These were "exactly" the right instructions. I'd spent close to an hour attempting to follow the key fob manufacturer's lengthy directions for programming the remote without any luck. This took no more than a couple of minutes. Wonderful job...thank you!!
subaru dealer said they couldnt program remotes i found at a junk yard that i would have to buy new remotes at ridiculous prices. thank to you i saved me hundreds of dollars.
These instructions worked perfectly on our 2005 SAAB 9-2x (which is actually a Subaru Impreza mechanically). I've tried several other videos, but yours is the one that worked flawlessly. Thanks!
This is the video! If you’re having trouble making this work the trick for my 2007 Subaru based on this video was opening and closing the doors after every step! Thank you for posting this!
I finally figured it out!!! :)) --IF YOU DON'T HEAR THE HORN SOUND AFTER TURNING KEY X10--TRY ROLLING DOWN YOUR WINDOW BEFORE YOU START THE PROCESS. IN MY CASE, THE SPEAKER WAS ON THE OUTSIDE OF THE CAR, AND YOU CAN'T HEAR IT WITH THE WINDOWS UP. Story, I was honestly a bit relieved to hear that i wasn't the only person who was having the problem where you turned the key 10 times in attempts to get to the "activation mode". I also noticed that a lot of people were saying that if you don't hear the sound, then to proceed anyways (which is true). however, it actually was there the entire time...it's just on the exterior speaker of the car; and NOT THE INTERIOR.
Super useful video! I found the fob from my old forester and was able to reprogram within seconds to my new forester because the new fob got damaged! Was sooo close to ordering a new one off of amazon too, thanks so much!!
@@xBeauGaming Questions: 1. If you'll change the battery of your remote, is this process still required? 2. How about if you replace the car battery? Thanks
I bought a generic one on Amazon for my 05 Subaru Forrester and this worked perfectly!! Thank you! The website that came with the fab wanted my credit card info and I didn't want to do that.
I watched another guy's video first......and managed to make the one fob that DID work no longer work. Car alarm went off to boot, and I was like, "WTF?!!" YOUR video had my new key fob programmed with fewer steps and programmed the very first time!!! THANK YOU!!!!!
For folks having trouble keying in digits... press lock the number of times as the digit and then press unlock ONCE and proceed to press lock corresponding to the next digit and so on. You'll hear a few beeps after the 8th digit and you will need to re-enter the entire code. Doors should unlock and lock again. Open and close door remove key and should be all set. It took a while to find a video that made it clear. (It wasn't this one)
Thanks for the post! Worked great on my 2006 forester xt using a 2008 Legacy FOB off Amazon. The only difficult part was that I had to use the lock/unlock to enter the ID#.
I reprogrammed a fob for a 2006 Subaru ... it didn't work exactly like this, but it worked. Be patient. The dealership was going to charge $75 to do it, and the best locksmith price was $35. Thanks for the instructions!
Yo thank you very much for this my key fob stopped locking my car and now since you put this video up I can drive my car and park it knowing I can set the alarm again thank you so very much my friend.
If you are having any trouble like i was it might be your trunk. I have 2 10 inch rockford fosgate subs in my 05 wrx and it knocked my trunk locking mechanism loose so i had to get it rewelded on. So it depressed it enough to show that all my doors were closed but not enough to where if i hit the lock button on my remote it wouldn't honk any more just showing flashing lights signaling it was still open and id just give the trunk a tap then it would flash again signaling it was locked. So i opened my trunk shoved a screwdriver through 1 side of the latch keeping the button depressed. Then gave the sytem program a try and it worked the 1st time after a week of trying.
thank you so much!!! very important to turn the key on-off very fast. i tried several times, and finally it worked. another difference: you had chimes and green light on the dashboard, i had horn beeping. and another thing, that they did not explain, when you press unlock to program unlock, open-close driver door, then press lock, etc. my original remote only has unlock button working, and i failed to fix the lock button. well, it is important i have a spare that can unlock me if i lock the keys inside.
I've tried to follow the instructions from the programtheremote.com site about 4 times with the fob I bought on Amazon. It didn't work. Can you explain what you did? Thanks!
I know this has worked for so many people but I am struggling here hard! I know the FOB works because I got it from a reputable source that I've purchased ones for other cars in the past (plus, I've now tried three different FOBS - at this point I should just hire a locksmith but now I'm determined!). I have an '09 forester. I get all the right beeps and sounds but the remote just doesn't work. I'm wondering if there's some setting I turned off somewhere that disables any FOB access? Something to do with the alarm maybe? Open to any and all ideas! Thanks!
I'm not seeing these instructions, not seeing the link except to cars101 which is the ones I pulled pertaining to my 2006 Subaru Forester. Every other instruction has you entering the number using lock/unlock buttons. That's not even getting me past the initial special beep, just the seat belt beep
Hi, this is an older video so I really hope you'll get this. I did this video a couple days ago exactly and It worked, but today I went to start my car and it wouldn't start. I then noticed it was in valet mode. I checked youtube as well as my user manual and it would not come out of valet mode. At first the new remote was still letting me lock and unlock, but now it's not even doing that and my power locks aren't working either. I have to physically flip the locks. I also hear a weird clicking noise in the on the passengers side. And there is a continuous honk. Not loud like the alarm, but similar to the honking in the video and it keeps happening every few seconds. I was hoping you might have an idea I could try so I wouldn't have to get my car towed to Subaru. Any advice would be greatly appreciated.
Questions: 1. If you'll change the battery of your remote, is this process still required? 2. How about if you replace the car battery? Thanks @xbeau Gaming
I thought I did this correctly, my 2005 Subaru wrx beeped when and how it should. When I pressed the fob to use it though, the hazards flashed and the car didn’t lock. What does this mean? Pressed the fob later on standing outside the car and it didn’t work at all.
Does the trunk feature on your Fob work? I have 2005 Impreza RS too. doesn't seem to have a power actuator on the trunk lock. just the old style release handle inside.
This Boy scares Me! I have done this once and YES,dead Battery!! My question,I am sure will never get answered is this. I have TWO remotes from My old 2003 Outback. I bought a 2005 Impreza RS. Can I program those older remotes to work with the newer 2005 Impreza Rs? Any knowledgeable help would be appreciated. Thanks,Troy.
Hey folks! Question: Can I follow the same steps in this video for a fob that used to work but suddenly doesn’t? Every once in a while it simply won’t work- almost as if another signal is canceling it out. The battery is brand new. Usually it lasts a few hours, but today it was all day. The alarm goes off when I open the locked car with a key. Should I try this video’s approach, even though the fob isn’t new? I’m afraid I’ll mess something up and the alarm will go off without stopping or that the alarm will sound in the middle of the night or something ! Is it worth a try, or is this video only relevant for brand-new fobs only? Thanks!!!!!
Someone pleeeeeeease help me!! I've been trying to program it for days but my car will not go into programming mode! My car is a 2006 Subaru Impreza and I've done everything as it is in the video but after switching the key to ON position 10 times within 10 seconds it never honks or starts beeping. PLEASE SOMEONE HELP!
but it never honks after turning the switch from off to on 10 times within 15 seconds.. the car never goes into programming mode. PLEASE SOMEONE HELP!!!
This doesn't work on Subarus made 2006 and later. You need the internal security code of the fob for those and have to use the door lock to enter the numbers twice.
Hi man!!! Nice video! How many controls can I program in my car? I have one key working and I want another one. Is the car will work with both? Thanks a lot!!!
This has not worked for me. My 05 Impreza does not have an alarm and not matter how many time I follow the first three steps to enter programming mode, the car will not engage. Turned the key at the exact same rate as this video, Lock to ON as suggested. Car does NOT enter programming mode 🤷🏻♂️
@@xBeauGaming Damn. I have immobilizer, might be a trip to a official service... if they even recognize these old ones anymore :) Thanks for an answer.
These were "exactly" the right instructions. I'd spent close to an hour attempting to follow the key fob manufacturer's lengthy directions for programming the remote without any luck. This took no more than a couple of minutes. Wonderful job...thank you!!
Your instructions are much simpler than the manufacturer's instructions, and they worked for my 2009 Subaru Forester. Thank you!
subaru dealer said they couldnt program remotes i found at a junk yard that i would have to buy new remotes at ridiculous prices. thank to you i saved me hundreds of dollars.
These instructions worked perfectly on our 2005 SAAB 9-2x (which is actually a Subaru Impreza mechanically). I've tried several other videos, but yours is the one that worked flawlessly. Thanks!
Best part about this video is that he links to the pages he holds in his hands. Props and thanks for that - great site and resource.
Just did it for my 2004 WRX, with two different style fobs. Local dealer quoted $100 each to get paired. Thanks for saving me $200
You've made me a content man today. I'm just gonna leave it at that
This is the video!
If you’re having trouble making this work the trick for my 2007 Subaru based on this video was opening and closing the doors after every step!
Thank you for posting this!
I finally figured it out!!! :))
--IF YOU DON'T HEAR THE HORN SOUND AFTER TURNING KEY X10--TRY ROLLING DOWN YOUR WINDOW BEFORE YOU START THE PROCESS. IN MY CASE, THE SPEAKER WAS ON THE OUTSIDE OF THE CAR, AND YOU CAN'T HEAR IT WITH THE WINDOWS UP.
Story,
I was honestly a bit relieved to hear that i wasn't the only person who was having the problem where you turned the key 10 times in attempts to get to the "activation mode". I also noticed that a lot of people were saying that if you don't hear the sound, then to proceed anyways (which is true). however, it actually was there the entire time...it's just on the exterior speaker of the car; and NOT THE INTERIOR.
Super useful video! I found the fob from my old forester and was able to reprogram within seconds to my new forester because the new fob got damaged! Was sooo close to ordering a new one off of amazon too, thanks so much!!
Ryan Rahimly Glad to help, and I'm sure you made better use of that 150 bucks to let the dealer do this right ;)
You know it my man, thanks again!! :)
@@xBeauGaming
Questions:
1. If you'll change the battery of your remote, is this process still required?
2. How about if you replace the car battery?
Thanks
You make it look easy, you have completely de-mystified the process. Thank you.
Awesome! Manufacturers instructions didn’t work, yours did! Thank you
Same here!
Thanks! Your video on reprogramming the Subaru Key Fob really helped to stop my stress level!
Bro really tipped
Thanks, xBeau. Worked like a champ on my '05 Forester. Gotta turn the key 10X fast. I was going too slow in my earlier attempts.
Great vid. Super helpful. FYI all, only two key fobs can be programmed to the car at any given time. Took me a few mins to figure that out.
I bought a generic one on Amazon for my 05 Subaru Forrester and this worked perfectly!! Thank you! The website that came with the fab wanted my credit card info and I didn't want to do that.
Very helpful. Thank you
I did on second attempt. The key MUST be turn on-off fast as the video!
Thank you for your help.
Keep up the good contents
This One bit. Helped 👏🏼
🙏🏼
Worked perfectly for both my key fobs on my 2005 RS impreza, thank you!
Glad to help buddy!
I watched another guy's video first......and managed to make the one fob that DID work no longer work. Car alarm went off to boot, and I was like, "WTF?!!"
YOUR video had my new key fob programmed with fewer steps and programmed the very first time!!! THANK YOU!!!!!
Glad to help!
@@xBeauGaming You just earned yourself a subscriber, my friend!!
For folks having trouble keying in digits... press lock the number of times as the digit and then press unlock ONCE and proceed to press lock corresponding to the next digit and so on. You'll hear a few beeps after the 8th digit and you will need to re-enter the entire code. Doors should unlock and lock again. Open and close door remove key and should be all set. It took a while to find a video that made it clear. (It wasn't this one)
This was really helpful. Thank you for making this so straightforward. Nicely done.
Thanks for the post!
Worked great on my 2006 forester xt using a 2008 Legacy FOB off Amazon.
The only difficult part was that I had to use the lock/unlock to enter the ID#.
That with the method of hitting the lock button for the number and the unlock to go to the next number
You just helped me so much , I followed your instructions and it worked perfectly!
I reprogrammed a fob for a 2006 Subaru ... it didn't work exactly like this, but it worked. Be patient. The dealership was going to charge $75 to do it, and the best locksmith price was $35. Thanks for the instructions!
Hi, how did you do it ?
@@estebangiovanniello4927 Same question, what was different for you? I'm having a heck of a time here!
Worked great on my 04 wrx.. tip turn the key fast as he does 10 times . I was doing slower and wasn’t getting the beep. Thankssss
This worked on my 2005 Subaru Forester. Thanks
Glad to help
The only video that was the good procedure for my 2005 sti.
Thx
Yo thank you very much for this my key fob stopped locking my car and now since you put this video up I can drive my car and park it knowing I can set the alarm again thank you so very much my friend.
Amazing! Worked for the Subaru 2005 Forester.
Better than doing the lock unlock codes.
Worked a charm with my 2005 Saab 9-2X, which is a rebadged Impreza! Thank you!
So much easier to do then the print out subaru gave me! Thank you!!!
Thanks XBeau, this was just what I needed, I think. Good work and time well spent.
No worries, glad to help
Thanks for the video! I just programmed a new remote for my 2005 STI.
If you are having any trouble like i was it might be your trunk. I have 2 10 inch rockford fosgate subs in my 05 wrx and it knocked my trunk locking mechanism loose so i had to get it rewelded on. So it depressed it enough to show that all my doors were closed but not enough to where if i hit the lock button on my remote it wouldn't honk any more just showing flashing lights signaling it was still open and id just give the trunk a tap then it would flash again signaling it was locked. So i opened my trunk shoved a screwdriver through 1 side of the latch keeping the button depressed. Then gave the sytem program a try and it worked the 1st time after a week of trying.
Awsome! These instructions worked for my 2002 Outback!!
Without you I would be paying $200-$300 just for that simple thing. I appreciate u 💯💯💯💯
what about the trunk?
thank you so much!!! very important to turn the key on-off very fast. i tried several times, and finally it worked. another difference: you had chimes and green light on the dashboard, i had horn beeping. and another thing, that they did not explain, when you press unlock to program unlock, open-close driver door, then press lock, etc.
my original remote only has unlock button working, and i failed to fix the lock button. well, it is important i have a spare that can unlock me if i lock the keys inside.
Thanks bro! This worked for my 05 Impreza! Thanks for sharing!
2006 Tribeca B9 worked a little differently. Mix between this and using the door to enter the Fob key number twice.
I've tried to follow the instructions from the programtheremote.com site about 4 times with the fob I bought on Amazon. It didn't work. Can you explain what you did? Thanks!
thank you bro, it worked on my car, same 05 impreza RS.
Thanks worked as a charm on a 05 sti
You saved me 50$ at a dealership besides the 176.00 it costs which I'm keeping my 06 WRX Limited sedan JDM
I wonder sometimes how much cash this video has saved my fellow Subabros
I know this has worked for so many people but I am struggling here hard! I know the FOB works because I got it from a reputable source that I've purchased ones for other cars in the past (plus, I've now tried three different FOBS - at this point I should just hire a locksmith but now I'm determined!). I have an '09 forester. I get all the right beeps and sounds but the remote just doesn't work. I'm wondering if there's some setting I turned off somewhere that disables any FOB access? Something to do with the alarm maybe? Open to any and all ideas! Thanks!
What if my 8 digit code has letters in it?
Does the actual key itself need to be programmed? you’re just using a blade but I thought that the key itself also needs to be programmed?
Thanx very much , got it on the first try. This is the simplest way I have found so far👍🏾👍🏾
Will this unlock the alarm so that I can drive the damn thing? I lost my key fob and haven't been able to drive the vehicle
Same vehicle. Worked perfect for me!
I'm not seeing these instructions, not seeing the link except to cars101 which is the ones I pulled pertaining to my 2006 Subaru Forester. Every other instruction has you entering the number using lock/unlock buttons. That's not even getting me past the initial special beep, just the seat belt beep
Thank you! Worked flawlessly
Yea! I swear this video has cost Subaru dealers millions over the years in lost revenue
Hi, this is an older video so I really hope you'll get this. I did this video a couple days ago exactly and
It worked, but today I went to start my car and it wouldn't start. I then noticed it was in valet mode. I checked youtube as well as my user manual and it would not come out of valet mode. At first the new remote was still letting me lock and unlock, but now it's not even doing that and my power locks aren't working either. I have to physically flip the locks. I also hear a weird clicking noise in the on the passengers side. And there is a continuous honk. Not loud like the alarm, but similar to the honking in the video and it keeps happening every few seconds. I was hoping you might have an idea I could try so I wouldn't have to get my car towed to Subaru. Any advice would be greatly appreciated.
Will this be the same programming instructions for a 2008 impreza? The one video i saw includes a bunch of numbers and looks complicated to do. Thanks
Worked great took about 30 seconds vey good video
It didn’t work on my Subaru Impreza
I have 06 impreza 2.5i wagon and I’ve tried two different set of instructions and nothing works, would this work on that model?
Questions:
1. If you'll change the battery of your remote, is this process still required?
2. How about if you replace the car battery?
Thanks @xbeau Gaming
It doesn't deprogram, you're good to go
@@xBeauGaming ok thanks for the reply man! Was really having second thoughts lol. More power to your channel!
Will this work on my 09 Forester and will the old remote fobs still work. Thanks for your reply.
A GM did it work??
Worked like a charm! Thanks so much!
I thought I did this correctly, my 2005 Subaru wrx beeped when and how it should. When I pressed the fob to use it though, the hazards flashed and the car didn’t lock. What does this mean? Pressed the fob later on standing outside the car and it didn’t work at all.
Worked perfectly. Thank you.
Well done, a Subaru dealer will change $100 per hour, even though it takes less than 1 minute.
Same for 2003? I can't get it to work.
How come the trunk button on my fob doesn’t open the trunk? I get two beeps but nothing opens
Did you ever figure it out?
Stuff like this feel like old video game cheats to have yoshi in pokemon or somthing but like it actually works lol
Does the trunk feature on your Fob work? I have 2005 Impreza RS too. doesn't seem to have a power actuator on the trunk lock. just the old style release handle inside.
I can’t get into programming mode with the ten switches because my key keeps getting stuck. Is there another way? What should I do?
Great video but what about the subaru wagon model does the button need to be programed as well for the rear door
This Boy scares Me! I have done this once and YES,dead Battery!! My question,I am sure will never get answered is this. I have TWO remotes from My old 2003 Outback. I bought a 2005 Impreza RS. Can I program those older remotes to work with the newer 2005 Impreza Rs? Any knowledgeable help would be appreciated. Thanks,Troy.
Hey folks! Question: Can I follow the same steps in this video for a fob that used to work but suddenly doesn’t? Every once in a while it simply won’t work- almost as if another signal is canceling it out. The battery is brand new. Usually it lasts a few hours, but today it was all day. The alarm goes off when I open the locked car with a key. Should I try this video’s approach, even though the fob isn’t new? I’m afraid I’ll mess something up and the alarm will go off without stopping or that the alarm will sound in the middle of the night or something ! Is it worth a try, or is this video only relevant for brand-new fobs only? Thanks!!!!!
It’s a 2012 Subaru Forester by the way.
Why other original key fob you need to program the 8digit code, how did you do it not using the 8digit code
hell yeah bro i made it whild watching the video it worked right away . thanks !
Someone pleeeeeeease help me!! I've been trying to program it for days but my car will not go into programming mode! My car is a 2006 Subaru Impreza and I've done everything as it is in the video but after switching the key to ON position 10 times within 10 seconds it never honks or starts beeping. PLEASE SOMEONE HELP!
after you switch the on and off, you have to open and close the door
but it never honks after turning the switch from off to on 10 times within 15 seconds.. the car never goes into programming mode. PLEASE SOMEONE HELP!!!
i have too in forester 2006-2007 this method not work !!!
we have pilot with 2 keys = only lock + unlock
help, help, please
My 2007 forester is doing the exact same. Did you ever get yours to take?
Mynor Cornejo hello. Did you ever get this issue to work? What's the trick to programming a new fob?
Awesome - tried everything - this worked!!!
This doesn't work on Subarus made 2006 and later. You need the internal security code of the fob for those and have to use the door lock to enter the numbers twice.
Succint, informative, helpful. Thanks!
I got 2001 subaru Forester 5 speed. I can't get it to beep once for the life of me. Tried all your steps
for an 07 forester does it unlock the boot as well when you use the new fob??
Will this work for a 2013 outback?
Thank dear friend, I'm in the parking lot and I want to go shop now
Why is my car not honking when I’m going from lock to on 10 times within 15 seconds
Hi man!!! Nice video! How many controls can I program in my car? I have one key working and I want another one. Is the car will work with both? Thanks a lot!!!
i happen to have the same car ill keep this in mind if i need it in the future thanks
Totally recommend it bud, its making a huge difference in my enjoyment of the car
g
This has not worked for me. My 05 Impreza does not have an alarm and not matter how many time I follow the first three steps to enter programming mode, the car will not engage. Turned the key at the exact same rate as this video, Lock to ON as suggested. Car does NOT enter programming mode 🤷🏻♂️
can you program 2 key fobs to work?
up to 4
Can I used the same old one
how and where do i buy it for a subaru impreza hatchback 2012 please help me thank you so much
Will this work for a 2011 Impreza? I have the same remote that you are showing.
You just saved me $200 thanks!
Nice job! Thanks so much as it got mine working.
Thank you .Worked perfect
I`have problem
in forester 2006-2007 this method not work !!!
have pilot with 2 keys = only lock + unlock
help, help, please
Did u managed to fix it?
I have the same problem, this doesn’t work with my forester 2006
It was very useful. I just programmed mine.
hi, would this work for a Subaru forester 2009> I don't the manual on the description to read. thanks
Evelise Gomes did it work?
what happens if you have an alarm does this also set alarm and disarm it?
Thanks sir. Working now!
I have to ask, do you have immobilizer on your car? Or alarm?
Nope
@@xBeauGaming Damn. I have immobilizer, might be a trip to a official service... if they even recognize these old ones anymore :) Thanks for an answer.
Stupid question, does it actually open the trunk?
It didnt for my Subaru but maybe for others...
@@xBeauGaming Thanks for the response.
Gracias hermano
Does anyone know if this will still work if your car has a turbo timer on it