sec, then pull the key completely out. Like someone else said, you don't need to turn the car fully on, just until the chime starts. Cheers!
You're welcome, Glad you got it to work, it seems some cars like the key ON and some to accessory.
This worked for me now. It didn't work the first 2 times i tried. But I think that was the trick not turning the car on all the way prior to. Thanks! Been listening to that annoying sound for years!!
Thank you so much for adding those comments! I tried it twice without doing it exactly the way that you described, and it did nothing. Then third times a charm, I pulled the seatbelt buckle outs all the way each time and then pulled the key out of the ignition completely after I was done. And the sound, the evil sound is finally gone! By the way I always wear my seatbelt, I just don’t like to be hounded by that noise incessantly when I’m a half second from doing it anyway. Plus I do Ubereats which involves lots of jumping in and out of the car. Thanks a million to you both!!!!
@@francescabeal3025 You're welcome! Glad you sorted it out and that I could help. Ain't nobody got time for that sound lol
Thanks for adding this. Its exactly the extra info i needed for my 2005 outback! Worked first try :) 🙏🏽
I just tried this in my 2015 Outback and it worked first time; I left the car for 15 Seconds after I shut it off thanks, this is GREAT !!!
Great, Glad to hear and thanks for watching.
Worked on 2010 Impreza.
Thank you so much man - I get out of the car a lot very short stops where I really don't need a seat-belt in between to maintain upmost safety; especially if wearing a thick winter coat. And honestly it's my preference to be beeped at as little as possible... especially unpleasant beeps!
Thanks again; may you have a blessed 2020.
it worked on my 2017 Subaru Crosstrek! Thanks!
Incredible. It worked on my 2007 Outback XT Limited. Thank you so much! Greatly appreciated it!
+katanaburner You're welcome, Glad we could help. Thanks for letting us know and for watching.
2006 outback base model, didnt even get the startup chimes the second time around
You saved my sanity dude!
It worked like a dream in my 2007 Outback. I have hated that annoying alarm forever!! Thank you for the tip to shut the damn thing off ...yay!!
Worked in my 2009 Outback Limited and also in my ladies 09 Forester. Thanks man!!
worked on my 2005 legacy gt!
Thanks so much! Just upgraded from a 98 outback to a 2015 forester and with putting 30 miles on the car the chime was driving me insane while sitting in an ATM drive thru!!! Thanks a ton!
You're welcome, Glad we could help. Yes it does drive you nuts or sitting at the end of your driveway waiting for the bus with your kids.
Worked perfectly 2014 Forester XT premium.
My car with chime Non-Stop as I was driving if I put anything more than 6 oz in weight on my passenger seat. That includes my cell phone. I was forced to reach over add Buckle the passenger side seat because of the non stop chiming.
I can't believe that your solution worked! Thank you so much
Just did this on my 2019 Subaru Outback that I just picked from the lot today!
Awesome glad to hear it still works on the 2019. Thanks for letting us know as I think you are the first on a 2019. Don't forget to give the video a thumbs up. Thanks
Worked on 2017 Impreza
Great, glad to hear and thanks for letting us know.
Good to know, I have a 2017 impreza and it doesn't stop. Even if you take it out of gear and put the hand break on.
Yes it worked. It has always been so annoying in this car. It even gets louder as you continue on. I have no intention of not wearing my restraint, but just moving the car or repositioning it when you're going to get out in two seconds or when you're at a light and need to reach for something it is super annoying. So I disabled it with this method on a stock 2017 impreza 2.0i. Basically the latest N/A impreza and this method certainly works. Tried it with the engine off but ignition on and that does not work. Get in, shut the door, start the engine and immediately go to town. 20 inserts and removals in 30 seconds is what it takes. And you have to do it fast, I timed myself and it took about 22 seconds. Be sure to undo the seatbelt and turn off the car completely. Open the door because the computer still runs even with the key out on the new models. Until you open the door the radio system will still operate. Close the door, start the engine and if the seatbelt light is off when you haven't done up your seatbelt, it worked.
Another 2017 Impreza here n it worked 1st time! Thanks 👍🏼👍🏼
Worked on my 2016 impreza. Was killing me that having MINOR weight in my passenger seat (like snacks during my road trip) was triggering the seatbelt alarm. Thank you!!
Awesome, Glad to hear it worked. Thanks for watching and letting us know. Don't forget to give the video a thumbs up/ like if you haven't already. Thanks
Worked great on 2016 Impreza. I didn't test Cruise Control because I never use it anyway. Steps 1): turn key to Accessories position 2) then immediately insert and pop out the seat belt 20 times quickly 3) quickly turn key off and remove it 4) wait 30 seconds 5) start car; chime should sound about 6 times then stop. Done!
You're welcome, Glad to here it worked for you. Thanks for letting us know and for watching. Don't forget to give the video a thumbs up/ like if you haven't already. Thanks
This works on the 2019 ascent.
VergeOfChaos it is 4am right now and I was about to run outside and try this! Thanks for your comment!
Works on 2020 Ascent too - just did it. Drives my wife nuts when she backs into the garage with seatbelt off and it was dinging relentlessly. Also after she drops kids off at school it would ding when my kids unbuckle and would not stop until you turn the car off and back on.
I know this video is old but you just saved my damn life. Thank you! I was about to rip all of my wiring out from under the seat in frustration from this damn dinging! 😂
You're welcome, Glad we could help. Yes.. it is an older video but it works from when the added the seat belt chime till current year (2018). Thanks for watching and taking the time to leave us a comment. Don't forget to like or share the video.
2007 legacy 2.5i. It worked and I am beyond relieved. THANK YOU!!! I believe you just saved me from an extended stay in a psych ward! 🤣
Woohoo! Worked on my wife's '14 Outback! Thank you TheDIYGuyDOTnet!!! TY! TY! TY!. The thing drove me nuts every time I took her car out.
You're welcome, Glad we could help keep you from going nuts. lol. Thanks for letting us know and for watching. Don't forget to give the video a thumbs up/ like if you haven't already as it makes it easier for others to find the video. Thanks
you’re a god. 9 yrs later still helping !!!
Dude thank you. It worked. 2021 Ascent push start. So loud. Our old Impreza would at least stop while idling.
I tried it a second time and it worked. I twisted my fat ass sideways, held the red button down with my right hand, the just inserted the seatbelt 20 times with my left.
Thank you sooo much
2005 Subaru Outback XT.
It took me a few times to get it right.... But you just saved my sanity.
That chime was persistent!
Glad to hear you ended up getting it. Thanks for watching and taking the time to let us know. Don't forget to give the video a thumbs up/ like/ Thanks
My dude!!! I was close to 👎... But I did it wrong. Has to be EXACTLY 20 AND remove the buckle on the last one. But it worked. Light doesn't even come on now. Beautiful!
07 Forester, non-turbo.
W
This worked great on my 2010 Forester. Thank you so much for your clear and quick explanation! Some sweet relief from the gimmicky hypey UA-cam style.
2021 Outback. It worked! Sorry if you already know… I’m not reading the comments. Thank you!
2006 subaru Outback works. Yet the only thing I had to do different is to not start the car. Only turn the ignition to the on/power position to get the dash lights and Belt Safety chime. Then follow previous instructions and it works perfectly. Thank you so much. This drove me crazy. Lol. I understand and appreciate the attempt for maximum safety but was a little bit far in my opinion. Thank you again.
You're welcome, Glad we could help. Thanks for letting us know and for watching. It is a bit much with the car just running it would be better if it was set off by going over a certain speed like other cars/ trucks. Don't forget to give the video a thumbs up/ like if you haven't already. Thanks
Omg thank you for this!! It worked on my 2006 Subaru outback. It took me like 7 times to do it but I'm glad I didn't give up.
Did you do anything differently to make it work? Like ignition off at the end vs. key out of the car? I can't get it myself.
Thank you, so much! This worked flawlessly on my 2014 Outback. This little trick is saving me a TON of aggravation.
+Lorenzo Montezemolo You're welcome, Glad we could help. Thanks for letting us know and for watching.
Thank you. It works on 2014 Outback. The chime does come back if battery was disconnected or replaced. Repeat the process after battery is recommended and chime goes away again.
It's worked for my 2015 forester and outback!!
Hi. Finally you have the correct formula to annihilate that demon chime! I have a 2005 Suburu outback.
2005 Subaru OutbackIt didn't work the first time I attempted it because I was too speedy at buckling and unbuckling the seatbelt. The second time I relaxed the tempo so to speak and it worked like a charm. Thanks.
2006 Subaru outback. Bad ADD, and late night irritability... THANK YOU. it worked, though I heard the chime stop (when buckling 20x) maybe after 5 or 6 I think. Well, keep em Rollin!
You're welcome, Glad to hear you got it to work. Thanks for watching and taking the time to leave us a comment. Don't forget to give the video a thumbs up/ like if you haven';t already thanks
Worked on 2015 forester. Perfect and so simple. Thank you.
also worked on my 2022 Subaru Forester
2015 Crosstrek! Finally peace & quiet in the car! Thanks!
Worked on my 08 Outback 2.5 XT Limited. But I did it with the car off and the key in the run position. the chime would sound even when the seat belt was buckled, but now it's quiet! Thanks for the fix!
Worked on a 2006 B9 Tribeca! I always wear my seatbelt, but now I can sit in my car in peace without my seatbelt when I want 😭 Thank you!!!
IT WORKED! On our 2015 Forester. Thank you so much for this. Sometimes my wife has to unbuckle to turn around and get something for our child in the back, and the chime drives us both insane.
Great, glad to hear. You're welcome, Thanks for watching. Yes very annoying.
Worked for my 2015 Forester also! WooHoo! The car is 1 day old and that already was driving me crazy!
Just did this on my 2014 Outback. I always wear my seatbelt but sometimes I have a dog in the passenger seat or enough stuff piled on it that it triggers the chime. Drove me insane. So happy to not have to listen to it anymore
Did you have to do this on the passenger's side or just the drivers?
This worked on my 2013 Crosstrek. I didn't do the step to remove my key from ignition after all the clicking/unclicking, but it still worked fine. Thanks for saving my sanity!!!
+Evan Olsen Thanks for letting us know and for watching. Your welcome.
2006 Subaru Outback: IT WORKED!!! Thank You!
Hello, It worked 10/8/16 on my 2015 Subaru Outback!! I am thrilled. Thank you guy. You are the best!!
Really makes me wonder what else I can program, un program, disable, enable. First a key fob, then the factory alarm, now the annoying seat belt chime. Can’t wait to find out more secrets
It worked on a 2016 crosstrek. I always was curious if this disables any safety features besides the chime.
It worked. Just bought an 05 3.0r Outback. CHEERS!!
2005 legacy 25i worked like a charm first time just got it today so happy this was an easy fix Preciate it
2015 wrx works! 20times as shown exactly and worked first time! thank you! this is great for just moving the car out of the driveway and stuff.
HAH! this was the only tutorial that worked on my 2023 outback limited!
2014 frs/brz. Worked for me but it Has to be 2 clicks forward but I'm happy with that. Now I can chill with music and no chime in the background. Thanks a million! 😎
Edit: took the key out and turned 2 clicks many times and seems to be permanent but still ok with that.
Worked in my girlfriend's 2009 Subaru Forester! That was annoying. Thank you for the fix!
Did this on my 2008 Subaru Legacy 2.5i limited. Worked great thanks!
12 subaru outback. Processed Worked very well. Thank you
6
This worked perfect! My 2007 Impreza was driving me nuts with the incessant dinging as soon as it’s started. Thanks!
2006 Subaru Outback xt. Totally worked. Thanks bro!!!
2006 Impreza worked!!
You are my hero!!!
You're welcome, Glad we could help. Thanks for letting us know and for watching. Don't forget to give the video a thumbs up/ like if you haven't already. Thanks
Omg! You're a saint! 2006 subaru legacy. Had to do it 3 times but it worked.
I have a 2008 outback wagon and it worked nomore chime, the light still flashes im ok with that wondering if it worked for passenger side as well
2013 outback THANK GOD it worked!!!! Started motor clicked like 22 times and worked first time. Just went two extra in case i missed counted. : )
You're welcome. Glad to here you got it to work. Thanks for letting us know and for watching. Don't forget to give the video a thumbs up. Thanks
Thank you for posting this saved my nerves. 2007 outback
This worked on my 2005 Subaru Outback R. L.L. Bean 3.0 THANK YOU!!!
I have a Subaru STI 2016 and I did that and it worked. Thanks very much for the help, because that noise is annoying
+Aquilan Souza Great glad to hear you got it work. Thanks for watching and taking the time to leave us a comment.
2019 subaru outback works perfict! Thanks man, i doordash and in in and out constantly so that chime gets to me!! Appreciate it brotha
Just took me a couple tries, I was going to fast! If you struggle, try buckling and unbuckling at the same pace as he does in the video
Successful on a 2017 WRX. FYI, the buckle does not need to click locked. You can hold the button and rapidly insert and release the buckle 20 times. Plenty of time to accomplish 20 inserts in 30 seconds.
Glad to hear that it worked for you. Yes, You are correct you can hold the release button down and do it just need to be sure it gets fully inserted. Thanks for letting us know and for watching. Don't forget to give the video a thumbs up. Thanks
2018 Outback and you saved me
2006 Subaru Forester:
This worked, and was quite fun to do.
IT WORKED FOR MY 2020 SUBARU FORESTER!! 💪🏼
Thank god for this video. Worked on my 2006 Impreza RS.
AMAZING...… IT worked - 2017 outback - NO MORE OPEN DOOR ALARM when the motor was turned off!
THANK YOU - THANK YOU!!!!!!!
You're welcome, Glad we could help. Thanks for watching and taking the time to leave us a comment. Don't forget to give the video a thumbs up. Thanks
2007 Impreza. Worked like a charm!
Worked for my 2006 Subaru Outback wagon. Thank you!!!
Awesome, Glad to hear you got it to work. Thanks for watching and taking the time to let us know.
Wow, I couldn't believe this until I tried it, and it works! I have an Outback 2006.
Great, Glad to hear you got it to work. Thanks for watching.
I haven’t had to reset mine in years. Thanks dude
Worked on my 2015 Subaru Impreza. I had to take the passenger seat out because it was needing deep cleaning but it kept chiming. Now I can drive without the seat and have sanity!
Glad to hear it worked for you. Thanks for watching and good luck getting the seat cleaned. Thanks for watching and taking the time to leave us a comment. Don't forget to give the video a thumbs up/ like if you haven't already. Thanks
2014 Subaru outback worked thank you for the video
2018 outback 2.5i Limited worked!!!! No key but worked with start/stop button. However..... the cruise control will not work unless the seatbelt is fastened.
Worked for me
2005 Outback
2009 Forester
2011 Impreza
Woo HOO!!! Awesome, thx for sharing. We tried twice, worked the second time, difference was closing all the doors. 2014 Outback
+amy smith You're welcome, Glad we could help. Thanks for watching and letting us know.
Worked on my 2021 Subaru Ascent Limited and my mom"s 2018 Subaru Outback Touring. Much thanks!
Worked on a 2014 crosstrek. Also if you hold the release button down the whole time it still works and makes it easier. Thanks a bunch!
You're welcome, Glad we could help. Thanks for letting us know and taking the time to leave us a comment. Don't forget to give the video a thumbs up/ like if you haven't already. Thanks
Worked on a 2015 Forester. Thanks so much! That damn dinger has been driving me nuts for 3.5 years.
lol. Glad to hear you got it to work. Thanks for letting us know and for watching.
Just did it on my 2019 Impreza, worked, finally no chime. Thanks a bunch!!!
You're welcome, Glad we could help. Thanks for letting us know and for watching. Don't forget to give the video a thumbs up/ like if you haven't already. Thanks